[v3,2/9] dt-bindings: clock: Add reset controller bindings for Actions Semi Owl SoCs
diff mbox series

Message ID 20180810095113.25292-3-manivannan.sadhasivam@linaro.org
State New
Headers show
Series
  • Add Reset Controller support for Actions Semi Owl SoCs
Related show

Commit Message

Manivannan Sadhasivam Aug. 10, 2018, 9:51 a.m. UTC
Add Reset Controller bindings to clock bindings for Actions Semi Owl
SoCs, S700 and S900.

Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
---
 Documentation/devicetree/bindings/clock/actions,owl-cmu.txt | 2 ++
 1 file changed, 2 insertions(+)

Comments

Stephen Boyd Oct. 17, 2018, 6:02 a.m. UTC | #1
Quoting Manivannan Sadhasivam (2018-08-10 02:51:06)
> Add Reset Controller bindings to clock bindings for Actions Semi Owl
> SoCs, S700 and S900.
> 
> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
> Reviewed-by: Rob Herring <robh@kernel.org>
> ---

Applied to clk-next

Patch
diff mbox series

diff --git a/Documentation/devicetree/bindings/clock/actions,owl-cmu.txt b/Documentation/devicetree/bindings/clock/actions,owl-cmu.txt
index d1e60d297387..2ef86ae96df8 100644
--- a/Documentation/devicetree/bindings/clock/actions,owl-cmu.txt
+++ b/Documentation/devicetree/bindings/clock/actions,owl-cmu.txt
@@ -13,6 +13,7 @@  Required Properties:
   region.
 - clocks: Reference to the parent clocks ("hosc", "losc")
 - #clock-cells: should be 1.
+- #reset-cells: should be 1.
 
 Each clock is assigned an identifier, and client nodes can use this identifier
 to specify the clock which they consume.
@@ -36,6 +37,7 @@  Example: Clock Management Unit node:
                 reg = <0x0 0xe0160000 0x0 0x1000>;
                 clocks = <&hosc>, <&losc>;
                 #clock-cells = <1>;
+                #reset-cells = <1>;
         };
 
 Example: UART controller node that consumes clock generated by the clock