From: Florian Fainelli <f.fainelli@gmail.com>
To: netdev@vger.kernel.org
Cc: arunp@broadcom.com, Florian Fainelli <f.fainelli@gmail.com>,
Andrew Lunn <andrew@lunn.ch>,
"David S. Miller" <davem@davemloft.net>,
Ray Jui <rjui@broadcom.com>,
Scott Branden <sbranden@broadcom.com>,
Jon Mason <jonmason@broadcom.com>,
bcm-kernel-feedback-list@broadcom.com (maintainer:BROADCOM IPROC
ARM ARCHITECTURE),
linux-arm-kernel@lists.infradead.org (moderated list:BROADCOM
IPROC ARM ARCHITECTURE), linux-kernel@vger.kernel.org (open list)
Subject: [PATCH net] net: phy: broadcom: Fix bcm_write_exp()
Date: Tue, 22 May 2018 17:04:49 -0700 [thread overview]
Message-ID: <20180523000450.9384-1-f.fainelli@gmail.com> (raw)
On newer PHYs, we need to select the expansion register to write with
setting bits [11:8] to 0xf. This was done correctly by bcm7xxx.c prior
to being migrated to generic code under bcm-phy-lib.c which
unfortunately used the older implementation from the BCM54xx days.
Fix this by creating an inline stub: bcm_write_exp_sel() which adds the
correct value (MII_BCM54XX_EXP_SEL_ER) and update both the Cygnus PHY
and BCM7xxx PHY drivers which require setting these bits.
broadcom.c is unchanged because some PHYs even use a different selector
method, so let them specify it directly (e.g: SerDes secondary selector).
Fixes: a1cba5613edf ("net: phy: Add Broadcom phy library for common interfaces")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
---
David, please also queue this one up for -stable, thanks!
drivers/net/phy/bcm-cygnus.c | 6 +++---
drivers/net/phy/bcm-phy-lib.h | 7 +++++++
drivers/net/phy/bcm7xxx.c | 4 ++--
3 files changed, 12 insertions(+), 5 deletions(-)
diff --git a/drivers/net/phy/bcm-cygnus.c b/drivers/net/phy/bcm-cygnus.c
index 6838129839ca..e757b09f1889 100644
--- a/drivers/net/phy/bcm-cygnus.c
+++ b/drivers/net/phy/bcm-cygnus.c
@@ -61,17 +61,17 @@ static int bcm_cygnus_afe_config(struct phy_device *phydev)
return rc;
/* make rcal=100, since rdb default is 000 */
- rc = bcm_phy_write_exp(phydev, MII_BRCM_CORE_EXPB1, 0x10);
+ rc = bcm_phy_write_exp_sel(phydev, MII_BRCM_CORE_EXPB1, 0x10);
if (rc < 0)
return rc;
/* CORE_EXPB0, Reset R_CAL/RC_CAL Engine */
- rc = bcm_phy_write_exp(phydev, MII_BRCM_CORE_EXPB0, 0x10);
+ rc = bcm_phy_write_exp_sel(phydev, MII_BRCM_CORE_EXPB0, 0x10);
if (rc < 0)
return rc;
/* CORE_EXPB0, Disable Reset R_CAL/RC_CAL Engine */
- rc = bcm_phy_write_exp(phydev, MII_BRCM_CORE_EXPB0, 0x00);
+ rc = bcm_phy_write_exp_sel(phydev, MII_BRCM_CORE_EXPB0, 0x00);
return 0;
}
diff --git a/drivers/net/phy/bcm-phy-lib.h b/drivers/net/phy/bcm-phy-lib.h
index 7c73808cbbde..81cceaa412fe 100644
--- a/drivers/net/phy/bcm-phy-lib.h
+++ b/drivers/net/phy/bcm-phy-lib.h
@@ -14,11 +14,18 @@
#ifndef _LINUX_BCM_PHY_LIB_H
#define _LINUX_BCM_PHY_LIB_H
+#include <linux/brcmphy.h>
#include <linux/phy.h>
int bcm_phy_write_exp(struct phy_device *phydev, u16 reg, u16 val);
int bcm_phy_read_exp(struct phy_device *phydev, u16 reg);
+static inline int bcm_phy_write_exp_sel(struct phy_device *phydev,
+ u16 reg, u16 val)
+{
+ return bcm_phy_write_exp(phydev, reg | MII_BCM54XX_EXP_SEL_ER, val);
+}
+
int bcm54xx_auxctl_write(struct phy_device *phydev, u16 regnum, u16 val);
int bcm54xx_auxctl_read(struct phy_device *phydev, u16 regnum);
diff --git a/drivers/net/phy/bcm7xxx.c b/drivers/net/phy/bcm7xxx.c
index 29b1c88b55cc..01d2ff2f6241 100644
--- a/drivers/net/phy/bcm7xxx.c
+++ b/drivers/net/phy/bcm7xxx.c
@@ -65,10 +65,10 @@ struct bcm7xxx_phy_priv {
static void r_rc_cal_reset(struct phy_device *phydev)
{
/* Reset R_CAL/RC_CAL Engine */
- bcm_phy_write_exp(phydev, 0x00b0, 0x0010);
+ bcm_phy_write_exp_sel(phydev, 0x00b0, 0x0010);
/* Disable Reset R_AL/RC_CAL Engine */
- bcm_phy_write_exp(phydev, 0x00b0, 0x0000);
+ bcm_phy_write_exp_sel(phydev, 0x00b0, 0x0000);
}
static int bcm7xxx_28nm_b0_afe_config_init(struct phy_device *phydev)
--
2.14.1
next reply other threads:[~2018-05-23 0:04 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-05-23 0:04 Florian Fainelli [this message]
2018-05-23 0:15 ` [PATCH net] net: phy: broadcom: Fix bcm_write_exp() Andrew Lunn
2018-05-23 1:20 ` Florian Fainelli
2018-05-23 16:57 ` Florian Fainelli
2018-05-23 19:27 ` David Miller
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180523000450.9384-1-f.fainelli@gmail.com \
--to=f.fainelli@gmail.com \
--cc=andrew@lunn.ch \
--cc=arunp@broadcom.com \
--cc=bcm-kernel-feedback-list@broadcom.com \
--cc=davem@davemloft.net \
--cc=jonmason@broadcom.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=netdev@vger.kernel.org \
--cc=rjui@broadcom.com \
--cc=sbranden@broadcom.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).