From: "Paweł Chmiel" <pawel.mikolaj.chmiel@gmail.com>
To: kgene@kernel.org, krzk@kernel.org, robh+dt@kernel.org,
mark.rutland@arm.com, linux@armlinux.org.uk
Cc: linux-arm-kernel@lists.infradead.org,
linux-samsung-soc@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org, xc-racer2@live.ca,
pawel.mikolaj.chmiel@gmail.com
Subject: [PATCH 6/7] ARM: dts: s5pv210: Add initial DTS config for SGH-T959P phone
Date: Thu, 21 Jun 2018 21:09:58 +0200 [thread overview]
Message-ID: <1529608199-5583-7-git-send-email-pawel.mikolaj.chmiel@gmail.com> (raw)
In-Reply-To: <1529608199-5583-1-git-send-email-pawel.mikolaj.chmiel@gmail.com>
From: Jonathan Bakker <xc-racer2@live.ca>
Signed-off-by: Jonathan Bakker <xc-racer2@live.ca>
Signed-off-by: Paweł Chmiel <pawel.mikolaj.chmiel@gmail.com>
---
arch/arm/boot/dts/Makefile | 1 +
arch/arm/boot/dts/s5pv210-fascinate4g.dts | 40 +++++++++++++++++++++++++++++++
2 files changed, 41 insertions(+)
create mode 100644 arch/arm/boot/dts/s5pv210-fascinate4g.dts
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 522ebdca1d3d..d00e995875bb 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -846,6 +846,7 @@ dtb-$(CONFIG_ARCH_S3C64XX) += \
s3c6410-smdk6410.dtb
dtb-$(CONFIG_ARCH_S5PV210) += \
s5pv210-aquila.dtb \
+ s5pv210-fascinate4g.dtb \
s5pv210-galaxys.dtb \
s5pv210-goni.dtb \
s5pv210-smdkc110.dtb \
diff --git a/arch/arm/boot/dts/s5pv210-fascinate4g.dts b/arch/arm/boot/dts/s5pv210-fascinate4g.dts
new file mode 100644
index 000000000000..37967f57c7b7
--- /dev/null
+++ b/arch/arm/boot/dts/s5pv210-fascinate4g.dts
@@ -0,0 +1,40 @@
+// SPDX-License-Identifier: GPL-2.0
+
+/dts-v1/;
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include "s5pv210-aries.dtsi"
+
+/ {
+ model = "Samsung Galaxy S Fascinate 4G (SGH-T959P) based on S5PV210";
+ compatible = "samsung,fascinate4g", "samsung,aries", "samsung,s5pv210";
+
+ chosen {
+ bootargs = "console=ttySAC2,115200n8 root=/dev/mmcblk1p1 rw rootwait ignore_loglevel earlyprintk";
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+
+ power {
+ label = "power";
+ gpios = <&gph2 6 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_POWER>;
+ wakeup-source;
+ };
+
+ vol-down {
+ label = "volume_down";
+ gpios = <&gph3 2 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_VOLUMEDOWN>;
+ };
+
+ vol-up {
+ label = "volume_up";
+ gpios = <&gph3 1 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_VOLUMEUP>;
+ };
+ };
+};
--
2.7.4
next prev parent reply other threads:[~2018-06-21 19:11 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-06-21 19:09 [PATCH 0/7] Initial support for Samsung Galaxy S and Galaxy S 4G Paweł Chmiel
2018-06-21 19:09 ` [PATCH 1/7] ARM: dts: s5pv210: Add missing interrupt-controller property to gph2 Paweł Chmiel
2018-06-21 19:09 ` [PATCH 2/7] ARM: dts: s5pv210: Add initial DTS for Samsung Aries based phones Paweł Chmiel
2018-06-22 7:41 ` Krzysztof Kozlowski
2018-06-22 10:15 ` Paweł Chmiel
2018-06-21 19:09 ` [PATCH 3/7] ARM: dts: s5pv210: Add initial DTS for Samsung Galaxy S phone Paweł Chmiel
2018-06-22 7:49 ` Krzysztof Kozlowski
2018-06-22 8:42 ` Paweł Chmiel
2018-06-22 8:51 ` Krzysztof Kozlowski
2018-06-21 19:09 ` [PATCH 4/7] ARM: s5pv210_defconfig: Enable drivers for Samsung Aries based phones Paweł Chmiel
2018-06-22 7:54 ` Krzysztof Kozlowski
2018-06-21 19:09 ` [PATCH 5/7] dt-bindings: samsung: Document bindings for Samsung aries boards Paweł Chmiel
2018-06-22 7:56 ` Krzysztof Kozlowski
2018-06-22 7:57 ` Krzysztof Kozlowski
2018-06-27 17:21 ` Rob Herring
2018-06-21 19:09 ` Paweł Chmiel [this message]
2018-06-22 7:58 ` [PATCH 6/7] ARM: dts: s5pv210: Add initial DTS config for SGH-T959P phone Krzysztof Kozlowski
2018-06-21 19:09 ` [PATCH 7/7] dt-bindings: samsung: Document binding for SGH-T959P board Paweł Chmiel
2018-06-22 7:59 ` Krzysztof Kozlowski
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1529608199-5583-7-git-send-email-pawel.mikolaj.chmiel@gmail.com \
--to=pawel.mikolaj.chmiel@gmail.com \
--cc=devicetree@vger.kernel.org \
--cc=kgene@kernel.org \
--cc=krzk@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-samsung-soc@vger.kernel.org \
--cc=linux@armlinux.org.uk \
--cc=mark.rutland@arm.com \
--cc=robh+dt@kernel.org \
--cc=xc-racer2@live.ca \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).