From: Icenowy Zheng <icenowy@aosc.io>
To: Rob Herring <robh+dt@kernel.org>,
Maxime Ripard <maxime.ripard@bootlin.com>,
Chen-Yu Tsai <wens@csie.org>
Cc: devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org, linux-clk@vger.kernel.org,
linux-sunxi@googlegroups.com, Icenowy Zheng <icenowy@aosc.io>
Subject: [PATCH 7/7] arm64: allwinner: a64: add HDMI regulator to all DTs' simplefb_hdmi
Date: Sat, 17 Mar 2018 01:53:54 +0800 [thread overview]
Message-ID: <20180316175354.21437-8-icenowy@aosc.io> (raw)
In-Reply-To: <20180316175354.21437-1-icenowy@aosc.io>
On usual A64 board design the power of HDMI controller is connected to
DLDO1 of the AXP803 PMIC. If this regulator is shut down, the HDMI
output will be blank. Therefore the simplefb driver should keep this
regulator on.
Add the regulator to all currently available A64 boards' simplefb_hdmi
device node.
Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
---
arch/arm64/boot/dts/allwinner/sun50i-a64-bananapi-m64.dts | 4 ++++
arch/arm64/boot/dts/allwinner/sun50i-a64-nanopi-a64.dts | 4 ++++
arch/arm64/boot/dts/allwinner/sun50i-a64-olinuxino.dts | 4 ++++
arch/arm64/boot/dts/allwinner/sun50i-a64-orangepi-win.dts | 4 ++++
arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts | 4 ++++
arch/arm64/boot/dts/allwinner/sun50i-a64-sopine-baseboard.dts | 4 ++++
6 files changed, 24 insertions(+)
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-bananapi-m64.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-bananapi-m64.dts
index 2250dec9974c..2fd343512d41 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-a64-bananapi-m64.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-bananapi-m64.dts
@@ -282,6 +282,10 @@
regulator-name = "vcc-rtc";
};
+&simplefb_hdmi {
+ vcc-hdmi-supply = <®_dldo1>;
+};
+
&uart0 {
pinctrl-names = "default";
pinctrl-0 = <&uart0_pins_a>;
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-nanopi-a64.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-nanopi-a64.dts
index e2dce48fa29a..98dbff19f5cc 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-a64-nanopi-a64.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-nanopi-a64.dts
@@ -195,6 +195,10 @@
regulator-name = "vcc-rtc";
};
+&simplefb_hdmi {
+ vcc-hdmi-supply = <®_dldo1>;
+};
+
&uart0 {
pinctrl-names = "default";
pinctrl-0 = <&uart0_pins_a>;
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-olinuxino.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-olinuxino.dts
index 3b3081b10ecb..3f531393eaee 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-a64-olinuxino.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-olinuxino.dts
@@ -214,6 +214,10 @@
regulator-name = "vcc-rtc";
};
+&simplefb_hdmi {
+ vcc-hdmi-supply = <®_dldo1>;
+};
+
&uart0 {
pinctrl-names = "default";
pinctrl-0 = <&uart0_pins_a>;
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-orangepi-win.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-orangepi-win.dts
index bf42690a3361..1221764f5719 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-a64-orangepi-win.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-orangepi-win.dts
@@ -191,6 +191,10 @@
regulator-name = "vcc-rtc";
};
+&simplefb_hdmi {
+ vcc-hdmi-supply = <®_dldo1>;
+};
+
&uart0 {
pinctrl-names = "default";
pinctrl-0 = <&uart0_pins_a>;
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts
index a75825798a71..1b9b92e541d2 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts
@@ -229,6 +229,10 @@
regulator-name = "vcc-rtc";
};
+&simplefb_hdmi {
+ vcc-hdmi-supply = <®_dldo1>;
+};
+
/* On Euler connector */
&spdif {
status = "disabled";
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine-baseboard.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine-baseboard.dts
index abe179de35d7..c21f2331add6 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine-baseboard.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine-baseboard.dts
@@ -134,6 +134,10 @@
regulator-name = "vcc-wifi";
};
+&simplefb_hdmi {
+ vcc-hdmi-supply = <®_dldo1>;
+};
+
&uart0 {
pinctrl-names = "default";
pinctrl-0 = <&uart0_pins_a>;
--
2.15.1
prev parent reply other threads:[~2018-03-16 17:56 UTC|newest]
Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-03-16 17:53 [PATCH 0/7] Allwinner A64 DE2 CCU support with dedicated DE2 bus driver Icenowy Zheng
2018-03-16 17:53 ` [PATCH 1/7] dt-bindings: add compatible string for the A64 DE2 CCU Icenowy Zheng
2018-03-19 22:00 ` Stephen Boyd
2018-03-26 22:22 ` Rob Herring
2018-03-16 17:53 ` [PATCH 2/7] dt-bindings: add binding for the Allwinner A64 DE2 bus Icenowy Zheng
2018-03-20 18:46 ` Maxime Ripard
2018-03-21 2:18 ` Icenowy Zheng
2018-03-21 17:13 ` [linux-sunxi] " Jernej Škrabec
2018-03-22 6:08 ` Icenowy Zheng
2018-03-26 22:22 ` Rob Herring
2018-03-26 23:31 ` Icenowy Zheng
2018-03-27 8:11 ` Maxime Ripard
2018-03-16 17:53 ` [PATCH 3/7] bus: add bus driver for accessing Allwinner A64 DE2 Icenowy Zheng
2018-04-14 10:25 ` Jagan Teki
2018-04-14 10:30 ` Chen-Yu Tsai
2018-04-14 10:46 ` Jagan Teki
2018-04-19 6:35 ` Jagan Teki
2018-03-16 17:53 ` [PATCH 4/7] clk: sunxi-ng: add A64 compatible string Icenowy Zheng
2018-03-16 17:53 ` [PATCH 5/7] arm64: allwinner: a64: add DE2 CCU related device tree nodes Icenowy Zheng
2018-03-20 18:47 ` Maxime Ripard
2018-03-16 17:53 ` [PATCH 6/7] arm64: allwinner: a64: add simplefb for A64 SoC Icenowy Zheng
2018-03-16 17:53 ` Icenowy Zheng [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180316175354.21437-8-icenowy@aosc.io \
--to=icenowy@aosc.io \
--cc=devicetree@vger.kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-clk@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-sunxi@googlegroups.com \
--cc=maxime.ripard@bootlin.com \
--cc=robh+dt@kernel.org \
--cc=wens@csie.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).