From: John Garry <john.garry@huawei.com>
To: <jejb@linux.vnet.ibm.com>, <martin.petersen@oracle.com>
Cc: <linux-scsi@vger.kernel.org>, <linuxarm@huawei.com>,
<linux-kernel@vger.kernel.org>,
Xiaofei Tan <tanxiaofei@huawei.com>,
"John Garry" <john.garry@huawei.com>
Subject: [PATCH 4/9] scsi: hisi_sas: Adjust task reject period during host reset
Date: Thu, 31 May 2018 20:50:45 +0800 [thread overview]
Message-ID: <1527771050-200916-5-git-send-email-john.garry@huawei.com> (raw)
In-Reply-To: <1527771050-200916-1-git-send-email-john.garry@huawei.com>
From: Xiaofei Tan <tanxiaofei@huawei.com>
After soft_reset() for host reset, we should not be allowed to send
commands to the HW before the PHYs have come up and the port ids have been
refreshed.
Prior to this point, any commands cannot be successfully completed.
This exclusion is achieved by grabbing the host reset semaphore.
Signed-off-by: Xiaofei Tan <tanxiaofei@huawei.com>
Signed-off-by: John Garry <john.garry@huawei.com>
---
drivers/scsi/hisi_sas/hisi_sas_main.c | 21 ++++++++++++---------
drivers/scsi/hisi_sas/hisi_sas_v3_hw.c | 4 +++-
2 files changed, 15 insertions(+), 10 deletions(-)
diff --git a/drivers/scsi/hisi_sas/hisi_sas_main.c b/drivers/scsi/hisi_sas/hisi_sas_main.c
index 823386f..090d3e0 100644
--- a/drivers/scsi/hisi_sas/hisi_sas_main.c
+++ b/drivers/scsi/hisi_sas/hisi_sas_main.c
@@ -536,8 +536,13 @@ static int hisi_sas_task_exec(struct sas_task *task, gfp_t gfp_flags,
struct device *dev = hisi_hba->dev;
struct hisi_sas_dq *dq = NULL;
- if (unlikely(test_bit(HISI_SAS_REJECT_CMD_BIT, &hisi_hba->flags)))
- return -EINVAL;
+ if (unlikely(test_bit(HISI_SAS_REJECT_CMD_BIT, &hisi_hba->flags))) {
+ if (in_softirq())
+ return -EINVAL;
+
+ down(&hisi_hba->sem);
+ up(&hisi_hba->sem);
+ }
/* protect task_prep and start_delivery sequence */
rc = hisi_sas_task_prep(task, &dq, is_tmf, tmf, &pass);
@@ -1383,30 +1388,28 @@ static int hisi_sas_controller_reset(struct hisi_hba *hisi_hba)
clear_bit(HISI_SAS_REJECT_CMD_BIT, &hisi_hba->flags);
up(&hisi_hba->sem);
scsi_unblock_requests(shost);
- goto out;
+ clear_bit(HISI_SAS_RESET_BIT, &hisi_hba->flags);
+ return rc;
}
- clear_bit(HISI_SAS_REJECT_CMD_BIT, &hisi_hba->flags);
-
/* Init and wait for PHYs to come up and all libsas event finished. */
hisi_hba->hw->phys_init(hisi_hba);
msleep(1000);
hisi_sas_refresh_port_id(hisi_hba);
+ clear_bit(HISI_SAS_REJECT_CMD_BIT, &hisi_hba->flags);
up(&hisi_hba->sem);
if (hisi_hba->reject_stp_links_msk)
hisi_sas_terminate_stp_reject(hisi_hba);
hisi_sas_reset_init_all_devices(hisi_hba);
scsi_unblock_requests(shost);
+ clear_bit(HISI_SAS_RESET_BIT, &hisi_hba->flags);
state = hisi_hba->hw->get_phys_state(hisi_hba);
hisi_sas_rescan_topology(hisi_hba, old_state, state);
dev_info(dev, "controller reset complete\n");
-out:
- clear_bit(HISI_SAS_RESET_BIT, &hisi_hba->flags);
-
- return rc;
+ return 0;
}
static int hisi_sas_abort_task(struct sas_task *task)
diff --git a/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c b/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c
index 0a126a82..c40fdb8 100644
--- a/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c
+++ b/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c
@@ -2459,7 +2459,9 @@ static int hisi_sas_v3_suspend(struct pci_dev *pdev, pm_message_t state)
return -ENODEV;
}
- set_bit(HISI_SAS_RESET_BIT, &hisi_hba->flags);
+ if (test_and_set_bit(HISI_SAS_RESET_BIT, &hisi_hba->flags))
+ return -1;
+
scsi_block_requests(shost);
set_bit(HISI_SAS_REJECT_CMD_BIT, &hisi_hba->flags);
flush_workqueue(hisi_hba->wq);
--
1.9.1
next prev parent reply other threads:[~2018-05-31 12:54 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-05-31 12:50 [PATCH 0/9] hisi_sas: some misc changes John Garry
2018-05-31 12:50 ` [PATCH 1/9] scsi: hisi_sas: Use dmam_alloc_coherent() John Garry
2018-05-31 12:50 ` [PATCH 2/9] scsi: hisi_sas: Only process broadcast change in phy_bcast_v3_hw() John Garry
2018-05-31 12:50 ` [PATCH 3/9] scsi: hisi_sas: Fix the conflict between dev gone and host reset John Garry
2018-05-31 12:50 ` John Garry [this message]
2018-05-31 12:50 ` [PATCH 5/9] scsi: hisi_sas: Add a flag to filter PHY events during reset John Garry
2018-05-31 12:50 ` [PATCH 6/9] scsi: hisi_sas: Release all remaining resources in clear nexus ha John Garry
2018-05-31 12:50 ` [PATCH 7/9] scsi: hisi_sas: Pre-allocate slot DMA buffers John Garry
2018-05-31 12:50 ` [PATCH 8/9] scsi: hisi_sas: Add missing PHY spinlock init John Garry
2018-05-31 12:50 ` [PATCH 9/9] scsi: hisi_sas: Update a couple of register settings for v3 hw John Garry
2018-06-08 1:42 ` [PATCH 0/9] hisi_sas: some misc changes Martin K. Petersen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1527771050-200916-5-git-send-email-john.garry@huawei.com \
--to=john.garry@huawei.com \
--cc=jejb@linux.vnet.ibm.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-scsi@vger.kernel.org \
--cc=linuxarm@huawei.com \
--cc=martin.petersen@oracle.com \
--cc=tanxiaofei@huawei.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).