From: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org>
To: grygorii.strashko@ti.com, davem@davemloft.net
Cc: linux-omap@vger.kernel.org, netdev@vger.kernel.org,
linux-kernel@vger.kernel.org,
Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org>
Subject: [PATCH 1/2] net: ethernet: ti: cpsw: use BIT macro
Date: Fri, 6 Jul 2018 21:44:44 +0300 [thread overview]
Message-ID: <20180706184445.29111-2-ivan.khoronzhuk@linaro.org> (raw)
In-Reply-To: <20180706184445.29111-1-ivan.khoronzhuk@linaro.org>
It's needed to avoid checkpatch warnings for farther changes.
Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org>
---
drivers/net/ethernet/ti/cpsw.c | 34 +++++++++++++++++-----------------
1 file changed, 17 insertions(+), 17 deletions(-)
diff --git a/drivers/net/ethernet/ti/cpsw.c b/drivers/net/ethernet/ti/cpsw.c
index 093998124149..f355e65323f3 100644
--- a/drivers/net/ethernet/ti/cpsw.c
+++ b/drivers/net/ethernet/ti/cpsw.c
@@ -253,23 +253,23 @@ struct cpsw_ss_regs {
#define RX_DSCP_PRI_MAP7 0x4c /* Rx DSCP Priority to Rx Packet Mapping */
/* Bit definitions for the CPSW2_CONTROL register */
-#define PASS_PRI_TAGGED (1<<24) /* Pass Priority Tagged */
-#define VLAN_LTYPE2_EN (1<<21) /* VLAN LTYPE 2 enable */
-#define VLAN_LTYPE1_EN (1<<20) /* VLAN LTYPE 1 enable */
-#define DSCP_PRI_EN (1<<16) /* DSCP Priority Enable */
-#define TS_320 (1<<14) /* Time Sync Dest Port 320 enable */
-#define TS_319 (1<<13) /* Time Sync Dest Port 319 enable */
-#define TS_132 (1<<12) /* Time Sync Dest IP Addr 132 enable */
-#define TS_131 (1<<11) /* Time Sync Dest IP Addr 131 enable */
-#define TS_130 (1<<10) /* Time Sync Dest IP Addr 130 enable */
-#define TS_129 (1<<9) /* Time Sync Dest IP Addr 129 enable */
-#define TS_TTL_NONZERO (1<<8) /* Time Sync Time To Live Non-zero enable */
-#define TS_ANNEX_F_EN (1<<6) /* Time Sync Annex F enable */
-#define TS_ANNEX_D_EN (1<<4) /* Time Sync Annex D enable */
-#define TS_LTYPE2_EN (1<<3) /* Time Sync LTYPE 2 enable */
-#define TS_LTYPE1_EN (1<<2) /* Time Sync LTYPE 1 enable */
-#define TS_TX_EN (1<<1) /* Time Sync Transmit Enable */
-#define TS_RX_EN (1<<0) /* Time Sync Receive Enable */
+#define PASS_PRI_TAGGED BIT(24) /* Pass Priority Tagged */
+#define VLAN_LTYPE2_EN BIT(21) /* VLAN LTYPE 2 enable */
+#define VLAN_LTYPE1_EN BIT(20) /* VLAN LTYPE 1 enable */
+#define DSCP_PRI_EN BIT(16) /* DSCP Priority Enable */
+#define TS_320 BIT(14) /* Time Sync Dest Port 320 enable */
+#define TS_319 BIT(13) /* Time Sync Dest Port 319 enable */
+#define TS_132 BIT(12) /* Time Sync Dest IP Addr 132 enable */
+#define TS_131 BIT(11) /* Time Sync Dest IP Addr 131 enable */
+#define TS_130 BIT(10) /* Time Sync Dest IP Addr 130 enable */
+#define TS_129 BIT(9) /* Time Sync Dest IP Addr 129 enable */
+#define TS_TTL_NONZERO BIT(8) /* Time Sync Time To Live Non-zero enable */
+#define TS_ANNEX_F_EN BIT(6) /* Time Sync Annex F enable */
+#define TS_ANNEX_D_EN BIT(4) /* Time Sync Annex D enable */
+#define TS_LTYPE2_EN BIT(3) /* Time Sync LTYPE 2 enable */
+#define TS_LTYPE1_EN BIT(2) /* Time Sync LTYPE 1 enable */
+#define TS_TX_EN BIT(1) /* Time Sync Transmit Enable */
+#define TS_RX_EN BIT(0) /* Time Sync Receive Enable */
#define CTRL_V2_TS_BITS \
(TS_320 | TS_319 | TS_132 | TS_131 | TS_130 | TS_129 |\
--
2.17.1
next prev parent reply other threads:[~2018-07-06 18:45 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-07-06 18:44 [PATCH 0/2] allow PTP 224.0.0.107 to be timestamped Ivan Khoronzhuk
2018-07-06 18:44 ` Ivan Khoronzhuk [this message]
2018-07-06 18:44 ` [PATCH 2/2] net: ethernet: ti: cpsw: " Ivan Khoronzhuk
2018-07-07 12:23 ` [PATCH 0/2] " David Miller
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180706184445.29111-2-ivan.khoronzhuk@linaro.org \
--to=ivan.khoronzhuk@linaro.org \
--cc=davem@davemloft.net \
--cc=grygorii.strashko@ti.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-omap@vger.kernel.org \
--cc=netdev@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).