linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Leonard Crestez <leonard.crestez@nxp.com>
To: Marek Vasut <marex@denx.de>, Stefan Agner <stefan@agner.ch>,
	Shawn Guo <shawnguo@kernel.org>
Cc: Lucas Stach <l.stach@pengutronix.de>,
	Fabio Estevam <fabio.estevam@nxp.com>,
	Robert Chiras <robert.chiras@nxp.com>,
	Anson Huang <Anson.Huang@nxp.com>,
	David Airlie <airlied@linux.ie>,
	dri-devel@lists.freedesktop.org, kernel@pengutronix.de,
	linux-imx@nxp.com, linux-kernel@vger.kernel.org
Subject: [PATCH v2] drm/mxsfb: Fix runtime PM for unpowering lcdif block
Date: Tue, 17 Jul 2018 13:48:31 +0300	[thread overview]
Message-ID: <f873c5592e9907beba905ce68358d5ae2f63a4d7.1531824173.git.leonard.crestez@nxp.com> (raw)

Adding lcdif nodes to a power domain currently does work, it results in
black/corrupted screens or hangs. While the driver does enable runtime
pm it does not deal correctly with the block being unpowered.

Ensure power is on when required by adding pm_runtime_get/put_sync to
mxsfb_pipe_enable/disable.

Since power is lost on suspend implement PM_SLEEP_OPS using
drm_mode_config_helper_suspend/resume.

The mxsfb_plane_atomic_update function can get called before
mxsfb_pipe_enable while the block is not yet powered. When this happens
the write to LCDIF_NEXT_BUF is lost causing corrupt display on unblank
until a refresh.

Fix this by not writing gem->paddr if the block is not enabled and
instead delaying the write until the next mxsfb_crtc_mode_set_nofb call.
At that point also update cur_buf to avoid an initial corrupt frame
after resume.

Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com>

---

The purpose of this patch is to prepare for enabling power gating on
DISPLAY power domains.

Changes since v1:
* Drop mxsfb_runtime_suspend/mxsfb_runtime_resume, calling
pm_runtime_get/put in pipe enable/disable is enough.
* Use drm_mode_config_helper_suspend/resume instead of attempting to
track state manually.
* Don't touch NEXT_BUF if atomic_update called with crtc disabled
* Also update CUR_BUF on enable, this avoids initial corrupt frames.

Previous discussion: https://lkml.org/lkml/2018/7/17/329
---
 drivers/gpu/drm/mxsfb/mxsfb_crtc.c | 51 +++++++++++++++++++++++-------
 drivers/gpu/drm/mxsfb/mxsfb_drv.c  | 25 +++++++++++++++
 drivers/gpu/drm/mxsfb/mxsfb_drv.h  |  2 ++
 3 files changed, 67 insertions(+), 11 deletions(-)

diff --git a/drivers/gpu/drm/mxsfb/mxsfb_crtc.c b/drivers/gpu/drm/mxsfb/mxsfb_crtc.c
index 0abe77675b76..10153da77c40 100644
--- a/drivers/gpu/drm/mxsfb/mxsfb_crtc.c
+++ b/drivers/gpu/drm/mxsfb/mxsfb_crtc.c
@@ -194,15 +194,31 @@ static int mxsfb_reset_block(void __iomem *reset_addr)
 		return ret;
 
 	return clear_poll_bit(reset_addr, MODULE_CLKGATE);
 }
 
+static dma_addr_t mxsfb_get_fb_paddr(struct mxsfb_drm_private *mxsfb)
+{
+	struct drm_framebuffer *fb = mxsfb->pipe.plane.state->fb;
+	struct drm_gem_cma_object *gem;
+
+	if (!fb)
+		return 0;
+
+	gem = drm_fb_cma_get_gem_obj(fb, 0);
+	if (!gem)
+		return 0;
+
+	return gem->paddr;
+}
+
 static void mxsfb_crtc_mode_set_nofb(struct mxsfb_drm_private *mxsfb)
 {
 	struct drm_display_mode *m = &mxsfb->pipe.crtc.state->adjusted_mode;
 	const u32 bus_flags = mxsfb->connector.display_info.bus_flags;
 	u32 vdctrl0, vsync_pulse_len, hsync_pulse_len;
+	dma_addr_t paddr;
 	int err;
 
