[v4,2/2] mmc: host: iproc: Add ACPI support to IPROC SDHCI
diff mbox series

Message ID 1533455572-22012-3-git-send-email-srinath.mannam@broadcom.com
State New, archived
Headers show
Series
  • Add ACPI support to IPROC SDHCI
Related show

Commit Message

Srinath Mannam Aug. 5, 2018, 7:52 a.m. UTC
Add ACPI support to all IPROC SDHCI varients

Signed-off-by: Srinath Mannam <srinath.mannam@broadcom.com>
Reviewed-by: Ray Jui <ray.jui@broadcom.com>
Reviewed-by: Scott Branden <scott.branden@broadcom.com>
Reviewed-by: Vladimir Olovyannikov <vladimir.olovyannikov@broadcom.com>
---
 drivers/mmc/host/Kconfig       |  1 +
 drivers/mmc/host/sdhci-iproc.c | 59 ++++++++++++++++++++++++++++--------------
 2 files changed, 41 insertions(+), 19 deletions(-)

Comments

Adrian Hunter Aug. 6, 2018, 6:43 a.m. UTC | #1
Acked-by: Adrian Hunter <adrian.hunter@intel.com>

> -----Original Message-----
> From: Srinath Mannam [mailto:srinath.mannam@broadcom.com]
> Sent: Sunday, August 5, 2018 10:53 AM
> To: Ulf Hansson <ulf.hansson@linaro.org>; Hunter, Adrian
> <adrian.hunter@intel.com>; Ray Jui <rjui@broadcom.com>; Scott Branden
> <sbranden@broadcom.com>; vikram.prakash@broadcom.com
> Cc: bcm-kernel-feedback-list@broadcom.com; linux-mmc@vger.kernel.org;
> linux-kernel@vger.kernel.org; Srinath Mannam
> <srinath.mannam@broadcom.com>
> Subject: [PATCH v4 2/2] mmc: host: iproc: Add ACPI support to IPROC SDHCI
> 
> Add ACPI support to all IPROC SDHCI varients
> 
> Signed-off-by: Srinath Mannam <srinath.mannam@broadcom.com>
> Reviewed-by: Ray Jui <ray.jui@broadcom.com>
> Reviewed-by: Scott Branden <scott.branden@broadcom.com>
> Reviewed-by: Vladimir Olovyannikov
> <vladimir.olovyannikov@broadcom.com>
> ---
>  drivers/mmc/host/Kconfig       |  1 +
>  drivers/mmc/host/sdhci-iproc.c | 59 ++++++++++++++++++++++++++++----
> ----------
>  2 files changed, 41 insertions(+), 19 deletions(-)
> 
> diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig index
> 0581c19..bc6702e 100644
> --- a/drivers/mmc/host/Kconfig
> +++ b/drivers/mmc/host/Kconfig
> @@ -334,6 +334,7 @@ config MMC_SDHCI_IPROC
>  	tristate "SDHCI support for the BCM2835 & iProc SD/MMC Controller"
>  	depends on ARCH_BCM2835 || ARCH_BCM_IPROC ||
> COMPILE_TEST
>  	depends on MMC_SDHCI_PLTFM
> +	depends on OF || ACPI
>  	default ARCH_BCM_IPROC
>  	select MMC_SDHCI_IO_ACCESSORS
>  	help
> diff --git a/drivers/mmc/host/sdhci-iproc.c b/drivers/mmc/host/sdhci-iproc.c
> index d0e83db..0db9905 100644
> --- a/drivers/mmc/host/sdhci-iproc.c
> +++ b/drivers/mmc/host/sdhci-iproc.c
> @@ -15,6 +15,7 @@
>   * iProc SDHCI platform driver
>   */
> 
> +#include <linux/acpi.h>
>  #include <linux/delay.h>
>  #include <linux/module.h>
>  #include <linux/mmc/host.h>
> @@ -162,9 +163,19 @@ static void sdhci_iproc_writeb(struct sdhci_host
> *host, u8 val, int reg)
>  	sdhci_iproc_writel(host, newval, reg & ~3);  }
> 
> +static unsigned int sdhci_iproc_get_max_clock(struct sdhci_host *host)
> +{
> +	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
> +
> +	if (pltfm_host->clk)
> +		return sdhci_pltfm_clk_get_max_clock(host);
> +	else
> +		return pltfm_host->clock;
> +}
> +
>  static const struct sdhci_ops sdhci_iproc_ops = {
>  	.set_clock = sdhci_set_clock,
> -	.get_max_clock = sdhci_pltfm_clk_get_max_clock,
