linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Leonard Crestez <leonard.crestez@nxp.com>
To: Andrey Smirnov <andrew.smirnov@gmail.com>,
	Philipp Zabel <p.zabel@pengutronix.de>,
	Lucas Stach <l.stach@pengutronix.de>,
	Richard Zhu <hongxing.zhu@nxp.com>,
	linux-pci@vger.kernel.org, linux-pm@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org
Cc: Bjorn Helgaas <bhelgaas@google.com>,
	Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>,
	Anson Huang <Anson.Huang@nxp.com>,
	Jingoo Han <jingoohan1@gmail.com>,
	Joao Pinto <Joao.Pinto@synopsys.com>,
	"Rafael J. Wysocki" <rjw@rjwysocki.net>,
	Abel Vesa <abel.vesa@nxp.com>
Subject: [PATCH 2/2] PCI: imx: Initial imx7d pm support
Date: Tue, 29 May 2018 22:39:17 +0300	[thread overview]
Message-ID: <a6176c8bcfbca08ce4e93e304bdcd48c4600f8e2.1527621510.git.leonard.crestez@nxp.com> (raw)
In-Reply-To: <cover.1527621510.git.leonard.crestez@nxp.com>

On imx7d the phy is turned off in suspend and must be reset on resume.
Right now lspci -v fails after a suspend/resume cycle, fix this by
adding minimal suspend/resume code from the nxp vendor tree.

This is currently only enabled for imx7 but the same sequence can be
applied to other imx pcie variants.

Tested on imx7d-sabresd with an Intel 5622ANHMW wireless pcie adapter.

The original author is mostly Richard Zhu <hongxing.zhu@nxp.com>, this
patch adjusts the code to the upstream imx7d implemention using reset
controls and power domains.

Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com>
---
 drivers/pci/dwc/pci-imx6.c | 94 ++++++++++++++++++++++++++++++++++++--
 1 file changed, 89 insertions(+), 5 deletions(-)

diff --git a/drivers/pci/dwc/pci-imx6.c b/drivers/pci/dwc/pci-imx6.c
index 4818ef875f8a..ff6077eeb387 100644
--- a/drivers/pci/dwc/pci-imx6.c
+++ b/drivers/pci/dwc/pci-imx6.c
@@ -540,10 +540,27 @@ static int imx6_pcie_wait_for_speed_change(struct imx6_pcie *imx6_pcie)
 
 	dev_err(dev, "Speed change timeout\n");
 	return -EINVAL;
 }
 
+static void imx6_pcie_ltssm_enable(struct device *dev)
+{
+	struct imx6_pcie *imx6_pcie = dev_get_drvdata(dev);
+
+	switch (imx6_pcie->variant) {
+	case IMX6Q:
+	case IMX6SX:
+	case IMX6QP:
+		regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR12,
+				   IMX6Q_GPR12_PCIE_CTL_2,
+				   IMX6Q_GPR12_PCIE_CTL_2);
+		break;
+	case IMX7D:
+		reset_control_deassert(imx6_pcie->apps_reset);
+	}
+}
+
 static int imx6_pcie_establish_link(struct imx6_pcie *imx6_pcie)
 {
 	struct dw_pcie *pci = imx6_pcie->pci;
 	struct device *dev = pci->dev;
 	u32 tmp;
@@ -558,15 +575,11 @@ static int imx6_pcie_establish_link(struct imx6_pcie *imx6_pcie)
 	tmp &= ~PCIE_RC_LCR_MAX_LINK_SPEEDS_MASK;
 	tmp |= PCIE_RC_LCR_MAX_LINK_SPEEDS_GEN1;
 	dw_pcie_writel_dbi(pci, PCIE_RC_LCR, tmp);
 
 	/* Start LTSSM. */
-	if (imx6_pcie->variant == IMX7D)
-		reset_control_deassert(imx6_pcie->apps_reset);
-	else
-		regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR12,
-				   IMX6Q_GPR12_PCIE_CTL_2, 1 << 10);
+	imx6_pcie_ltssm_enable(dev);
 
 	ret = imx6_pcie_wait_for_link(imx6_pcie);
 	if (ret)
 		goto err_reset_phy;
 
@@ -681,10 +694,80 @@ static int imx6_add_pcie_port(struct imx6_pcie *imx6_pcie,
 
 static const struct dw_pcie_ops dw_pcie_ops = {
 	.link_up = imx6_pcie_link_up,
 };
 
