From: Jun Yao <yaojun8558363@gmail.com>
To: linux-arm-kernel@lists.infradead.org
Cc: catalin.marinas@arm.com, will.deacon@arm.com,
james.morse@arm.com, robin.murphy@arm.com, labbott@redhat.com,
linux-kernel@vger.kernel.org,
kernel-hardening@lists.openwall.com
Subject: [PATCH v3 1/3] arm64/mm: pass swapper_pg_dir as an argument to __enable_mmu()
Date: Wed, 6 Jun 2018 12:39:19 +0800 [thread overview]
Message-ID: <20180606043921.19851-2-yaojun8558363@gmail.com> (raw)
In-Reply-To: <20180606043921.19851-1-yaojun8558363@gmail.com>
Introduce __pa_swapper_pg_dir to save physical address of
swapper_pg_dir. And pass it as an argument to __enable_mmu().
Signed-off-by: Jun Yao <yaojun8558363@gmail.com>
---
arch/arm64/include/asm/mmu_context.h | 4 +---
arch/arm64/include/asm/pgtable.h | 1 +
arch/arm64/kernel/cpufeature.c | 2 +-
arch/arm64/kernel/head.S | 6 ++++--
arch/arm64/kernel/hibernate.c | 2 +-
arch/arm64/kernel/sleep.S | 1 +
arch/arm64/mm/kasan_init.c | 4 ++--
arch/arm64/mm/mmu.c | 20 ++++++++++++++++++--
8 files changed, 29 insertions(+), 11 deletions(-)
diff --git a/arch/arm64/include/asm/mmu_context.h b/arch/arm64/include/asm/mmu_context.h
index 39ec0b8a689e..3eddb871f251 100644
--- a/arch/arm64/include/asm/mmu_context.h
+++ b/arch/arm64/include/asm/mmu_context.h
@@ -141,14 +141,12 @@ static inline void cpu_install_idmap(void)
* Atomically replaces the active TTBR1_EL1 PGD with a new VA-compatible PGD,
* avoiding the possibility of conflicting TLB entries being allocated.
*/
-static inline void cpu_replace_ttbr1(pgd_t *pgdp)
+static inline void cpu_replace_ttbr1(phys_addr_t pgd_phys)
{
typedef void (ttbr_replace_func)(phys_addr_t);
extern ttbr_replace_func idmap_cpu_replace_ttbr1;
ttbr_replace_func *replace_phys;
- phys_addr_t pgd_phys = virt_to_phys(pgdp);
-
replace_phys = (void *)__pa_symbol(idmap_cpu_replace_ttbr1);
cpu_install_idmap();
diff --git a/arch/arm64/include/asm/pgtable.h b/arch/arm64/include/asm/pgtable.h
index 7c4c8f318ba9..519ab5581b08 100644
--- a/arch/arm64/include/asm/pgtable.h
+++ b/arch/arm64/include/asm/pgtable.h
@@ -722,6 +722,7 @@ extern pgd_t swapper_pg_dir[PTRS_PER_PGD];
extern pgd_t swapper_pg_end[];
extern pgd_t idmap_pg_dir[PTRS_PER_PGD];
extern pgd_t tramp_pg_dir[PTRS_PER_PGD];
+extern volatile phys_addr_t __pa_swapper_pg_dir;
/*
* Encode and decode a swap entry:
diff --git a/arch/arm64/kernel/cpufeature.c b/arch/arm64/kernel/cpufeature.c
index d2856b129097..e3d76a9dd67a 100644
--- a/arch/arm64/kernel/cpufeature.c
+++ b/arch/arm64/kernel/cpufeature.c
@@ -917,7 +917,7 @@ kpti_install_ng_mappings(const struct arm64_cpu_capabilities *__unused)
remap_fn = (void *)__pa_symbol(idmap_kpti_install_ng_mappings);
cpu_install_idmap();
- remap_fn(cpu, num_online_cpus(), __pa_symbol(swapper_pg_dir));
+ remap_fn(cpu, num_online_cpus(), __pa_swapper_pg_dir);
cpu_uninstall_idmap();
if (!cpu)
diff --git a/arch/arm64/kernel/head.S b/arch/arm64/kernel/head.S
index b0853069702f..2e871b1cb75f 100644
--- a/arch/arm64/kernel/head.S
+++ b/arch/arm64/kernel/head.S
@@ -706,6 +706,7 @@ secondary_startup:
* Common entry point for secondary CPUs.
*/
bl __cpu_setup // initialise processor
+ ldr_l x26, __pa_swapper_pg_dir
bl __enable_mmu
ldr x8, =__secondary_switched
br x8
@@ -748,6 +749,7 @@ ENDPROC(__secondary_switched)
* Enable the MMU.
*
* x0 = SCTLR_EL1 value for turning on the MMU.
+ * x26 = TTBR1 value for turning on the MMU.
*
* Returns to the caller via x30/lr. This requires the caller to be covered
* by the .idmap.text section.