> +	.get_max_clock = sdhci_iproc_get_max_clock,
>  	.set_bus_width = sdhci_set_bus_width,
>  	.reset = sdhci_reset,
>  	.set_uhs_signaling = sdhci_set_uhs_signaling, @@ -178,7 +189,7 @@
> static const struct sdhci_ops sdhci_iproc_32only_ops = {
>  	.write_w = sdhci_iproc_writew,
>  	.write_b = sdhci_iproc_writeb,
>  	.set_clock = sdhci_set_clock,
> -	.get_max_clock = sdhci_pltfm_clk_get_max_clock,
> +	.get_max_clock = sdhci_iproc_get_max_clock,
>  	.set_bus_width = sdhci_set_bus_width,
>  	.reset = sdhci_reset,
>  	.set_uhs_signaling = sdhci_set_uhs_signaling, @@ -256,19 +267,25
> @@ static const struct of_device_id sdhci_iproc_of_match[] = {  };
> MODULE_DEVICE_TABLE(of, sdhci_iproc_of_match);
> 
> +static const struct acpi_device_id sdhci_iproc_acpi_ids[] = {
> +	{ .id = "BRCM5871", .driver_data =
> (kernel_ulong_t)&iproc_cygnus_data },
> +	{ .id = "BRCM5872", .driver_data = (kernel_ulong_t)&iproc_data },
> +	{ /* sentinel */ }
> +};
> +MODULE_DEVICE_TABLE(acpi, sdhci_iproc_acpi_ids);
> +
>  static int sdhci_iproc_probe(struct platform_device *pdev)  {
> -	const struct of_device_id *match;
> -	const struct sdhci_iproc_data *iproc_data;
> +	struct device *dev = &pdev->dev;
> +	const struct sdhci_iproc_data *iproc_data = NULL;
>  	struct sdhci_host *host;
>  	struct sdhci_iproc_host *iproc_host;
>  	struct sdhci_pltfm_host *pltfm_host;
>  	int ret;
> 
> -	match = of_match_device(sdhci_iproc_of_match, &pdev->dev);
> -	if (!match)
> -		return -EINVAL;
> -	iproc_data = match->data;
> +	iproc_data = device_get_match_data(dev);
> +	if (!iproc_data)
> +		return -ENODEV;
> 
>  	host = sdhci_pltfm_init(pdev, iproc_data->pdata,
> sizeof(*iproc_host));
>  	if (IS_ERR(host))
> @@ -280,19 +297,21 @@ static int sdhci_iproc_probe(struct platform_device
> *pdev)
>  	iproc_host->data = iproc_data;
> 
>  	mmc_of_parse(host->mmc);
> -	sdhci_get_of_property(pdev);
> +	sdhci_get_property(pdev);
> 
>  	host->mmc->caps |= iproc_host->data->mmc_caps;
> 
> -	pltfm_host->clk = devm_clk_get(&pdev->dev, NULL);
> -	if (IS_ERR(pltfm_host->clk)) {
> -		ret = PTR_ERR(pltfm_host->clk);
> -		goto err;
> -	}
> -	ret = clk_prepare_enable(pltfm_host->clk);
> -	if (ret) {
> -		dev_err(&pdev->dev, "failed to enable host clk\n");
> -		goto err;
> +	if (dev->of_node) {
> +		pltfm_host->clk = devm_clk_get(dev, NULL);
> +		if (IS_ERR(pltfm_host->clk)) {
> +			ret = PTR_ERR(pltfm_host->clk);
> +			goto err;
> +		}
> +		ret = clk_prepare_enable(pltfm_host->clk);
> +		if (ret) {
> +			dev_err(dev, "failed to enable host clk\n");
> +			goto err;
> +		}
>  	}
> 
>  	if (iproc_host->data->pdata->quirks &
> SDHCI_QUIRK_MISSING_CAPS) { @@ -307,7 +326,8 @@ static int
> sdhci_iproc_probe(struct platform_device *pdev)
>  	return 0;
> 
>  err_clk:
> -	clk_disable_unprepare(pltfm_host->clk);
> +	if (dev->of_node)
> +		clk_disable_unprepare(pltfm_host->clk);
>  err:
>  	sdhci_pltfm_free(pdev);
>  	return ret;
> @@ -317,6 +337,7 @@ static struct platform_driver sdhci_iproc_driver = {
>  	.driver = {
>  		.name = "sdhci-iproc",
>  		.of_match_table = sdhci_iproc_of_match,
> +		.acpi_match_table = ACPI_PTR(sdhci_iproc_acpi_ids),
>  		.pm = &sdhci_pltfm_pmops,
>  	},
>  	.probe = sdhci_iproc_probe,
> --
> 2.7.4
Srinath Mannam Aug. 14, 2018, 12:43 p.m. UTC | #2
Hi Ulf Hansson,