+#ifdef CONFIG_PM_SLEEP
+static int imx6_pcie_suspend_noirq(struct device *dev)
+{
+	struct imx6_pcie *imx6_pcie = dev_get_drvdata(dev);
+
+	if (imx6_pcie->variant == IMX7D) {
+		/* Disable clks */
+		clk_disable_unprepare(imx6_pcie->pcie);
+		clk_disable_unprepare(imx6_pcie->pcie_phy);
+		clk_disable_unprepare(imx6_pcie->pcie_bus);
+		/* turn off external osc input */
+		regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR12,
+				   IMX7D_GPR12_PCIE_PHY_REFCLK_SEL,
+				   IMX7D_GPR12_PCIE_PHY_REFCLK_SEL);
+	}
+
+	return 0;
+}
+
+static void imx6_pcie_ltssm_disable(struct device *dev)
+{
+	struct imx6_pcie *imx6_pcie = dev_get_drvdata(dev);
+
+	switch (imx6_pcie->variant) {
+	case IMX6Q:
+	case IMX6SX:
+	case IMX6QP:
+		regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR12,
+				   IMX6Q_GPR12_PCIE_CTL_2, 0);
+		break;
+	case IMX7D:
+		reset_control_assert(imx6_pcie->apps_reset);
+		break;
+	}
+}
+
+static int imx6_pcie_resume_noirq(struct device *dev)
+{
+	int ret = 0;
+	struct imx6_pcie *imx6_pcie = dev_get_drvdata(dev);
+	struct pcie_port *pp = &imx6_pcie->pci->pp;
+
+	if (imx6_pcie->variant == IMX7D) {
+		imx6_pcie_ltssm_disable(dev);
+
+		imx6_pcie_assert_core_reset(imx6_pcie);
+		imx6_pcie_init_phy(imx6_pcie);
+		imx6_pcie_deassert_core_reset(imx6_pcie);
+
+		/*
+		 * controller maybe turn off, re-configure again
+		 */
+		dw_pcie_setup_rc(pp);
+
+		imx6_pcie_ltssm_enable(dev);
+
+		ret = imx6_pcie_wait_for_link(imx6_pcie);
+		if (ret < 0)
+			pr_info("pcie link is down after resume.\n");
+	}
+
+	return 0;
+}
+
+static const struct dev_pm_ops imx6_pcie_pm_ops = {
+	SET_NOIRQ_SYSTEM_SLEEP_PM_OPS(imx6_pcie_suspend_noirq,
+				      imx6_pcie_resume_noirq)
+};
+#endif
+
 static int imx6_pcie_probe(struct platform_device *pdev)
 {
 	struct device *dev = &pdev->dev;
 	struct dw_pcie *pci;
 	struct imx6_pcie *imx6_pcie;
@@ -847,10 +930,11 @@ static const struct of_device_id imx6_pcie_of_match[] = {
 static struct platform_driver imx6_pcie_driver = {
 	.driver = {
 		.name	= "imx6q-pcie",
 		.of_match_table = imx6_pcie_of_match,
 		.suppress_bind_attrs = true,
+		.pm = &imx6_pcie_pm_ops,
 	},
 	.probe    = imx6_pcie_probe,
 	.shutdown = imx6_pcie_shutdown,
 };
 
-- 
2.17.0

  parent reply	other threads:[~2018-05-29 19:39 UTC|newest]

Thread overview: 11+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-05-29 19:39 [PATCH 0/2] PCI: Initial imx7d pm support Leonard Crestez
2018-05-29 19:39 ` [PATCH 1/2] reset: imx7: Fix always writing bits as 0 Leonard Crestez
2018-06-08 14:23   ` Lucas Stach
2018-07-04 16:35   ` Lorenzo Pieralisi
2018-05-29 19:39 ` Leonard Crestez [this message]
2018-06-08 14:33   ` [PATCH 2/2] PCI: imx: Initial imx7d pm support Lucas Stach
2018-07-02 17:18     ` Leonard Crestez
2018-07-03  8:42       ` Lucas Stach
2018-07-04 16:37         ` Lorenzo Pieralisi
2018-07-09 14:59         ` Leonard Crestez
2018-07-10 10:26           ` Ulf Hansson

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=a6176c8bcfbca08ce4e93e304bdcd48c4600f8e2.1527621510.git.leonard.crestez@nxp.com \
    --to=leonard.crestez@nxp.com \
    --cc=Anson.Huang@nxp.com \
    --cc=Joao.Pinto@synopsys.com \
    --cc=abel.vesa@nxp.com \
    --cc=andrew.smirnov@gmail.com \
    --cc=bhelgaas@google.com \
    --cc=hongxing.zhu@nxp.com \
    --cc=jingoohan1@gmail.com \
    --cc=l.stach@pengutronix.de \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pci@vger.kernel.org \
    --cc=linux-pm@vger.kernel.org \
    --cc=lorenzo.pieralisi@arm.com \
    --cc=p.zabel@pengutronix.de \
    --cc=rjw@rjwysocki.net \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).