From: Srinath Mannam <srinath.mannam@broadcom.com>
To: wim@linux-watchdog.org, linux@roeck-us.net
Cc: ray.jui@broadcom.com, vladimir.olovyannikov@broadcom.com,
vikram.prakash@broadcom.com, scott.branden@broadcom.com,
sudeep.holla@arm.com, linux-watchdog@vger.kernel.org,
linux-kernel@vger.kernel.org,
Srinath Mannam <srinath.mannam@broadcom.com>
Subject: [RFC PATCH v2] watchdog: sp805: Add clock-frequency property
Date: Mon, 9 Jul 2018 15:49:29 +0530 [thread overview]
Message-ID: <1531131569-13727-1-git-send-email-srinath.mannam@broadcom.com> (raw)
When using ACPI node, binding clock devices are
not available as device tree, So clock-frequency
property given in _DSD object of ACPI device is
used to calculate Watchdog rate.
Signed-off-by: Srinath Mannam <srinath.mannam@broadcom.com>
---
drivers/watchdog/sp805_wdt.c | 34 ++++++++++++++++++++++++++--------
1 file changed, 26 insertions(+), 8 deletions(-)
diff --git a/drivers/watchdog/sp805_wdt.c b/drivers/watchdog/sp805_wdt.c
index 9849db0..ad5ed64 100644
--- a/drivers/watchdog/sp805_wdt.c
+++ b/drivers/watchdog/sp805_wdt.c
@@ -11,6 +11,7 @@
* warranty of any kind, whether express or implied.
*/
+#include <linux/acpi.h>
#include <linux/device.h>
#include <linux/resource.h>
#include <linux/amba/bus.h>
@@ -22,6 +23,7 @@
#include <linux/math64.h>
#include <linux/module.h>
#include <linux/moduleparam.h>
+#include <linux/of.h>
#include <linux/pm.h>
#include <linux/slab.h>
#include <linux/spinlock.h>
@@ -65,6 +67,7 @@ struct sp805_wdt {
spinlock_t lock;
void __iomem *base;
struct clk *clk;
+ u64 rate;
struct amba_device *adev;
unsigned int load_val;
};
@@ -80,7 +83,7 @@ static int wdt_setload(struct watchdog_device *wdd, unsigned int timeout)
struct sp805_wdt *wdt = watchdog_get_drvdata(wdd);
u64 load, rate;
- rate = clk_get_rate(wdt->clk);
+ rate = wdt->rate;
/*
* sp805 runs counter with given value twice, after the end of first
@@ -106,9 +109,7 @@ static int wdt_setload(struct watchdog_device *wdd, unsigned int timeout)
static unsigned int wdt_timeleft(struct watchdog_device *wdd)
{
struct sp805_wdt *wdt = watchdog_get_drvdata(wdd);
- u64 load, rate;
-
- rate = clk_get_rate(wdt->clk);
+ u64 load;
spin_lock(&wdt->lock);
load = readl_relaxed(wdt->base + WDTVALUE);
@@ -118,7 +119,7 @@ static unsigned int wdt_timeleft(struct watchdog_device *wdd)
load += wdt->load_val + 1;
spin_unlock(&wdt->lock);
- return div_u64(load, rate);
+ return div_u64(load, wdt->rate);
}
static int
@@ -228,10 +229,27 @@ sp805_wdt_probe(struct amba_device *adev, const struct amba_id *id)
if (IS_ERR(wdt->base))
return PTR_ERR(wdt->base);
- wdt->clk = devm_clk_get(&adev->dev, NULL);
- if (IS_ERR(wdt->clk)) {
+ if (adev->dev.of_node) {
+ wdt->clk = devm_clk_get(&adev->dev, NULL);
+ if (IS_ERR(wdt->clk)) {
+ ret = PTR_ERR(wdt->clk);
+ wdt->clk = NULL;
+ } else
+ wdt->rate = clk_get_rate(wdt->clk);
+ } else if (has_acpi_companion(&adev->dev)) {
+ /*
+ * When Driver probe with ACPI device, clock devices
+ * are not available, so watchdog rate get from
+ * clock-frequency property given in _DSD object.
+ */
+ device_property_read_u64(&adev->dev, "clock-frequency",
+ &wdt->rate);
+ if (!wdt->rate)
+ ret = -ENODEV;
+ }
+
+ if (ret) {
dev_warn(&adev->dev, "Clock not found\n");
- ret = PTR_ERR(wdt->clk);
goto err;
}
--
2.7.4
next reply other threads:[~2018-07-09 10:20 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-07-09 10:19 Srinath Mannam [this message]
2018-07-09 13:45 ` [RFC PATCH v2] watchdog: sp805: Add clock-frequency property Guenter Roeck
2018-07-10 7:57 ` Srinath Mannam
2018-07-10 8:01 ` Srinath Mannam
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1531131569-13727-1-git-send-email-srinath.mannam@broadcom.com \
--to=srinath.mannam@broadcom.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-watchdog@vger.kernel.org \
--cc=linux@roeck-us.net \
--cc=ray.jui@broadcom.com \
--cc=scott.branden@broadcom.com \
--cc=sudeep.holla@arm.com \
--cc=vikram.prakash@broadcom.com \
--cc=vladimir.olovyannikov@broadcom.com \
--cc=wim@linux-watchdog.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).