linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Mark Brown <broonie@kernel.org>
To: Alexandre Belloni <alexandre.belloni@bootlin.com>
Cc: Mark Brown <broonie@kernel.org>, Mark Brown <broonie@kernel.org>,
	James Hogan <jhogan@kernel.org>,
	Paul Burton <paul.burton@mips.com>,
	linux-spi@vger.kernel.org, devicetree@vger.kernel.org,
	linux-kernel@vger.kernel.org, linux-mips@linux-mips.org,
	Thomas Petazzoni <thomas.petazzoni@bootlin.com>,
	Allan Nielsen <allan.nielsen@microsemi.com>,
	linux-spi@vger.kernel.org
Subject: Applied "spi: dw: allow providing own set_cs callback" to the spi tree
Date: Wed, 18 Jul 2018 13:29:50 +0100	[thread overview]
Message-ID: <E1fflaY-0007Wj-SM@debutante> (raw)
In-Reply-To: <20180717142314.32337-3-alexandre.belloni@bootlin.com>

The patch

   spi: dw: allow providing own set_cs callback

has been applied to the spi tree at

   https://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi.git 

All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.  

You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.

If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying
to this mail.

Thanks,
Mark

From 62dbbae483b6452e688b8e26c4d024d484117697 Mon Sep 17 00:00:00 2001
From: Alexandre Belloni <alexandre.belloni@bootlin.com>
Date: Tue, 17 Jul 2018 16:23:11 +0200
Subject: [PATCH] spi: dw: allow providing own set_cs callback

Allow platform specific drivers to provide their own set_cs callback when
the IP integration requires it.

Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
---
 drivers/spi/spi-dw.c | 3 +++
 drivers/spi/spi-dw.h | 1 +
 2 files changed, 4 insertions(+)

diff --git a/drivers/spi/spi-dw.c b/drivers/spi/spi-dw.c
index f693bfe95ab9..0d8ccb8be5ec 100644
--- a/drivers/spi/spi-dw.c
+++ b/drivers/spi/spi-dw.c
@@ -505,6 +505,9 @@ int dw_spi_add_host(struct device *dev, struct dw_spi *dws)
 	master->dev.of_node = dev->of_node;
 	master->flags = SPI_MASTER_GPIO_SS;
 
+	if (dws->set_cs)
+		master->set_cs = dws->set_cs;
+
 	/* Basic HW init */
 	spi_hw_init(dev, dws);
 
diff --git a/drivers/spi/spi-dw.h b/drivers/spi/spi-dw.h
index 2cde2473b3e9..446013022849 100644
--- a/drivers/spi/spi-dw.h
+++ b/drivers/spi/spi-dw.h
@@ -112,6 +112,7 @@ struct dw_spi {
 	u32			reg_io_width;	/* DR I/O width in bytes */
 	u16			bus_num;
 	u16			num_cs;		/* supported slave numbers */
+	void (*set_cs)(struct spi_device *spi, bool enable);
 
 	/* Current message transfer state info */
 	size_t			len;
-- 
2.18.0


  parent reply	other threads:[~2018-07-18 12:30 UTC|newest]

Thread overview: 18+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-07-17 14:23 [PATCH 0/5] Add support for MSCC Ocelot SPI Alexandre Belloni
2018-07-17 14:23 ` [PATCH 1/5] spi: dw: fix possible race condition Alexandre Belloni
2018-07-17 21:30   ` Andy Shevchenko
2018-07-17 21:30     ` Andy Shevchenko
2018-07-17 21:42       ` Alexandre Belloni
2018-07-17 21:54         ` Andy Shevchenko
2018-07-17 22:13           ` Alexandre Belloni
2018-07-18 10:33             ` Andy Shevchenko
2018-07-18 10:51   ` Mark Brown
2018-07-18 12:29   ` Applied "spi: dw: fix possible race condition" to the spi tree Mark Brown
2018-07-17 14:23 ` [PATCH 2/5] spi: dw: allow providing own set_cs callback Alexandre Belloni
2018-07-18 12:24   ` Mark Brown
2018-07-18 12:29   ` Mark Brown [this message]
2018-07-17 14:23 ` [PATCH 3/5] spi: dw-mmio: add MSCC Ocelot support Alexandre Belloni
2018-07-17 21:34   ` Andy Shevchenko
2018-07-17 21:40     ` Alexandre Belloni
2018-07-17 14:23 ` [PATCH 4/5] mips: dts: mscc: Add spi on Ocelot Alexandre Belloni
2018-07-17 14:23 ` [PATCH 5/5] mips: dts: mscc: enable spi and NOR flash support on ocelot PCB123 Alexandre Belloni

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=E1fflaY-0007Wj-SM@debutante \
    --to=broonie@kernel.org \
    --cc=alexandre.belloni@bootlin.com \
    --cc=allan.nielsen@microsemi.com \
    --cc=devicetree@vger.kernel.org \
    --cc=jhogan@kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mips@linux-mips.org \
    --cc=linux-spi@vger.kernel.org \
    --cc=paul.burton@mips.com \
    --cc=thomas.petazzoni@bootlin.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).