linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Suzuki K Poulose <suzuki.poulose@arm.com>
To: linux-arm-kernel@lists.infradead.org
Cc: linux-kernel@vger.kernel.org, robert.walker@arm.com,
	mathieu.poirier@linaro.org, mike.leach@linaro.org,
	coresight@lists.linaro.org,
	Suzuki K Poulose <suzuki.poulose@arm.com>
Subject: [PATCH v2 07/10] coresight: perf: Remove reset_buffer call back for sinks
Date: Tue, 17 Jul 2018 18:11:38 +0100	[thread overview]
Message-ID: <1531847501-22226-8-git-send-email-suzuki.poulose@arm.com> (raw)
In-Reply-To: <1531847501-22226-1-git-send-email-suzuki.poulose@arm.com>

Right now we issue an update_buffer() and reset_buffer() call backs
in succession when we stop tracing an event. The update_buffer is
supposed to check the status of the buffer and make sure the ring buffer
is updated with the trace data. And we store information about the
size of the data collected only to be consumed by the reset_buffer
callback which always follows the update_buffer. This was originally
designed for handling future IPs which could trigger a buffer overflow
interrupt. This patch gets rid of the reset_buffer callback altogether
and performs the actions in update_buffer, making it return the size
collected. We can always add the support for handling the overflow
interrupt case later.

This removes some not-so pretty hack (storing the new head in the
size field for snapshot mode) and cleans it up a little bit.

Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
---
 drivers/hwtracing/coresight/coresight-etb10.c    | 56 +++++------------------
 drivers/hwtracing/coresight/coresight-etm-perf.c |  9 +---
 drivers/hwtracing/coresight/coresight-tmc-etf.c  | 58 +++++-------------------
 include/linux/coresight.h                        |  6 +--
 4 files changed, 26 insertions(+), 103 deletions(-)

diff --git a/drivers/hwtracing/coresight/coresight-etb10.c b/drivers/hwtracing/coresight/coresight-etb10.c
index 73878a6..a729a7b 100644
--- a/drivers/hwtracing/coresight/coresight-etb10.c
+++ b/drivers/hwtracing/coresight/coresight-etb10.c
@@ -315,37 +315,7 @@ static int etb_set_buffer(struct coresight_device *csdev,
 	return ret;
 }
 
-static unsigned long etb_reset_buffer(struct coresight_device *csdev,
-				      struct perf_output_handle *handle,
-				      void *sink_config)
-{
-	unsigned long size = 0;
-	struct cs_buffers *buf = sink_config;
-
-	if (buf) {
-		/*
-		 * In snapshot mode ->data_size holds the new address of the
-		 * ring buffer's head.  The size itself is the whole address
-		 * range since we want the latest information.
-		 */
-		if (buf->snapshot)
-			handle->head = local_xchg(&buf->data_size,
-						  buf->nr_pages << PAGE_SHIFT);
-
-		/*
-		 * Tell the tracer PMU how much we got in this run and if
-		 * something went wrong along the way.  Nobody else can use
-		 * this cs_buffers instance until we are done.  As such
-		 * resetting parameters here and squaring off with the ring
-		 * buffer API in the tracer PMU is fine.
-		 */
-		size = local_xchg(&buf->data_size, 0);
-	}
-
-	return size;
-}
-
-static void etb_update_buffer(struct coresight_device *csdev,
+static unsigned long etb_update_buffer(struct coresight_device *csdev,
 			      struct perf_output_handle *handle,
 			      void *sink_config)
 {
@@ -354,13 +324,13 @@ static void etb_update_buffer(struct coresight_device *csdev,
 	u8 *buf_ptr;
 	const u32 *barrier;
 	u32 read_ptr, write_ptr, capacity;
-	u32 status, read_data, to_read;
-	unsigned long offset;
+	u32 status, read_data;
+	unsigned long offset, to_read;
 	struct cs_buffers *buf = sink_config;
 	struct etb_drvdata *drvdata = dev_get_drvdata(csdev->dev.parent);
 
 	if (!buf)
-		return;
+		return 0;
 
 	capacity = drvdata->buffer_depth * ETB_FRAME_SIZE_WORDS;
 
@@ -465,18 +435,17 @@ static void etb_update_buffer(struct coresight_device *csdev,
 	writel_relaxed(0x0, drvdata->base + ETB_RAM_WRITE_POINTER);
 
