From: Codrin Ciubotariu <codrin.ciubotariu@microchip.com>
To: <alexandre.belloni@bootlin.com>, <nicolas.ferre@microchip.com>,
<Claudiu.Beznea@microchip.com>
Cc: <devicetree@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
<linux-arm-kernel@lists.infradead.org>,
<Cristian.Birsan@microchip.com>,
Cyrille Pitchen <cyrille.pitchen@atmel.com>
Subject: [PATCH v7 2/3] ARM: dts: at91: sama5d2: add nodes for I2S controllers
Date: Mon, 6 Aug 2018 14:19:47 +0300 [thread overview]
Message-ID: <20180806111948.4522-3-codrin.ciubotariu@microchip.com> (raw)
In-Reply-To: <20180806111948.4522-1-codrin.ciubotariu@microchip.com>
From: Cyrille Pitchen <cyrille.pitchen@atmel.com>
This patch adds DT nodes for I2S0 and I2S1. It also adds an alias for
each I2S node.
Signed-off-by: Cyrille Pitchen <cyrille.pitchen@atmel.com>
[codrin.ciubotariu@microchip.com: removed unnecessary clock phandles]
Signed-off-by: Codrin Ciubotariu <codrin.ciubotariu@microchip.com>
---
Changes in v7:
- none
Changes in v6:
- removed unnecessary phandles to audio PLL clock from the I2S nodes;
- using assigned clocks to set gclk as parent of i2smuxclk;
arch/arm/boot/dts/sama5d2.dtsi | 38 ++++++++++++++++++++++++++++++++++
1 file changed, 38 insertions(+)
diff --git a/arch/arm/boot/dts/sama5d2.dtsi b/arch/arm/boot/dts/sama5d2.dtsi
index eeb6afa1cda7..bf71dc00223a 100644
--- a/arch/arm/boot/dts/sama5d2.dtsi
+++ b/arch/arm/boot/dts/sama5d2.dtsi
@@ -58,6 +58,8 @@
serial1 = &uart3;
tcb0 = &tcb0;
tcb1 = &tcb1;
+ i2s0 = &i2s0;
+ i2s1 = &i2s1;
};
cpus {
@@ -1313,6 +1315,24 @@
clocks = <&clk32k>;
};
+ i2s0: i2s@f8050000 {
+ compatible = "atmel,sama5d2-i2s";
+ reg = <0xf8050000 0x100>;
+ interrupts = <54 IRQ_TYPE_LEVEL_HIGH 7>;
+ dmas = <&dma0
+ (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+ AT91_XDMAC_DT_PERID(31))>,
+ <&dma0
+ (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+ AT91_XDMAC_DT_PERID(32))>;
+ dma-names = "tx", "rx";
+ clocks = <&i2s0_clk>, <&i2s0_gclk>;
+ clock-names = "pclk", "gclk";
+ assigned-clocks = <&i2s0muxck>;
+ assigned-clock-parents = <&i2s0_gclk>;
+ status = "disabled";
+ };
+
can0: can@f8054000 {
compatible = "bosch,m_can";
reg = <0xf8054000 0x4000>, <0x210000 0x4000>;
@@ -1506,6 +1526,24 @@
status = "disabled";
};
+ i2s1: i2s@fc04c000 {
+ compatible = "atmel,sama5d2-i2s";
+ reg = <0xfc04c000 0x100>;
+ interrupts = <55 IRQ_TYPE_LEVEL_HIGH 7>;
+ dmas = <&dma0
+ (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+ AT91_XDMAC_DT_PERID(33))>,
+ <&dma0
+ (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+ AT91_XDMAC_DT_PERID(34))>;
+ dma-names = "tx", "rx";
+ clocks = <&i2s1_clk>, <&i2s1_gclk>;
+ clock-names = "pclk", "gclk";
+ assigned-clocks = <&i2s1muxck>;
+ assigned-parrents = <&i2s1_gclk>;
+ status = "disabled";
+ };
+
can1: can@fc050000 {
compatible = "bosch,m_can";
reg = <0xfc050000 0x4000>, <0x210000 0x4000>;
--
2.17.1
next prev parent reply other threads:[~2018-08-06 11:20 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-08-06 11:19 [PATCH v7 0/3] ARM: dts: at91: sama5d2: Add nodes for I2S Codrin Ciubotariu
2018-08-06 11:19 ` [PATCH v7 1/3] ARM: dts: at91: sama5d2: add I2S clock muxing nodes Codrin Ciubotariu
2018-08-06 11:19 ` Codrin Ciubotariu [this message]
2018-08-06 11:19 ` [PATCH v7 3/3] ARM: dts: at91: sama5d2 Xplained: add pin muxing for I2S Codrin Ciubotariu
2018-08-27 14:40 ` [PATCH v7 0/3] ARM: dts: at91: sama5d2: Add nodes " Alexandre Belloni
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180806111948.4522-3-codrin.ciubotariu@microchip.com \
--to=codrin.ciubotariu@microchip.com \
--cc=Claudiu.Beznea@microchip.com \
--cc=Cristian.Birsan@microchip.com \
--cc=alexandre.belloni@bootlin.com \
--cc=cyrille.pitchen@atmel.com \
--cc=devicetree@vger.kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=nicolas.ferre@microchip.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).