From: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
To: vkoul@kernel.org, dan.j.williams@intel.com, afaerber@suse.de,
robh+dt@kernel.org
Cc: dmaengine@vger.kernel.org, liuwei@actions-semi.com,
96boards@ucrobotics.com, devicetree@vger.kernel.org,
daniel.thompson@linaro.org, amit.kucheria@linaro.org,
linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org, hzhang@ucrobotics.com,
bdong@ucrobotics.com, manivannanece23@gmail.com,
thomas.liau@actions-semi.com, jeff.chen@actions-semi.com,
pn@denx.de, edgar.righi@lsitec.org.br,
Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Subject: [PATCH v2 1/4] dt-bindings: dma: Add binding for Actions Semi Owl SoCs
Date: Mon, 23 Jul 2018 09:47:40 +0530 [thread overview]
Message-ID: <20180723041743.32024-2-manivannan.sadhasivam@linaro.org> (raw)
In-Reply-To: <20180723041743.32024-1-manivannan.sadhasivam@linaro.org>
Add devicetree binding for Actions Semi Owl SoCs DMA controller.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
---
.../devicetree/bindings/dma/owl-dma.txt | 46 +++++++++++++++++++
1 file changed, 46 insertions(+)
create mode 100644 Documentation/devicetree/bindings/dma/owl-dma.txt
diff --git a/Documentation/devicetree/bindings/dma/owl-dma.txt b/Documentation/devicetree/bindings/dma/owl-dma.txt
new file mode 100644
index 000000000000..dd6ce237b216
--- /dev/null
+++ b/Documentation/devicetree/bindings/dma/owl-dma.txt
@@ -0,0 +1,46 @@
+* Actions Semi Owl SoCs DMA controller
+
+This binding follows the generic DMA bindings defined in dma.txt.
+
+Required properties:
+- compatible: Should be "actions,s900-dma".
+- reg: Should contain DMA registers location and length.
+- interrupts: Should contain 4 interrupts shared by all channel.
+- #dma-cells: Must be <1>. Used to represent the number of integer
+ cells in the dmas property of client device.
+- dma-channels: Physical channels supported.
+- dma-requests: Virtual channels supported.
+- clocks: Phandle and Specifier of the clock feeding the DMA controller.
+
+Example:
+
+Controller:
+ dma: dma-controller@e0260000 {
+ compatible = "actions,s900-dma";
+ reg = <0x0 0xe0260000 0x0 0x1000>;
+ interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
+ #dma-cells = <1>;
+ dma-channels = <12>;
+ dma-requests = <46>;
+ clocks = <&clock CLK_DMAC>;
+ };
+
+Client:
+
+DMA clients connected to the Actions Semi Owl SoCs DMA controller must
+use the format described in the dma.txt file, using a two-cell specifier
+for each channel.
+
+The two cells in order are:
+1. A phandle pointing to the DMA controller.
+2. The channel id.
+
+uart5: serial@e012a000 {
+ ...
+ dma-names = "tx", "rx";
+ dmas = <&dma 26>, <&dma 27>;
+ ...
+};
--
2.17.1
next prev parent reply other threads:[~2018-07-23 4:18 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-07-23 4:17 [PATCH v2 0/4] Add Actions Semi Owl family S900 DMA Controller support Manivannan Sadhasivam
2018-07-23 4:17 ` Manivannan Sadhasivam [this message]
2018-07-24 12:16 ` [PATCH v2 1/4] dt-bindings: dma: Add binding for Actions Semi Owl SoCs Vinod
2018-07-24 12:19 ` Andreas Färber
2018-07-24 13:08 ` Vinod
2018-07-25 15:23 ` Manivannan Sadhasivam
2018-07-23 4:17 ` [PATCH v2 2/4] arm64: dts: actions: Add Actions Semi S900 DMA Controller Manivannan Sadhasivam
2018-07-23 4:17 ` [PATCH v2 3/4] dma: Add Actions Semi Owl family S900 DMA driver Manivannan Sadhasivam
[not found] ` <20180724124614.GB2587@vkoul-mobl>
2018-07-24 13:09 ` Vinod
2018-07-26 4:52 ` Manivannan Sadhasivam
2018-07-23 4:17 ` [PATCH v2 4/4] MAINTAINERS: Add entry for Actions Semi Owl SoCs " Manivannan Sadhasivam
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180723041743.32024-2-manivannan.sadhasivam@linaro.org \
--to=manivannan.sadhasivam@linaro.org \
--cc=96boards@ucrobotics.com \
--cc=afaerber@suse.de \
--cc=amit.kucheria@linaro.org \
--cc=bdong@ucrobotics.com \
--cc=dan.j.williams@intel.com \
--cc=daniel.thompson@linaro.org \
--cc=devicetree@vger.kernel.org \
--cc=dmaengine@vger.kernel.org \
--cc=edgar.righi@lsitec.org.br \
--cc=hzhang@ucrobotics.com \
--cc=jeff.chen@actions-semi.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=liuwei@actions-semi.com \
--cc=manivannanece23@gmail.com \
--cc=pn@denx.de \
--cc=robh+dt@kernel.org \
--cc=thomas.liau@actions-semi.com \
--cc=vkoul@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).