Please kindly provide your inputs.

Regards,
Srinath.

On Mon, Aug 6, 2018 at 12:13 PM, Hunter, Adrian <adrian.hunter@intel.com> wrote:
> Acked-by: Adrian Hunter <adrian.hunter@intel.com>
>
>> -----Original Message-----
>> From: Srinath Mannam [mailto:srinath.mannam@broadcom.com]
>> Sent: Sunday, August 5, 2018 10:53 AM
>> To: Ulf Hansson <ulf.hansson@linaro.org>; Hunter, Adrian
>> <adrian.hunter@intel.com>; Ray Jui <rjui@broadcom.com>; Scott Branden
>> <sbranden@broadcom.com>; vikram.prakash@broadcom.com
>> Cc: bcm-kernel-feedback-list@broadcom.com; linux-mmc@vger.kernel.org;
>> linux-kernel@vger.kernel.org; Srinath Mannam
>> <srinath.mannam@broadcom.com>
>> Subject: [PATCH v4 2/2] mmc: host: iproc: Add ACPI support to IPROC SDHCI
>>
>> Add ACPI support to all IPROC SDHCI varients
>>
>> Signed-off-by: Srinath Mannam <srinath.mannam@broadcom.com>
>> Reviewed-by: Ray Jui <ray.jui@broadcom.com>
>> Reviewed-by: Scott Branden <scott.branden@broadcom.com>
>> Reviewed-by: Vladimir Olovyannikov
>> <vladimir.olovyannikov@broadcom.com>
>> ---
>>  drivers/mmc/host/Kconfig       |  1 +
>>  drivers/mmc/host/sdhci-iproc.c | 59 ++++++++++++++++++++++++++++----
>> ----------
>>  2 files changed, 41 insertions(+), 19 deletions(-)
>>
>> diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig index
>> 0581c19..bc6702e 100644
>> --- a/drivers/mmc/host/Kconfig
>> +++ b/drivers/mmc/host/Kconfig
>> @@ -334,6 +334,7 @@ config MMC_SDHCI_IPROC
>>       tristate "SDHCI support for the BCM2835 & iProc SD/MMC Controller"
>>       depends on ARCH_BCM2835 || ARCH_BCM_IPROC ||
>> COMPILE_TEST
>>       depends on MMC_SDHCI_PLTFM
>> +     depends on OF || ACPI
>>       default ARCH_BCM_IPROC
>>       select MMC_SDHCI_IO_ACCESSORS
>>       help
>> diff --git a/drivers/mmc/host/sdhci-iproc.c b/drivers/mmc/host/sdhci-iproc.c
>> index d0e83db..0db9905 100644
>> --- a/drivers/mmc/host/sdhci-iproc.c
>> +++ b/drivers/mmc/host/sdhci-iproc.c
>> @@ -15,6 +15,7 @@
>>   * iProc SDHCI platform driver
>>   */
>>
>> +#include <linux/acpi.h>
>>  #include <linux/delay.h>
>>  #include <linux/module.h>
>>  #include <linux/mmc/host.h>
>> @@ -162,9 +163,19 @@ static void sdhci_iproc_writeb(struct sdhci_host
>> *host, u8 val, int reg)
>>       sdhci_iproc_writel(host, newval, reg & ~3);  }
>>
>> +static unsigned int sdhci_iproc_get_max_clock(struct sdhci_host *host)
>> +{
>> +     struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
>> +
>> +     if (pltfm_host->clk)
>> +             return sdhci_pltfm_clk_get_max_clock(host);
>> +     else
>> +             return pltfm_host->clock;
>> +}
>> +
>>  static const struct sdhci_ops sdhci_iproc_ops = {
>>       .set_clock = sdhci_set_clock,
>> -     .get_max_clock = sdhci_pltfm_clk_get_max_clock,
>> +     .get_max_clock = sdhci_iproc_get_max_clock,
>>       .set_bus_width = sdhci_set_bus_width,
>>       .reset = sdhci_reset,
>>       .set_uhs_signaling = sdhci_set_uhs_signaling, @@ -178,7 +189,7 @@
>> static const struct sdhci_ops sdhci_iproc_32only_ops = {
>>       .write_w = sdhci_iproc_writew,
>>       .write_b = sdhci_iproc_writeb,
>>       .set_clock = sdhci_set_clock,
>> -     .get_max_clock = sdhci_pltfm_clk_get_max_clock,
>> +     .get_max_clock = sdhci_iproc_get_max_clock,