 	/*
-	 * In snapshot mode all we have to do is communicate to
-	 * perf_aux_output_end() the address of the current head.  In full
-	 * trace mode the same function expects a size to move rb->aux_head
-	 * forward.
+	 * In snapshot mode we have to update the handle->head to point
+	 * to the new location.
 	 */
-	if (buf->snapshot)
-		local_set(&buf->data_size, (cur * PAGE_SIZE) + offset);
-	else
-		local_add(to_read, &buf->data_size);
-
+	if (buf->snapshot) {
+		handle->head = (cur * PAGE_SIZE) + offset;
+		to_read = buf->nr_pages << PAGE_SHIFT;
+	}
 	etb_enable_hw(drvdata);
 	CS_LOCK(drvdata->base);
+
+	return to_read;
 }
 
 static const struct coresight_ops_sink etb_sink_ops = {
@@ -485,7 +454,6 @@ static const struct coresight_ops_sink etb_sink_ops = {
 	.alloc_buffer	= etb_alloc_buffer,
 	.free_buffer	= etb_free_buffer,
 	.set_buffer	= etb_set_buffer,
-	.reset_buffer	= etb_reset_buffer,
 	.update_buffer	= etb_update_buffer,
 };
 
diff --git a/drivers/hwtracing/coresight/coresight-etm-perf.c b/drivers/hwtracing/coresight/coresight-etm-perf.c
index 48b7d65b..6a4252b 100644
--- a/drivers/hwtracing/coresight/coresight-etm-perf.c
+++ b/drivers/hwtracing/coresight/coresight-etm-perf.c
@@ -352,15 +352,8 @@ static void etm_event_stop(struct perf_event *event, int mode)
 		if (!sink_ops(sink)->update_buffer)
 			return;
 
-		sink_ops(sink)->update_buffer(sink, handle,
+		size = sink_ops(sink)->update_buffer(sink, handle,
 					      event_data->snk_config);
-
-		if (!sink_ops(sink)->reset_buffer)
-			return;
-
-		size = sink_ops(sink)->reset_buffer(sink, handle,
-						    event_data->snk_config);
-
 		perf_aux_output_end(handle, size);
 	}
 
diff --git a/drivers/hwtracing/coresight/coresight-tmc-etf.c b/drivers/hwtracing/coresight/coresight-tmc-etf.c
index 434003a..31a98f9 100644
--- a/drivers/hwtracing/coresight/coresight-tmc-etf.c
+++ b/drivers/hwtracing/coresight/coresight-tmc-etf.c
@@ -349,36 +349,7 @@ static int tmc_set_etf_buffer(struct coresight_device *csdev,
 	return ret;
 }
 
-static unsigned long tmc_reset_etf_buffer(struct coresight_device *csdev,
-					  struct perf_output_handle *handle,
-					  void *sink_config)
-{
-	long size = 0;
-	struct cs_buffers *buf = sink_config;
-
-	if (buf) {
-		/*
-		 * In snapshot mode ->data_size holds the new address of the
-		 * ring buffer's head.  The size itself is the whole address
-		 * range since we want the latest information.
-		 */
-		if (buf->snapshot)
-			handle->head = local_xchg(&buf->data_size,
-						  buf->nr_pages << PAGE_SHIFT);
-		/*
-		 * Tell the tracer PMU how much we got in this run and if
-		 * something went wrong along the way.  Nobody else can use
-		 * this cs_buffers instance until we are done.  As such
-		 * resetting parameters here and squaring off with the ring
-		 * buffer API in the tracer PMU is fine.
-		 */
-		size = local_xchg(&buf->data_size, 0);
-	}
-
-	return size;
-}
-
-static void tmc_update_etf_buffer(struct coresight_device *csdev,
+static unsigned long tmc_update_etf_buffer(struct coresight_device *csdev,
 				  struct perf_output_handle *handle,
 				  void *sink_config)
 {
@@ -387,17 +358,17 @@ static void tmc_update_etf_buffer(struct coresight_device *csdev,
 	const u32 *barrier;
 	u32 *buf_ptr;
 	u64 read_ptr, write_ptr;
-	u32 status, to_read;
-	unsigned long offset;
+	u32 status;
+	unsigned long offset, to_read;
 	struct cs_buffers *buf = sink_config;
 	struct tmc_drvdata *drvdata = dev_get_drvdata(csdev->dev.parent);
 
 	if (!buf)
-		return;
+		return 0;
 
 	/* This shouldn't happen */
 	if (WARN_ON_ONCE(drvdata->mode != CS_MODE_PERF))
-		return;
+		return 0;
 
 	CS_UNLOCK(drvdata->base);
 
@@ -486,18 +457,14 @@ static void tmc_update_etf_buffer(struct coresight_device *csdev,
 		}
 	}
 
