From: Leonard Crestez <leonard.crestez@nxp.com>
To: Lucas Stach <l.stach@pengutronix.de>,
Shawn Guo <shawnguo@kernel.org>,
"Rafael J. Wysocki" <rjw@rjwysocki.net>
Cc: Andrey Smirnov <andrew.smirnov@gmail.com>,
Fabio Estevam <fabio.estevam@nxp.com>,
Viresh Kumar <viresh.kumar@linaro.org>,
Dong Aisheng <aisheng.dong@nxp.com>,
linux-pm@vger.kernel.org, linux-imx@nxp.com,
kernel@pengutronix.de, linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org
Subject: [PATCH v2] soc: imx: gpc: Turn PU domain on/off in sleep on 6qp
Date: Thu, 5 Jul 2018 18:12:43 +0300 [thread overview]
Message-ID: <72f3e615f4df69ee6d802efbd1e1e52692c8e134.1530803324.git.leonard.crestez@nxp.com> (raw)
On imx6qp power gating on the PU domain is disabled because of errata
ERR009619. However power gating during suspend/resume can still be
performed.
Enable this by implementing SLEEP_PM_OPS in imx_pgc_power_domain_driver.
Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com>
---
drivers/soc/imx/gpc.c | 72 ++++++++++++++++++++++++++++++++++---------
1 file changed, 57 insertions(+), 15 deletions(-)
Changes since v1: Implement SLEEP_PM_OPS instead of calling from
platform-level suspend code, as suggested by Lucas.
I'm not sure if doing interesting things in the pm_ops for PM providers
is recommended. Is correct ordering guaranteed in such a case? Any
VPU/GPU suspend code must execute before imx_pgc_suspend or it might try
to access registers in a region which is powered off.
Perhaps ordering needs to be guaranteed by implementing device_attach
and adding explicit device links to pgc platform_device?
Link to v1: https://lkml.org/lkml/2018/7/2/370
diff --git a/drivers/soc/imx/gpc.c b/drivers/soc/imx/gpc.c
index b4acdfd3cffd..96d9e882d583 100644
--- a/drivers/soc/imx/gpc.c
+++ b/drivers/soc/imx/gpc.c
@@ -54,19 +54,16 @@ static inline struct imx_pm_domain *
to_imx_pm_domain(struct generic_pm_domain *genpd)
{
return container_of(genpd, struct imx_pm_domain, base);
}
-static int imx6_pm_domain_power_off(struct generic_pm_domain *genpd)
+static void _imx6_pm_domain_power_off(struct generic_pm_domain *genpd)
{
struct imx_pm_domain *pd = to_imx_pm_domain(genpd);
int iso, iso2sw;
u32 val;
- if (pd->flags & PGC_DOMAIN_FLAG_NO_PD)
- return -EBUSY;
-
/* Read ISO and ISO2SW power down delays */
regmap_read(pd->regmap, pd->reg_offs + GPC_PGC_PUPSCR_OFFS, &val);
iso = val & 0x3f;
iso2sw = (val >> 8) & 0x3f;
@@ -78,32 +75,33 @@ static int imx6_pm_domain_power_off(struct generic_pm_domain *genpd)
val = BIT(pd->cntr_pdn_bit);
regmap_update_bits(pd->regmap, GPC_CNTR, val, val);
/* Wait ISO + ISO2SW IPG clock cycles */
udelay(DIV_ROUND_UP(iso + iso2sw, pd->ipg_rate_mhz));
+}
+
+static int imx6_pm_domain_power_off(struct generic_pm_domain *genpd)
+{
+ struct imx_pm_domain *pd = to_imx_pm_domain(genpd);
+
+ if (pd->flags & PGC_DOMAIN_FLAG_NO_PD)
+ return -EBUSY;
+
+ _imx6_pm_domain_power_off(genpd);
if (pd->supply)
regulator_disable(pd->supply);
return 0;
}
-static int imx6_pm_domain_power_on(struct generic_pm_domain *genpd)
+static void _imx6_pm_domain_power_on(struct generic_pm_domain *genpd)