>>       .set_bus_width = sdhci_set_bus_width,
>>       .reset = sdhci_reset,
>>       .set_uhs_signaling = sdhci_set_uhs_signaling, @@ -256,19 +267,25
>> @@ static const struct of_device_id sdhci_iproc_of_match[] = {  };
>> MODULE_DEVICE_TABLE(of, sdhci_iproc_of_match);
>>
>> +static const struct acpi_device_id sdhci_iproc_acpi_ids[] = {
>> +     { .id = "BRCM5871", .driver_data =
>> (kernel_ulong_t)&iproc_cygnus_data },
>> +     { .id = "BRCM5872", .driver_data = (kernel_ulong_t)&iproc_data },
>> +     { /* sentinel */ }
>> +};
>> +MODULE_DEVICE_TABLE(acpi, sdhci_iproc_acpi_ids);
>> +
>>  static int sdhci_iproc_probe(struct platform_device *pdev)  {
>> -     const struct of_device_id *match;
>> -     const struct sdhci_iproc_data *iproc_data;
>> +     struct device *dev = &pdev->dev;
>> +     const struct sdhci_iproc_data *iproc_data = NULL;
>>       struct sdhci_host *host;
>>       struct sdhci_iproc_host *iproc_host;
>>       struct sdhci_pltfm_host *pltfm_host;
>>       int ret;
>>
>> -     match = of_match_device(sdhci_iproc_of_match, &pdev->dev);
>> -     if (!match)
>> -             return -EINVAL;
>> -     iproc_data = match->data;
>> +     iproc_data = device_get_match_data(dev);
>> +     if (!iproc_data)
>> +             return -ENODEV;
>>
>>       host = sdhci_pltfm_init(pdev, iproc_data->pdata,
>> sizeof(*iproc_host));
>>       if (IS_ERR(host))
>> @@ -280,19 +297,21 @@ static int sdhci_iproc_probe(struct platform_device
>> *pdev)
>>       iproc_host->data = iproc_data;
>>
>>       mmc_of_parse(host->mmc);
>> -     sdhci_get_of_property(pdev);
>> +     sdhci_get_property(pdev);
>>
>>       host->mmc->caps |= iproc_host->data->mmc_caps;
>>
>> -     pltfm_host->clk = devm_clk_get(&pdev->dev, NULL);
>> -     if (IS_ERR(pltfm_host->clk)) {
>> -             ret = PTR_ERR(pltfm_host->clk);
>> -             goto err;
>> -     }
>> -     ret = clk_prepare_enable(pltfm_host->clk);
>> -     if (ret) {
>> -             dev_err(&pdev->dev, "failed to enable host clk\n");
>> -             goto err;
>> +     if (dev->of_node) {
>> +             pltfm_host->clk = devm_clk_get(dev, NULL);
>> +             if (IS_ERR(pltfm_host->clk)) {
>> +                     ret = PTR_ERR(pltfm_host->clk);
>> +                     goto err;
>> +             }
>> +             ret = clk_prepare_enable(pltfm_host->clk);
>> +             if (ret) {
>> +                     dev_err(dev, "failed to enable host clk\n");
>> +                     goto err;
>> +             }
>>       }
>>
>>       if (iproc_host->data->pdata->quirks &
>> SDHCI_QUIRK_MISSING_CAPS) { @@ -307,7 +326,8 @@ static int
>> sdhci_iproc_probe(struct platform_device *pdev)
>>       return 0;
>>
>>  err_clk:
>> -     clk_disable_unprepare(pltfm_host->clk);
>> +     if (dev->of_node)
>> +             clk_disable_unprepare(pltfm_host->clk);
>>  err:
>>       sdhci_pltfm_free(pdev);
>>       return ret;
>> @@ -317,6 +337,7 @@ static struct platform_driver sdhci_iproc_driver = {
>>       .driver = {
>>               .name = "sdhci-iproc",
>>               .of_match_table = sdhci_iproc_of_match,
>> +             .acpi_match_table = ACPI_PTR(sdhci_iproc_acpi_ids),
>>               .pm = &sdhci_pltfm_pmops,
>>       },
>>       .probe = sdhci_iproc_probe,
>> --
>> 2.7.4
>

