From: Florian Fainelli <f.fainelli@gmail.com>
To: netdev@vger.kernel.org
Cc: Russell King <rmk+kernel@armlinux.org.uk>,
Florian Fainelli <f.fainelli@gmail.com>,
Thomas Petazzoni <thomas.petazzoni@free-electrons.com>,
Andrew Lunn <andrew@lunn.ch>,
"David S. Miller" <davem@davemloft.net>,
linux-kernel@vger.kernel.org (open list),
Antoine Tenart <antoine.tenart@bootlin.com>,
Yan Markman <ymarkman@marvell.com>,
Stefan Chulski <stefanc@marvell.com>,
Maxime Chevallier <maxime.chevallier@bootlin.com>,
Miquel Raynal <miquel.raynal@free-electrons.com>,
Marcin Wojtas <mw@semihalf.com>
Subject: [PATCH net-next v2 2/2] sfp/phylink: move module EEPROM ethtool access into netdev core ethtool
Date: Wed, 28 Mar 2018 15:44:16 -0700 [thread overview]
Message-ID: <20180328224416.6981-3-f.fainelli@gmail.com> (raw)
In-Reply-To: <20180328224416.6981-1-f.fainelli@gmail.com>
From: Russell King <rmk+kernel@armlinux.org.uk>
Provide a pointer to the SFP bus in struct net_device, so that the
ethtool module EEPROM methods can access the SFP directly, rather
than needing every user to provide a hook for it.
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
---
drivers/net/ethernet/marvell/mvneta.c | 18 ------------------
drivers/net/phy/phylink.c | 28 ----------------------------
drivers/net/phy/sfp-bus.c | 6 ++----
include/linux/netdevice.h | 3 +++
include/linux/phylink.h | 3 ---
net/core/ethtool.c | 7 +++++++
6 files changed, 12 insertions(+), 53 deletions(-)
diff --git a/drivers/net/ethernet/marvell/mvneta.c b/drivers/net/ethernet/marvell/mvneta.c
index cd09bde55596..25ced96750bf 100644
--- a/drivers/net/ethernet/marvell/mvneta.c
+++ b/drivers/net/ethernet/marvell/mvneta.c
@@ -4075,22 +4075,6 @@ static int mvneta_ethtool_set_wol(struct net_device *dev,
return ret;
}
-static int mvneta_ethtool_get_module_info(struct net_device *dev,
- struct ethtool_modinfo *modinfo)
-{
- struct mvneta_port *pp = netdev_priv(dev);
-
- return phylink_ethtool_get_module_info(pp->phylink, modinfo);
-}
-
-static int mvneta_ethtool_get_module_eeprom(struct net_device *dev,
- struct ethtool_eeprom *ee, u8 *buf)
-{
- struct mvneta_port *pp = netdev_priv(dev);
-
- return phylink_ethtool_get_module_eeprom(pp->phylink, ee, buf);
-}
-
static int mvneta_ethtool_get_eee(struct net_device *dev,
struct ethtool_eee *eee)
{
@@ -4165,8 +4149,6 @@ static const struct ethtool_ops mvneta_eth_tool_ops = {
.set_link_ksettings = mvneta_ethtool_set_link_ksettings,
.get_wol = mvneta_ethtool_get_wol,
.set_wol = mvneta_ethtool_set_wol,
- .get_module_info = mvneta_ethtool_get_module_info,
- .get_module_eeprom = mvneta_ethtool_get_module_eeprom,
.get_eee = mvneta_ethtool_get_eee,
.set_eee = mvneta_ethtool_set_eee,
};
