arm:pmsa-v8: remove some extra semicolon
diff mbox series

Message ID 1533824770-35931-1-git-send-email-zhongjiang@huawei.com
State Accepted
Commit 49f30235061bf5c5c201c5097061e34510bf110a
Headers show
Series
  • arm:pmsa-v8: remove some extra semicolon
Related show

Commit Message

zhong jiang Aug. 9, 2018, 2:26 p.m. UTC
There are some extra semicolon in pmsa-v8.c. So just remove them.
I detect the issue with the help of Coccinelle.

Signed-off-by: zhong jiang <zhongjiang@huawei.com>
---
 arch/arm/mm/pmsa-v8.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

Patch
diff mbox series

diff --git a/arch/arm/mm/pmsa-v8.c b/arch/arm/mm/pmsa-v8.c
index 617a83d..0d7d5fb 100644
--- a/arch/arm/mm/pmsa-v8.c
+++ b/arch/arm/mm/pmsa-v8.c
@@ -165,7 +165,7 @@  static int __init pmsav8_setup_ram(unsigned int number, phys_addr_t start,phys_a
 		return -EINVAL;
 
 	bar = start;
-	lar = (end - 1) & ~(PMSAv8_MINALIGN - 1);;
+	lar = (end - 1) & ~(PMSAv8_MINALIGN - 1);
 
 	bar |= PMSAv8_AP_PL1RW_PL0RW | PMSAv8_RGN_SHARED;
 	lar |= PMSAv8_LAR_IDX(PMSAv8_RGN_NORMAL) | PMSAv8_LAR_EN;
@@ -181,7 +181,7 @@  static int __init pmsav8_setup_io(unsigned int number, phys_addr_t start,phys_ad
 		return -EINVAL;
 
 	bar = start;
-	lar = (end - 1) & ~(PMSAv8_MINALIGN - 1);;
+	lar = (end - 1) & ~(PMSAv8_MINALIGN - 1);
 
 	bar |= PMSAv8_AP_PL1RW_PL0RW | PMSAv8_RGN_SHARED | PMSAv8_BAR_XN;
 	lar |= PMSAv8_LAR_IDX(PMSAv8_RGN_DEVICE_nGnRnE) | PMSAv8_LAR_EN;