 	/*
 	 * It seems, you can't re-program the controller if it is still
 	 * running. This may lead to shifted pictures (FIFO issue?), so
@@ -268,35 +284,47 @@ static void mxsfb_crtc_mode_set_nofb(struct mxsfb_drm_private *mxsfb)
 	       mxsfb->base + LCDC_VDCTRL3);
 
 	writel(SET_DOTCLK_H_VALID_DATA_CNT(m->hdisplay),
 	       mxsfb->base + LCDC_VDCTRL4);
 
+	/* Update cur_buf as well to avoid an initial corrupt frame */
+	paddr = mxsfb_get_fb_paddr(mxsfb);
+	if (paddr) {
+		writel(paddr, mxsfb->base + mxsfb->devdata->cur_buf);
+		writel(paddr, mxsfb->base + mxsfb->devdata->next_buf);
+	}
 	mxsfb_disable_axi_clk(mxsfb);
 }
 
 void mxsfb_crtc_enable(struct mxsfb_drm_private *mxsfb)
 {
+	if (mxsfb->enabled)
+		return;
+
 	mxsfb_crtc_mode_set_nofb(mxsfb);
 	mxsfb_enable_controller(mxsfb);
+
+	mxsfb->enabled = true;
 }
 
 void mxsfb_crtc_disable(struct mxsfb_drm_private *mxsfb)
 {
+	if (!mxsfb->enabled)
+		return;
+
 	mxsfb_disable_controller(mxsfb);
+
+	mxsfb->enabled = false;
 }
 
 void mxsfb_plane_atomic_update(struct mxsfb_drm_private *mxsfb,
 			       struct drm_plane_state *state)
 {
 	struct drm_simple_display_pipe *pipe = &mxsfb->pipe;
 	struct drm_crtc *crtc = &pipe->crtc;
-	struct drm_framebuffer *fb = pipe->plane.state->fb;
 	struct drm_pending_vblank_event *event;
-	struct drm_gem_cma_object *gem;
-
-	if (!crtc)
-		return;
+	dma_addr_t paddr;
 
 	spin_lock_irq(&crtc->dev->event_lock);
 	event = crtc->state->event;
 	if (event) {
 		crtc->state->event = NULL;
@@ -307,14 +335,15 @@ void mxsfb_plane_atomic_update(struct mxsfb_drm_private *mxsfb,
 			drm_crtc_send_vblank_event(crtc, event);
 		}
 	}
 	spin_unlock_irq(&crtc->dev->event_lock);
 
-	if (!fb)
+	if (!mxsfb->enabled)
 		return;
 
-	gem = drm_fb_cma_get_gem_obj(fb, 0);
-
-	mxsfb_enable_axi_clk(mxsfb);
-	writel(gem->paddr, mxsfb->base + mxsfb->devdata->next_buf);
-	mxsfb_disable_axi_clk(mxsfb);
+	paddr = mxsfb_get_fb_paddr(mxsfb);
+	if (paddr) {
+		mxsfb_enable_axi_clk(mxsfb);
+		writel(paddr, mxsfb->base + mxsfb->devdata->next_buf);
+		mxsfb_disable_axi_clk(mxsfb);
+	}
 }
diff --git a/drivers/gpu/drm/mxsfb/mxsfb_drv.c b/drivers/gpu/drm/mxsfb/mxsfb_drv.c
index dd1dd58e4956..a5269fccbed9 100644
--- a/drivers/gpu/drm/mxsfb/mxsfb_drv.c
+++ b/drivers/gpu/drm/mxsfb/mxsfb_drv.c
@@ -101,23 +101,27 @@ static const struct drm_mode_config_funcs mxsfb_mode_config_funcs = {
 static void mxsfb_pipe_enable(struct drm_simple_display_pipe *pipe,
 			      struct drm_crtc_state *crtc_state,
 			      struct drm_plane_state *plane_state)
 {
 	struct mxsfb_drm_private *mxsfb = drm_pipe_to_mxsfb_drm_private(pipe);
+	struct drm_device *drm = pipe->plane.dev;
 