diff --git a/drivers/net/phy/phylink.c b/drivers/net/phy/phylink.c
index 9b1e4721ea3a..c582b2d7546c 100644
--- a/drivers/net/phy/phylink.c
+++ b/drivers/net/phy/phylink.c
@@ -1250,34 +1250,6 @@ int phylink_ethtool_set_pauseparam(struct phylink *pl,
}
EXPORT_SYMBOL_GPL(phylink_ethtool_set_pauseparam);
-int phylink_ethtool_get_module_info(struct phylink *pl,
- struct ethtool_modinfo *modinfo)
-{
- int ret = -EOPNOTSUPP;
-
- WARN_ON(!lockdep_rtnl_is_held());
-
- if (pl->sfp_bus)
- ret = sfp_get_module_info(pl->sfp_bus, modinfo);
-
- return ret;
-}
-EXPORT_SYMBOL_GPL(phylink_ethtool_get_module_info);
-
-int phylink_ethtool_get_module_eeprom(struct phylink *pl,
- struct ethtool_eeprom *ee, u8 *buf)
-{
- int ret = -EOPNOTSUPP;
-
- WARN_ON(!lockdep_rtnl_is_held());
-
- if (pl->sfp_bus)
- ret = sfp_get_module_eeprom(pl->sfp_bus, ee, buf);
-
- return ret;
-}
-EXPORT_SYMBOL_GPL(phylink_ethtool_get_module_eeprom);
-
/**
* phylink_ethtool_get_eee_err() - read the energy efficient ethernet error
* counter
diff --git a/drivers/net/phy/sfp-bus.c b/drivers/net/phy/sfp-bus.c
index 3d4ff5d0d2a6..0381da78d228 100644
--- a/drivers/net/phy/sfp-bus.c
+++ b/drivers/net/phy/sfp-bus.c
@@ -342,6 +342,7 @@ static int sfp_register_bus(struct sfp_bus *bus)
}
if (bus->started)
bus->socket_ops->start(bus->sfp);
+ bus->netdev->sfp_bus = bus;
bus->registered = true;
return 0;
}
@@ -356,6 +357,7 @@ static void sfp_unregister_bus(struct sfp_bus *bus)
if (bus->phydev && ops && ops->disconnect_phy)
ops->disconnect_phy(bus->upstream);
}
+ bus->netdev->sfp_bus = NULL;
bus->registered = false;
}
@@ -371,8 +373,6 @@ static void sfp_unregister_bus(struct sfp_bus *bus)
*/
int sfp_get_module_info(struct sfp_bus *bus, struct ethtool_modinfo *modinfo)
{
- if (!bus->registered)
- return -ENOIOCTLCMD;
return bus->socket_ops->module_info(bus->sfp, modinfo);
}
EXPORT_SYMBOL_GPL(sfp_get_module_info);
@@ -391,8 +391,6 @@ EXPORT_SYMBOL_GPL(sfp_get_module_info);
int sfp_get_module_eeprom(struct sfp_bus *bus, struct ethtool_eeprom *ee,
u8 *data)
{
- if (!bus->registered)
- return -ENOIOCTLCMD;
return bus->socket_ops->module_eeprom(bus->sfp, ee, data);
}
EXPORT_SYMBOL_GPL(sfp_get_module_eeprom);
diff --git a/include/linux/netdevice.h b/include/linux/netdevice.h
index 2a2d9cf50aa2..53f0cd64676b 100644
--- a/include/linux/netdevice.h
+++ b/include/linux/netdevice.h
@@ -58,6 +58,7 @@ struct device;
struct phy_device;
struct dsa_port;
+struct sfp_bus;
/* 802.11 specific */
struct wireless_dev;
/* 802.15.4 specific */
@@ -1662,6 +1663,7 @@ enum netdev_priv_flags {
* @priomap: XXX: need comments on this one
* @phydev: Physical device may attach itself
* for hardware timestamping
+ * @sfp_bus: attached &struct sfp_bus structure.