{
struct imx_pm_domain *pd = to_imx_pm_domain(genpd);
- int i, ret, sw, sw2iso;
+ int i, sw, sw2iso;
u32 val;
- if (pd->supply) {
- ret = regulator_enable(pd->supply);
- if (ret) {
- pr_err("%s: failed to enable regulator: %d\n",
- __func__, ret);
- return ret;
- }
- }
-
/* Enable reset clocks for all devices in the domain */
for (i = 0; i < pd->num_clks; i++)
clk_prepare_enable(pd->clk[i]);
/* Gate off domain when powered down */
@@ -123,10 +121,27 @@ static int imx6_pm_domain_power_on(struct generic_pm_domain *genpd)
udelay(DIV_ROUND_UP(sw + sw2iso, pd->ipg_rate_mhz));
/* Disable reset clocks for all devices in the domain */
for (i = 0; i < pd->num_clks; i++)
clk_disable_unprepare(pd->clk[i]);
+}
+
+static int imx6_pm_domain_power_on(struct generic_pm_domain *genpd)
+{
+ struct imx_pm_domain *pd = to_imx_pm_domain(genpd);
+ int ret;
+
+ if (pd->supply) {
+ ret = regulator_enable(pd->supply);
+ if (ret) {
+ pr_err("%s: failed to enable regulator: %d\n",
+ __func__, ret);
+ return ret;
+ }
+ }
+
+ _imx6_pm_domain_power_on(genpd);
return 0;
}
static int imx_pgc_get_clocks(struct device *dev, struct imx_pm_domain *domain)
@@ -227,18 +242,45 @@ static int imx_pgc_power_domain_remove(struct platform_device *pdev)
}
return 0;
}
+static int imx_pgc_suspend(struct device *dev)
+{
+ struct platform_device *pdev = to_platform_device(dev);
+ struct imx_pm_domain *pd = pdev->dev.platform_data;
+
+ if (pd->flags & PGC_DOMAIN_FLAG_NO_PD)
+ _imx6_pm_domain_power_off(&pd->base);
+
+ return 0;
+}
+
+static int imx_pgc_resume(struct device *dev)
+{
+ struct platform_device *pdev = to_platform_device(dev);
+ struct imx_pm_domain *pd = pdev->dev.platform_data;
+
+ if (pd->flags & PGC_DOMAIN_FLAG_NO_PD)
+ _imx6_pm_domain_power_on(&pd->base);
+
+ return 0;
+}
+
+static const struct dev_pm_ops imx_pgc_pm_ops = {
+ SET_SYSTEM_SLEEP_PM_OPS(imx_pgc_suspend, imx_pgc_resume)
+};
+
static const struct platform_device_id imx_pgc_power_domain_id[] = {
{ "imx-pgc-power-domain"},
{ },
};
static struct platform_driver imx_pgc_power_domain_driver = {
.driver = {
.name = "imx-pgc-pd",
+ .pm = &imx_pgc_pm_ops,
},
.probe = imx_pgc_power_domain_probe,
.remove = imx_pgc_power_domain_remove,
.id_table = imx_pgc_power_domain_id,
};
--
2.17.1
next reply other threads:[~2018-07-05 15:13 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-07-05 15:12 Leonard Crestez [this message]
2018-07-05 15:29 ` [PATCH v2] soc: imx: gpc: Turn PU domain on/off in sleep on 6qp Lucas Stach
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=72f3e615f4df69ee6d802efbd1e1e52692c8e134.1530803324.git.leonard.crestez@nxp.com \
--to=leonard.crestez@nxp.com \
--cc=aisheng.dong@nxp.com \
--cc=andrew.smirnov@gmail.com \
--cc=fabio.estevam@nxp.com \
--cc=kernel@pengutronix.de \
--cc=l.stach@pengutronix.de \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-imx@nxp.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pm@vger.kernel.org \
--cc=rjw@rjwysocki.net \
--cc=shawnguo@kernel.org \
--cc=viresh.kumar@linaro.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).