@@ -762,9 +764,8 @@ ENTRY(__enable_mmu)
b.ne __no_granule_support
update_early_cpu_boot_status 0, x1, x2
adrp x1, idmap_pg_dir
- adrp x2, swapper_pg_dir
phys_to_ttbr x3, x1
- phys_to_ttbr x4, x2
+ phys_to_ttbr x4, x26
msr ttbr0_el1, x3 // load TTBR0
msr ttbr1_el1, x4 // load TTBR1
isb
@@ -823,6 +824,7 @@ __primary_switch:
mrs x20, sctlr_el1 // preserve old SCTLR_EL1 value
#endif
+ adrp x26, swapper_pg_dir
bl __enable_mmu
#ifdef CONFIG_RELOCATABLE
bl __relocate_kernel
diff --git a/arch/arm64/kernel/hibernate.c b/arch/arm64/kernel/hibernate.c
index 6b2686d54411..0a0a0ca19f9b 100644
--- a/arch/arm64/kernel/hibernate.c
+++ b/arch/arm64/kernel/hibernate.c
@@ -125,7 +125,7 @@ int arch_hibernation_header_save(void *addr, unsigned int max_size)
return -EOVERFLOW;
arch_hdr_invariants(&hdr->invariants);
- hdr->ttbr1_el1 = __pa_symbol(swapper_pg_dir);
+ hdr->ttbr1_el1 = __pa_swapper_pg_dir;
hdr->reenter_kernel = _cpu_resume;
/* We can't use __hyp_get_vectors() because kvm may still be loaded */
diff --git a/arch/arm64/kernel/sleep.S b/arch/arm64/kernel/sleep.S
index bebec8ef9372..03854c329449 100644
--- a/arch/arm64/kernel/sleep.S
+++ b/arch/arm64/kernel/sleep.S
@@ -101,6 +101,7 @@ ENTRY(cpu_resume)
bl el2_setup // if in EL2 drop to EL1 cleanly
bl __cpu_setup
/* enable the MMU early - so we can access sleep_save_stash by va */
+ ldr_l x26, __pa_swapper_pg_dir
bl __enable_mmu
ldr x8, =_cpu_resume
br x8
diff --git a/arch/arm64/mm/kasan_init.c b/arch/arm64/mm/kasan_init.c
index 12145874c02b..dd4f28c19165 100644
--- a/arch/arm64/mm/kasan_init.c
+++ b/arch/arm64/mm/kasan_init.c
@@ -199,7 +199,7 @@ void __init kasan_init(void)
*/
memcpy(tmp_pg_dir, swapper_pg_dir, sizeof(tmp_pg_dir));
dsb(ishst);
- cpu_replace_ttbr1(lm_alias(tmp_pg_dir));
+ cpu_replace_ttbr1(__pa_symbol(tmp_pg_dir));
clear_pgds(KASAN_SHADOW_START, KASAN_SHADOW_END);
@@ -236,7 +236,7 @@ void __init kasan_init(void)
pfn_pte(sym_to_pfn(kasan_zero_page), PAGE_KERNEL_RO));
memset(kasan_zero_page, 0, PAGE_SIZE);
- cpu_replace_ttbr1(lm_alias(swapper_pg_dir));
+ cpu_replace_ttbr1(__pa_swapper_pg_dir);
/* At this point kasan is fully initialized. Enable error messages */
init_task.kasan_depth = 0;
diff --git a/arch/arm64/mm/mmu.c b/arch/arm64/mm/mmu.c
index 2dbb2c9f1ec1..d518e27792ef 100644
--- a/arch/arm64/mm/mmu.c
+++ b/arch/arm64/mm/mmu.c
@@ -55,6 +55,13 @@ u64 idmap_ptrs_per_pgd = PTRS_PER_PGD;
u64 kimage_voffset __ro_after_init;
EXPORT_SYMBOL(kimage_voffset);
+/*
+ * Ensure that hibernate will re-clean this value to the PoC once
+ * it has restored the memory.
+ */
+volatile phys_addr_t __section(".mmuoff.data.read")
+__pa_swapper_pg_dir;
+
/*
* Empty_zero_page is a special page that is used for zero-initialized data
* and COW.
@@ -631,6 +638,15 @@ void __init paging_init(void)
phys_addr_t pgd_phys = early_pgtable_alloc();
pgd_t *pgdp = pgd_set_fixmap(pgd_phys);
+ __pa_swapper_pg_dir = __pa_symbol(swapper_pg_dir);
+
+ /*
+ * We need to clean '__pa_swapper_pg_dir' to the PoC, so that
+ * secondaries will read the new value.
+ */
+ __flush_dcache_area((void *)&__pa_swapper_pg_dir,
+ sizeof(__pa_swapper_pg_dir));
+
map_kernel(pgdp);
map_mem(pgdp);
@@ -642,9 +658,9 @@ void __init paging_init(void)
*
* To do this we need to go via a temporary pgd.
*/
- cpu_replace_ttbr1(__va(pgd_phys));
+ cpu_replace_ttbr1(pgd_phys);
memcpy(swapper_pg_dir, pgdp, PGD_SIZE);
- cpu_replace_ttbr1(lm_alias(swapper_pg_dir));
+ cpu_replace_ttbr1(__pa_swapper_pg_dir);
pgd_clear_fixmap();
memblock_free(pgd_phys, PAGE_SIZE);
--
2.17.0
next prev parent reply other threads:[~2018-06-06 4:39 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-06-06 4:39 [PATCH v3 0/3] arm64/mm: migrate swapper_pg_dir Jun Yao
2018-06-06 4:39 ` Jun Yao [this message]
2018-06-06 4:39 ` [PATCH v3 2/3] arm64/mm: introduce variable to save new swapper_pg_dir address Jun Yao
2018-06-06 4:39 ` [PATCH v3 3/3] arm64/mm: migrate swapper_pg_dir and tramp_pg_dir Jun Yao
2018-06-13 9:17 ` James Morse
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180606043921.19851-2-yaojun8558363@gmail.com \
--to=yaojun8558363@gmail.com \
--cc=catalin.marinas@arm.com \
--cc=james.morse@arm.com \
--cc=kernel-hardening@lists.openwall.com \
--cc=labbott@redhat.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=robin.murphy@arm.com \
--cc=will.deacon@arm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).