-	/*
-	 * In snapshot mode all we have to do is communicate to
-	 * perf_aux_output_end() the address of the current head.  In full
-	 * trace mode the same function expects a size to move rb->aux_head
-	 * forward.
-	 */
-	if (buf->snapshot)
-		local_set(&buf->data_size, (cur * PAGE_SIZE) + offset);
-	else
-		local_add(to_read, &buf->data_size);
-
+	/* In snapshot mode we have to update the head */
+	if (buf->snapshot) {
+		handle->head = (cur * PAGE_SIZE) + offset;
+		to_read = buf->nr_pages << PAGE_SHIFT;
+	}
 	CS_LOCK(drvdata->base);
+
+	return to_read;
 }
 
 static const struct coresight_ops_sink tmc_etf_sink_ops = {
@@ -506,7 +473,6 @@ static const struct coresight_ops_sink tmc_etf_sink_ops = {
 	.alloc_buffer	= tmc_alloc_etf_buffer,
 	.free_buffer	= tmc_free_etf_buffer,
 	.set_buffer	= tmc_set_etf_buffer,
-	.reset_buffer	= tmc_reset_etf_buffer,
 	.update_buffer	= tmc_update_etf_buffer,
 };
 
diff --git a/include/linux/coresight.h b/include/linux/coresight.h
index d828a6e..eafe4d1 100644
--- a/include/linux/coresight.h
+++ b/include/linux/coresight.h
@@ -191,7 +191,6 @@ struct coresight_device {
  * @alloc_buffer:	initialises perf's ring buffer for trace collection.
  * @free_buffer:	release memory allocated in @get_config.
  * @set_buffer:		initialises buffer mechanic before a trace session.
- * @reset_buffer:	finalises buffer mechanic after a trace session.
  * @update_buffer:	update buffer pointers after a trace session.
  */
 struct coresight_ops_sink {
@@ -203,10 +202,7 @@ struct coresight_ops_sink {
 	int (*set_buffer)(struct coresight_device *csdev,
 			  struct perf_output_handle *handle,
 			  void *sink_config);
-	unsigned long (*reset_buffer)(struct coresight_device *csdev,
-				      struct perf_output_handle *handle,
-				      void *sink_config);
-	void (*update_buffer)(struct coresight_device *csdev,
+	unsigned long (*update_buffer)(struct coresight_device *csdev,
 			      struct perf_output_handle *handle,
 			      void *sink_config);
 };
-- 
2.7.4


  parent reply	other threads:[~2018-07-17 17:12 UTC|newest]

Thread overview: 22+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-07-17 17:11 [PATCH v2 00/10] coresight: perf: Support for tmc-etr backed buffers Suzuki K Poulose
2018-07-17 17:11 ` [PATCH v2 01/10] coresight: Fix handling of sinks Suzuki K Poulose
2018-07-17 17:11 ` [PATCH v2 02/10] coresight: perf: Fix per cpu path management Suzuki K Poulose
2018-07-17 17:11 ` [PATCH v2 03/10] coresight: perf: Disable trace path upon source error Suzuki K Poulose
2018-07-17 17:11 ` [PATCH v2 04/10] coresight: tmc-etr: Handle driver mode specific ETR buffers Suzuki K Poulose
2018-07-17 17:11 ` [PATCH v2 05/10] coresight: tmc-etr: Relax collection of trace from sysfs mode Suzuki K Poulose
2018-07-17 17:11 ` [PATCH v2 06/10] coresight: Convert driver messages to dev_dbg Suzuki K Poulose
2018-07-17 17:11 ` Suzuki K Poulose [this message]
2018-07-17 17:11 ` [PATCH v2 08/10] coresight: perf: Add helper to retrieve sink configuration Suzuki K Poulose
2018-07-19 20:07   ` Mathieu Poirier
2018-07-20  8:43     ` Suzuki K Poulose
2018-07-23 16:50       ` Mathieu Poirier
2018-07-17 17:11 ` [PATCH v2 09/10] coresight: perf: Remove set_buffer call back Suzuki K Poulose
2018-07-19 20:36   ` Mathieu Poirier
2018-07-20  9:04     ` Suzuki K Poulose
2018-07-23 18:22       ` Mathieu Poirier
2018-07-23 22:28         ` Suzuki K Poulose
2018-07-24 20:08           ` Mathieu Poirier
2018-07-25  9:51             ` Suzuki K Poulose
2018-07-17 17:11 ` [PATCH v2 10/10] coresight: etm-perf: Add support for ETR backend Suzuki K Poulose
2018-07-19 19:59   ` Mathieu Poirier
2018-07-20  9:07     ` Suzuki K Poulose

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1531847501-22226-8-git-send-email-suzuki.poulose@arm.com \
    --to=suzuki.poulose@arm.com \
    --cc=coresight@lists.linaro.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mathieu.poirier@linaro.org \
    --cc=mike.leach@linaro.org \
    --cc=robert.walker@arm.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).