*
* @qdisc_tx_busylock: lockdep class annotating Qdisc->busylock spinlock
* @qdisc_running_key: lockdep class annotating Qdisc->running seqcount
@@ -1945,6 +1947,7 @@ struct net_device {
struct netprio_map __rcu *priomap;
#endif
struct phy_device *phydev;
+ struct sfp_bus *sfp_bus;
struct lock_class_key *qdisc_tx_busylock;
struct lock_class_key *qdisc_running_key;
bool proto_down;
diff --git a/include/linux/phylink.h b/include/linux/phylink.h
index e95cc12030fa..50eeae025f1e 100644
--- a/include/linux/phylink.h
+++ b/include/linux/phylink.h
@@ -219,9 +219,6 @@ void phylink_ethtool_get_pauseparam(struct phylink *,
struct ethtool_pauseparam *);
int phylink_ethtool_set_pauseparam(struct phylink *,
struct ethtool_pauseparam *);
-int phylink_ethtool_get_module_info(struct phylink *, struct ethtool_modinfo *);
-int phylink_ethtool_get_module_eeprom(struct phylink *,
- struct ethtool_eeprom *, u8 *);
int phylink_get_eee_err(struct phylink *);
int phylink_ethtool_get_eee(struct phylink *, struct ethtool_eee *);
int phylink_ethtool_set_eee(struct phylink *, struct ethtool_eee *);
diff --git a/net/core/ethtool.c b/net/core/ethtool.c
index bb6e498c6e3d..eb55252ca1fb 100644
--- a/net/core/ethtool.c
+++ b/net/core/ethtool.c
@@ -22,6 +22,7 @@
#include <linux/bitops.h>
#include <linux/uaccess.h>
#include <linux/vmalloc.h>
+#include <linux/sfp.h>
#include <linux/slab.h>
#include <linux/rtnetlink.h>
#include <linux/sched/signal.h>
@@ -2245,6 +2246,9 @@ static int __ethtool_get_module_info(struct net_device *dev,
const struct ethtool_ops *ops = dev->ethtool_ops;
struct phy_device *phydev = dev->phydev;
+ if (dev->sfp_bus)
+ return sfp_get_module_info(dev->sfp_bus, modinfo);
+
if (phydev && phydev->drv && phydev->drv->module_info)
return phydev->drv->module_info(phydev, modinfo);
@@ -2279,6 +2283,9 @@ static int __ethtool_get_module_eeprom(struct net_device *dev,
const struct ethtool_ops *ops = dev->ethtool_ops;
struct phy_device *phydev = dev->phydev;
+ if (dev->sfp_bus)
+ return sfp_get_module_eeprom(dev->sfp_bus, ee, data);
+
if (phydev && phydev->drv && phydev->drv->module_eeprom)
return phydev->drv->module_eeprom(phydev, ee, data);
--
2.14.1
next prev parent reply other threads:[~2018-03-28 22:44 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-03-28 22:44 [PATCH net-next v2 0/2] phylink: API changes Florian Fainelli
2018-03-28 22:44 ` [PATCH net-next v2 1/2] net: phy: phylink: Provide PHY interface to mac_link_{up,down} Florian Fainelli
2018-03-29 5:59 ` [EXT] " Yan Markman
2018-03-29 12:57 ` Andrew Lunn
2018-03-28 22:44 ` Florian Fainelli [this message]
2018-03-29 5:59 ` [EXT] [PATCH net-next v2 2/2] sfp/phylink: move module EEPROM ethtool access into netdev core ethtool Yan Markman
2018-03-29 5:58 ` [EXT] [PATCH net-next v2 0/2] phylink: API changes Yan Markman
2018-03-29 7:44 ` Russell King - ARM Linux
2018-03-30 14:11 ` David Miller
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180328224416.6981-3-f.fainelli@gmail.com \
--to=f.fainelli@gmail.com \
--cc=andrew@lunn.ch \
--cc=antoine.tenart@bootlin.com \
--cc=davem@davemloft.net \
--cc=linux-kernel@vger.kernel.org \
--cc=maxime.chevallier@bootlin.com \
--cc=miquel.raynal@free-electrons.com \
--cc=mw@semihalf.com \
--cc=netdev@vger.kernel.org \
--cc=rmk+kernel@armlinux.org.uk \
--cc=stefanc@marvell.com \
--cc=thomas.petazzoni@free-electrons.com \
--cc=ymarkman@marvell.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).