+	pm_runtime_get_sync(drm->dev);
 	drm_panel_prepare(mxsfb->panel);
 	mxsfb_crtc_enable(mxsfb);
 	drm_panel_enable(mxsfb->panel);
 }
 
 static void mxsfb_pipe_disable(struct drm_simple_display_pipe *pipe)
 {
 	struct mxsfb_drm_private *mxsfb = drm_pipe_to_mxsfb_drm_private(pipe);
+	struct drm_device *drm = pipe->plane.dev;
 
 	drm_panel_disable(mxsfb->panel);
 	mxsfb_crtc_disable(mxsfb);
 	drm_panel_unprepare(mxsfb->panel);
+	pm_runtime_put_sync(drm->dev);
 }
 
 static void mxsfb_pipe_update(struct drm_simple_display_pipe *pipe,
 			      struct drm_plane_state *plane_state)
 {
@@ -412,17 +416,38 @@ static int mxsfb_remove(struct platform_device *pdev)
 	drm_dev_unref(drm);
 
 	return 0;
 }
 
+#ifdef CONFIG_PM
+static int mxsfb_suspend(struct device *dev)
+{
+       struct drm_device *drm = dev_get_drvdata(dev);
+
+       return drm_mode_config_helper_suspend(drm);
+}
+
+static int mxsfb_resume(struct device *dev)
+{
+       struct drm_device *drm = dev_get_drvdata(dev);
+
+       return drm_mode_config_helper_resume(drm);
+}
+#endif
+
+static const struct dev_pm_ops mxsfb_pm_ops = {
+       SET_SYSTEM_SLEEP_PM_OPS(mxsfb_suspend, mxsfb_resume)
+};
+
 static struct platform_driver mxsfb_platform_driver = {
 	.probe		= mxsfb_probe,
 	.remove		= mxsfb_remove,
 	.id_table	= mxsfb_devtype,
 	.driver	= {
 		.name		= "mxsfb-drm",
 		.of_match_table	= mxsfb_dt_ids,
+		.pm		= &mxsfb_pm_ops,
 	},
 };
 
 module_platform_driver(mxsfb_platform_driver);
 
diff --git a/drivers/gpu/drm/mxsfb/mxsfb_drv.h b/drivers/gpu/drm/mxsfb/mxsfb_drv.h
index 5d0883fc805b..e539d4b05c48 100644
--- a/drivers/gpu/drm/mxsfb/mxsfb_drv.h
+++ b/drivers/gpu/drm/mxsfb/mxsfb_drv.h
@@ -36,10 +36,12 @@ struct mxsfb_drm_private {
 
 	struct drm_simple_display_pipe	pipe;
 	struct drm_connector		connector;
 	struct drm_panel		*panel;
 	struct drm_fbdev_cma		*fbdev;
+
+	bool enabled;
 };
 
 int mxsfb_setup_crtc(struct drm_device *dev);
 int mxsfb_create_output(struct drm_device *dev);
 
-- 
2.17.1


             reply	other threads:[~2018-07-17 10:49 UTC|newest]

Thread overview: 9+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-07-17 10:48 Leonard Crestez [this message]
2018-07-31 11:16 ` [PATCH v2] drm/mxsfb: Fix runtime PM for unpowering lcdif block Leonard Crestez
2018-07-31 11:54 ` Philipp Zabel
2018-07-31 12:17   ` Leonard Crestez
2018-08-02 10:17     ` Philipp Zabel
2018-08-02 11:06       ` Stefan Agner
2018-08-02 11:39         ` Leonard Crestez
2018-08-01 10:00 ` Stefan Agner
2018-08-02 11:40   ` Philipp Zabel

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=f873c5592e9907beba905ce68358d5ae2f63a4d7.1531824173.git.leonard.crestez@nxp.com \
    --to=leonard.crestez@nxp.com \
    --cc=Anson.Huang@nxp.com \
    --cc=airlied@linux.ie \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=fabio.estevam@nxp.com \
    --cc=kernel@pengutronix.de \
    --cc=l.stach@pengutronix.de \
    --cc=linux-imx@nxp.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=marex@denx.de \
    --cc=robert.chiras@nxp.com \
    --cc=shawnguo@kernel.org \
    --cc=stefan@agner.ch \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).