Patch
diff mbox series

diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig
index 0581c19..bc6702e 100644
--- a/drivers/mmc/host/Kconfig
+++ b/drivers/mmc/host/Kconfig
@@ -334,6 +334,7 @@  config MMC_SDHCI_IPROC
 	tristate "SDHCI support for the BCM2835 & iProc SD/MMC Controller"
 	depends on ARCH_BCM2835 || ARCH_BCM_IPROC || COMPILE_TEST
 	depends on MMC_SDHCI_PLTFM
+	depends on OF || ACPI
 	default ARCH_BCM_IPROC
 	select MMC_SDHCI_IO_ACCESSORS
 	help
diff --git a/drivers/mmc/host/sdhci-iproc.c b/drivers/mmc/host/sdhci-iproc.c
index d0e83db..0db9905 100644
--- a/drivers/mmc/host/sdhci-iproc.c
+++ b/drivers/mmc/host/sdhci-iproc.c
@@ -15,6 +15,7 @@ 
  * iProc SDHCI platform driver
  */
 
+#include <linux/acpi.h>
 #include <linux/delay.h>
 #include <linux/module.h>
 #include <linux/mmc/host.h>
@@ -162,9 +163,19 @@  static void sdhci_iproc_writeb(struct sdhci_host *host, u8 val, int reg)
 	sdhci_iproc_writel(host, newval, reg & ~3);
 }
 
+static unsigned int sdhci_iproc_get_max_clock(struct sdhci_host *host)
+{
+	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+
+	if (pltfm_host->clk)
+		return sdhci_pltfm_clk_get_max_clock(host);
+	else
+		return pltfm_host->clock;
+}
+
 static const struct sdhci_ops sdhci_iproc_ops = {
 	.set_clock = sdhci_set_clock,
-	.get_max_clock = sdhci_pltfm_clk_get_max_clock,
+	.get_max_clock = sdhci_iproc_get_max_clock,
 	.set_bus_width = sdhci_set_bus_width,
 	.reset = sdhci_reset,
 	.set_uhs_signaling = sdhci_set_uhs_signaling,
@@ -178,7 +189,7 @@  static const struct sdhci_ops sdhci_iproc_32only_ops = {
 	.write_w = sdhci_iproc_writew,
 	.write_b = sdhci_iproc_writeb,
 	.set_clock = sdhci_set_clock,
-	.get_max_clock = sdhci_pltfm_clk_get_max_clock,
+	.get_max_clock = sdhci_iproc_get_max_clock,
 	.set_bus_width = sdhci_set_bus_width,
 	.reset = sdhci_reset,
 	.set_uhs_signaling = sdhci_set_uhs_signaling,
@@ -256,19 +267,25 @@  static const struct of_device_id sdhci_iproc_of_match[] = {
 };
 MODULE_DEVICE_TABLE(of, sdhci_iproc_of_match);
 
