From: Tiwei Bie <tiwei.bie@intel.com>
To: mst@redhat.com, jasowang@redhat.com,
virtualization@lists.linux-foundation.org,
linux-kernel@vger.kernel.org, netdev@vger.kernel.org,
virtio-dev@lists.oasis-open.org
Cc: wexu@redhat.com, jfreimann@redhat.com, tiwei.bie@intel.com
Subject: [PATCH net-next v1 4/5] virtio_ring: add event idx support in packed ring
Date: Mon, 9 Jul 2018 15:22:40 +0800 [thread overview]
Message-ID: <20180709072241.8886-5-tiwei.bie@intel.com> (raw)
In-Reply-To: <20180709072241.8886-1-tiwei.bie@intel.com>
This commit introduces the EVENT_IDX support in packed ring.
Signed-off-by: Tiwei Bie <tiwei.bie@intel.com>
---
drivers/virtio/virtio_ring.c | 73 ++++++++++++++++++++++++++++++++----
1 file changed, 65 insertions(+), 8 deletions(-)
diff --git a/drivers/virtio/virtio_ring.c b/drivers/virtio/virtio_ring.c
index cb833a82054b..4b3f9e1a3cab 100644
--- a/drivers/virtio/virtio_ring.c
+++ b/drivers/virtio/virtio_ring.c
@@ -1050,7 +1050,7 @@ static inline int virtqueue_add_packed(struct virtqueue *_vq,
static bool virtqueue_kick_prepare_packed(struct virtqueue *_vq)
{
struct vring_virtqueue *vq = to_vvq(_vq);
- u16 flags;
+ u16 new, old, off_wrap, flags, wrap_counter, event_idx;
bool needs_kick;
u32 snapshot;
@@ -1059,9 +1059,19 @@ static bool virtqueue_kick_prepare_packed(struct virtqueue *_vq)
* suppressions. */
virtio_mb(vq->weak_barriers);
+ old = vq->next_avail_idx - vq->num_added;
+ new = vq->next_avail_idx;
+ vq->num_added = 0;
+
snapshot = *(u32 *)vq->vring_packed.device;
+ off_wrap = virtio16_to_cpu(_vq->vdev, (__virtio16)(snapshot & 0xffff));
flags = virtio16_to_cpu(_vq->vdev, (__virtio16)(snapshot >> 16)) & 0x3;
+ wrap_counter = off_wrap >> 15;
+ event_idx = off_wrap & ~(1 << 15);
+ if (wrap_counter != vq->avail_wrap_counter)
+ event_idx -= vq->vring_packed.num;
+
#ifdef DEBUG
if (vq->last_add_time_valid) {
WARN_ON(ktime_to_ms(ktime_sub(ktime_get(),
@@ -1070,7 +1080,10 @@ static bool virtqueue_kick_prepare_packed(struct virtqueue *_vq)
vq->last_add_time_valid = false;
#endif
- needs_kick = (flags != VRING_EVENT_F_DISABLE);
+ if (flags == VRING_EVENT_F_DESC)
+ needs_kick = vring_need_event(event_idx, new, old);
+ else
+ needs_kick = (flags != VRING_EVENT_F_DISABLE);
END_USE(vq);
return needs_kick;
}
@@ -1185,6 +1198,15 @@ static void *virtqueue_get_buf_ctx_packed(struct virtqueue *_vq,
ret = vq->desc_state_packed[id].data;
detach_buf_packed(vq, id, ctx);
+ /* If we expect an interrupt for the next entry, tell host
+ * by writing event index and flush out the write before
+ * the read in the next get_buf call. */
+ if (vq->event_flags_shadow == VRING_EVENT_F_DESC)
+ virtio_store_mb(vq->weak_barriers,
+ &vq->vring_packed.driver->off_wrap,
+ cpu_to_virtio16(_vq->vdev, vq->last_used_idx |
+ ((u16)vq->used_wrap_counter << 15)));
+
#ifdef DEBUG
vq->last_add_time_valid = false;
#endif
@@ -1213,8 +1235,18 @@ static unsigned virtqueue_enable_cb_prepare_packed(struct virtqueue *_vq)
/* We optimistically turn back on interrupts, then check if there was
* more to do. */
+ if (vq->event) {
+ vq->vring_packed.driver->off_wrap = cpu_to_virtio16(_vq->vdev,
+ vq->last_used_idx |
+ ((u16)vq->used_wrap_counter << 15));
+ /* We need to update event offset and event wrap
