[v5,4/4] of: improve reporting invalid overlay target path
diff mbox series

Message ID 1519955520-29975-5-git-send-email-frowand.list@gmail.com
State New, archived
Headers show
  • of: change overlay apply input data from unflattened
Related show

Commit Message

Frank Rowand March 2, 2018, 1:52 a.m. UTC
From: Frank Rowand <frank.rowand@sony.com>

Errors while developing the patch to create of_overlay_fdt_apply()
exposed inadequate error messages to debug problems when overlay
devicetree fragment nodes contain an invalid target path.  Improve
the messages in find_target_node() to remedy this.

Signed-off-by: Frank Rowand <frank.rowand@sony.com>

changes from v2:
  - add fragment node name as suggested by Geert
  - existing error message printed short node name, thus not
    discriminating between fragments; change to full node name
  - existing error message printed node address, which is devicetree
    internal debugging, not useful in an overlay apply error message;
    remove node address from message

 drivers/of/overlay.c | 22 ++++++++++++++++------
 1 file changed, 16 insertions(+), 6 deletions(-)

diff mbox series

diff --git a/drivers/of/overlay.c b/drivers/of/overlay.c
index e3d7f69a8333..b930e05d1215 100644
--- a/drivers/of/overlay.c
+++ b/drivers/of/overlay.c
@@ -488,20 +488,30 @@  static int build_changeset(struct overlay_changeset *ovcs)
 static struct device_node *find_target_node(struct device_node *info_node)
+	struct device_node *node;
 	const char *path;
 	u32 val;
 	int ret;
 	ret = of_property_read_u32(info_node, "target", &val);
-	if (!ret)
-		return of_find_node_by_phandle(val);
+	if (!ret) {
+		node = of_find_node_by_phandle(val);
+		if (!node)
+			pr_err("find target, node: %pOF, phandle 0x%x not found\n",
+			       info_node, val);
+		return node;
+	}
 	ret = of_property_read_string(info_node, "target-path", &path);
-	if (!ret)
-		return of_find_node_by_path(path);
+	if (!ret) {
+		node =  of_find_node_by_path(path);
+		if (!node)
+			pr_err("find target, node: %pOF, path '%s' not found\n",
+			       info_node, path);
+		return node;
+	}
-	pr_err("Failed to find target for node %p (%s)\n",
-		info_node, info_node->name);
+	pr_err("find target, node: %pOF, no target property\n", info_node);
 	return NULL;