iio: mma8452: Fix ignoring MMA8452_INT_DRDY
diff mbox series

Message ID d3cdb3fef8434663c95b7b2f799c5ee4446a5231.1528397238.git.leonard.crestez@nxp.com
State Accepted
Headers show
Series
  • iio: mma8452: Fix ignoring MMA8452_INT_DRDY
Related show

Commit Message

Leonard Crestez June 7, 2018, 6:52 p.m. UTC
Interrupts are ignored if no event bit is set in the status status
register and this breaks the buffer interface. No data is shown when
running "iio_generic_buffer -n mma8451 -a" and interrupt counts go
crazy.

Fix by not returning IRQ_NONE if DRDY is set.

Fixes: 605f72de137a ("iio: accel: mma8452: improvements to handle
multiple events")

Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com>

---
 drivers/iio/accel/mma8452.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

Perhaps this whole early-exit check could be dropped? It is not clear
how it helps.

If for some models we want to ignore unsupported events then maybe this
should be checked for each individual bit. Instead of

if (src & MMA8452_INT_FF_MT) {

Check for:

if ((src & MMA8452_INT_FF_MT) && (data->chip_info->enabled_events & MMA8452_INT_FF_MT))

Comments

harinath Nampally June 22, 2018, 1:34 a.m. UTC | #1
On 2018-06-07 20:52, Leonard Crestez wrote:
> Interrupts are ignored if no event bit is set in the status status
> register and this breaks the buffer interface. No data is shown when
> running "iio_generic_buffer -n mma8451 -a" and interrupt counts go
> crazy.
>
> Fix by not returning IRQ_NONE if DRDY is set.
>
> Fixes: 605f72de137a ("iio: accel: mma8452: improvements to handle
> multiple events")
>
> Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com>
Thanks for catching it. Looks good to me.
Acked-by: Harinath Nampally <harinath922@gmail.com>

Thanks,
Harinath


On Wed, Jun 20, 2018 at 5:15 AM, Martin Kepplinger <martink@posteo.de> wrote:
> On 2018-06-07 20:52, Leonard Crestez wrote:
>> Interrupts are ignored if no event bit is set in the status status
>> register and this breaks the buffer interface. No data is shown when
>> running "iio_generic_buffer -n mma8451 -a" and interrupt counts go
>> crazy.
>>
>> Fix by not returning IRQ_NONE if DRDY is set.
>>
>> Fixes: 605f72de137a ("iio: accel: mma8452: improvements to handle
>> multiple events")
>>
>> Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com>
>
> At least this does no harm to events. So if this solves your problem:
>
> Acked-by: Martin Kepplinger <martink@posteo.de>
>
> thanks,
>
>                             martin
>
>>
>> ---
>>  drivers/iio/accel/mma8452.c | 2 +-
>>  1 file changed, 1 insertion(+), 1 deletion(-)
>>
>> Perhaps this whole early-exit check could be dropped? It is not clear
>> how it helps.
>>
>> If for some models we want to ignore unsupported events then maybe this
>> should be checked for each individual bit. Instead of
>>
>> if (src & MMA8452_INT_FF_MT) {
>>
>> Check for:
>>
>> if ((src & MMA8452_INT_FF_MT) && (data->chip_info->enabled_events & MMA8452_INT_FF_MT))
>>
>> diff --git a/drivers/iio/accel/mma8452.c b/drivers/iio/accel/mma8452.c
>> index 7a2da7f9d4dc..5485b35fe553 100644
>> --- a/drivers/iio/accel/mma8452.c
>> +++ b/drivers/iio/accel/mma8452.c
>> @@ -1032,11 +1032,11 @@ static irqreturn_t mma8452_interrupt(int irq, void *p)
>>
>>       src = i2c_smbus_read_byte_data(data->client, MMA8452_INT_SRC);
>>       if (src < 0)
>>               return IRQ_NONE;
>>
>> -     if (!(src & data->chip_info->enabled_events))
>> +     if (!(src & (data->chip_info->enabled_events | MMA8452_INT_DRDY)))
>>               return IRQ_NONE;
>>
>>       if (src & MMA8452_INT_DRDY) {
>>               iio_trigger_poll_chained(indio_dev->trig);
>>               ret = IRQ_HANDLED;
>>
>

Patch
diff mbox series

diff --git a/drivers/iio/accel/mma8452.c b/drivers/iio/accel/mma8452.c
index 7a2da7f9d4dc..5485b35fe553 100644
--- a/drivers/iio/accel/mma8452.c
+++ b/drivers/iio/accel/mma8452.c
@@ -1032,11 +1032,11 @@  static irqreturn_t mma8452_interrupt(int irq, void *p)
 
 	src = i2c_smbus_read_byte_data(data->client, MMA8452_INT_SRC);
 	if (src < 0)
 		return IRQ_NONE;
 
-	if (!(src & data->chip_info->enabled_events))
+	if (!(src & (data->chip_info->enabled_events | MMA8452_INT_DRDY)))
 		return IRQ_NONE;
 
 	if (src & MMA8452_INT_DRDY) {
 		iio_trigger_poll_chained(indio_dev->trig);
 		ret = IRQ_HANDLED;