[PATCH 1/4] dt-bindings: nvmem: Add Spreadtrum SC27XX efuse controller documentation

From: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
To: gregkh@linuxfoundation.org
Cc: linux-kernel@vger.kernel.org, srinivas.kandagatla@linaro.org,
	Baolin Wang <baolin.wang@linaro.org>
Subject: [PATCH 1/4] dt-bindings: nvmem: Add Spreadtrum SC27XX efuse controller documentation
Date: Wed, 11 Jul 2018 11:20:40 +0100	[thread overview]
Message-ID: <20180711102043.24079-2-srinivas.kandagatla@linaro.org> (raw)
In-Reply-To: <20180711102043.24079-1-srinivas.kandagatla@linaro.org>

From: Baolin Wang <baolin.wang@linaro.org>

This patch adds the binding documentation for Spreadtrum SC27XX series
PMICs efuse controller device.

Signed-off-by: Baolin Wang <baolin.wang@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
---
 .../devicetree/bindings/nvmem/sc27xx-efuse.txt     | 52 ++++++++++++++++++++++
 1 file changed, 52 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/nvmem/sc27xx-efuse.txt

diff --git a/Documentation/devicetree/bindings/nvmem/sc27xx-efuse.txt b/Documentation/devicetree/bindings/nvmem/sc27xx-efuse.txt
new file mode 100644
index 000000000000..586c08286aa9
--- /dev/null
+++ b/Documentation/devicetree/bindings/nvmem/sc27xx-efuse.txt
@@ -0,0 +1,52 @@
+= Spreadtrum SC27XX PMIC eFuse device tree bindings =
+
+Required properties:
+- compatible: Should be one of the following.
+	"sprd,sc2720-efuse"
+	"sprd,sc2721-efuse"
+	"sprd,sc2723-efuse"
+	"sprd,sc2730-efuse"
+	"sprd,sc2731-efuse"
+- reg: Specify the address offset of efuse controller.
+- hwlocks: Reference to a phandle of a hwlock provider node.
+
+= Data cells =
+Are child nodes of eFuse, bindings of which as described in
+bindings/nvmem/nvmem.txt
+
+Example:
+
+	sc2731_pmic: pmic@0 {
+		compatible = "sprd,sc2731";
+		reg = <0>;
+		spi-max-frequency = <26000000>;
+		interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		efuse@380 {
+			compatible = "sprd,sc2731-efuse";
+			reg = <0x380>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			hwlocks = <&hwlock 12>;
+
+			/* Data cells */
+			thermal_calib: calib@10 {
+				reg = <0x10 0x2>;
+			};
+		};
+	};
+
+= Data consumers =
+Are device nodes which consume nvmem data cells.
+
+Example:
+
+	thermal {
+		...
+		nvmem-cells = <&thermal_calib>;
+		nvmem-cell-names = "calibration";
+	};
-- 
2.16.2