+static const struct acpi_device_id sdhci_iproc_acpi_ids[] = {
+	{ .id = "BRCM5871", .driver_data = (kernel_ulong_t)&iproc_cygnus_data },
+	{ .id = "BRCM5872", .driver_data = (kernel_ulong_t)&iproc_data },
+	{ /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(acpi, sdhci_iproc_acpi_ids);
+
 static int sdhci_iproc_probe(struct platform_device *pdev)
 {
-	const struct of_device_id *match;
-	const struct sdhci_iproc_data *iproc_data;
+	struct device *dev = &pdev->dev;
+	const struct sdhci_iproc_data *iproc_data = NULL;
 	struct sdhci_host *host;
 	struct sdhci_iproc_host *iproc_host;
 	struct sdhci_pltfm_host *pltfm_host;
 	int ret;
 
-	match = of_match_device(sdhci_iproc_of_match, &pdev->dev);
-	if (!match)
-		return -EINVAL;
-	iproc_data = match->data;
+	iproc_data = device_get_match_data(dev);
+	if (!iproc_data)
+		return -ENODEV;
 
 	host = sdhci_pltfm_init(pdev, iproc_data->pdata, sizeof(*iproc_host));
 	if (IS_ERR(host))
@@ -280,19 +297,21 @@  static int sdhci_iproc_probe(struct platform_device *pdev)
 	iproc_host->data = iproc_data;
 
 	mmc_of_parse(host->mmc);
-	sdhci_get_of_property(pdev);
+	sdhci_get_property(pdev);
 
 	host->mmc->caps |= iproc_host->data->mmc_caps;
 
-	pltfm_host->clk = devm_clk_get(&pdev->dev, NULL);
-	if (IS_ERR(pltfm_host->clk)) {
-		ret = PTR_ERR(pltfm_host->clk);
-		goto err;
-	}
-	ret = clk_prepare_enable(pltfm_host->clk);
-	if (ret) {
-		dev_err(&pdev->dev, "failed to enable host clk\n");
-		goto err;
+	if (dev->of_node) {
+		pltfm_host->clk = devm_clk_get(dev, NULL);
+		if (IS_ERR(pltfm_host->clk)) {
+			ret = PTR_ERR(pltfm_host->clk);
+			goto err;
+		}
+		ret = clk_prepare_enable(pltfm_host->clk);
+		if (ret) {
+			dev_err(dev, "failed to enable host clk\n");
+			goto err;
+		}
 	}
 
 	if (iproc_host->data->pdata->quirks & SDHCI_QUIRK_MISSING_CAPS) {
@@ -307,7 +326,8 @@  static int sdhci_iproc_probe(struct platform_device *pdev)
 	return 0;
 
 err_clk:
-	clk_disable_unprepare(pltfm_host->clk);
+	if (dev->of_node)
+		clk_disable_unprepare(pltfm_host->clk);
 err:
 	sdhci_pltfm_free(pdev);
 	return ret;
@@ -317,6 +337,7 @@  static struct platform_driver sdhci_iproc_driver = {
 	.driver = {
 		.name = "sdhci-iproc",
 		.of_match_table = sdhci_iproc_of_match,
+		.acpi_match_table = ACPI_PTR(sdhci_iproc_acpi_ids),
 		.pm = &sdhci_pltfm_pmops,
 	},
 	.probe = sdhci_iproc_probe,