+ * counter first before updating event flags. */
+ virtio_wmb(vq->weak_barriers);
+ }
+
if (vq->event_flags_shadow == VRING_EVENT_F_DISABLE) {
- vq->event_flags_shadow = VRING_EVENT_F_ENABLE;
+ vq->event_flags_shadow = vq->event ? VRING_EVENT_F_DESC :
+ VRING_EVENT_F_ENABLE;
vq->vring_packed.driver->flags = cpu_to_virtio16(_vq->vdev,
vq->event_flags_shadow);
}
@@ -1238,22 +1270,47 @@ static bool virtqueue_poll_packed(struct virtqueue *_vq, unsigned off_wrap)
static bool virtqueue_enable_cb_delayed_packed(struct virtqueue *_vq)
{
struct vring_virtqueue *vq = to_vvq(_vq);
+ u16 bufs, used_idx, wrap_counter;
START_USE(vq);
/* We optimistically turn back on interrupts, then check if there was
* more to do. */
+ if (vq->event) {
+ /* TODO: tune this threshold */
+ bufs = (vq->vring_packed.num - _vq->num_free) * 3 / 4;
+ wrap_counter = vq->used_wrap_counter;
+
+ used_idx = vq->last_used_idx + bufs;
+ if (used_idx >= vq->vring_packed.num) {
+ used_idx -= vq->vring_packed.num;
+ wrap_counter ^= 1;
+ }
+
+ vq->vring_packed.driver->off_wrap = cpu_to_virtio16(_vq->vdev,
+ used_idx | (wrap_counter << 15));
+
+ /* We need to update event offset and event wrap
+ * counter first before updating event flags. */
+ virtio_wmb(vq->weak_barriers);
+ } else {
+ used_idx = vq->last_used_idx;
+ wrap_counter = vq->used_wrap_counter;
+ }
+
if (vq->event_flags_shadow == VRING_EVENT_F_DISABLE) {
- vq->event_flags_shadow = VRING_EVENT_F_ENABLE;
+ vq->event_flags_shadow = vq->event ? VRING_EVENT_F_DESC :
+ VRING_EVENT_F_ENABLE;
vq->vring_packed.driver->flags = cpu_to_virtio16(_vq->vdev,
vq->event_flags_shadow);
- /* We need to enable interrupts first before re-checking
- * for more used buffers. */
- virtio_mb(vq->weak_barriers);
}
- if (more_used_packed(vq)) {
+ /* We need to update event suppression structure first
+ * before re-checking for more used buffers. */
+ virtio_mb(vq->weak_barriers);
+
+ if (is_used_desc_packed(vq, used_idx, wrap_counter)) {
END_USE(vq);
return false;
}
--
2.18.0
next prev parent reply other threads:[~2018-07-09 7:23 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-07-09 7:22 [PATCH net-next v1 0/5] virtio: support packed ring Tiwei Bie
2018-07-09 7:22 ` [PATCH net-next v1 1/5] virtio: add packed ring definitions Tiwei Bie
2018-07-09 7:22 ` [PATCH net-next v1 2/5] virtio_ring: support creating packed ring Tiwei Bie
2018-07-09 7:22 ` [PATCH net-next v1 3/5] virtio_ring: add packed ring support Tiwei Bie
2018-07-09 7:22 ` Tiwei Bie [this message]
2018-07-10 5:50 ` [PATCH net-next v1 4/5] virtio_ring: add event idx support in packed ring Jason Wang
2018-07-11 1:09 ` [virtio-dev] " Tiwei Bie
2018-07-09 7:22 ` [PATCH net-next v1 5/5] virtio_ring: enable " Tiwei Bie
2018-07-10 5:51 ` Jason Wang
2018-07-11 1:07 ` Tiwei Bie
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180709072241.8886-5-tiwei.bie@intel.com \
--to=tiwei.bie@intel.com \
--cc=jasowang@redhat.com \
--cc=jfreimann@redhat.com \
--cc=linux-kernel@vger.kernel.org \
--cc=mst@redhat.com \
--cc=netdev@vger.kernel.org \
--cc=virtio-dev@lists.oasis-open.org \
--cc=virtualization@lists.linux-foundation.org \
--cc=wexu@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).