From: Lina Iyer <ilina@codeaurora.org>
To: marc.zyngier@arm.com, bjorn.andersson@linaro.org,
sboyd@kernel.org, evgreen@chromium.org, linus.walleij@linaro.org
Cc: rplsssn@codeaurora.org, linux-kernel@vger.kernel.org,
linux-arm-msm@vger.kernel.org, rnayak@codeaurora.org,
devicetree@vger.kernel.org, andy.gross@linaro.org,
dianders@chromium.org, Lina Iyer <ilina@codeaurora.org>
Subject: [PATCH v2 5/5] arm64: dts: qcom: add wake up interrupts for GPIOs for SDM845
Date: Fri, 17 Aug 2018 10:38:49 -0600 [thread overview]
Message-ID: <20180817163849.30750-6-ilina@codeaurora.org> (raw)
In-Reply-To: <20180817163849.30750-1-ilina@codeaurora.org>
GPIOs that are wakeup capable have interrupt lines that are routed to
the always-on interrupt controller (PDC) in parallel to the pinctrl. The
interrupts listed here are the wake up lines corresponding to GPIOs.
Signed-off-by: Lina Iyer <ilina@codeaurora.org>
---
Changes in v1:
- Use interrupt-extended for all TLMM interrupts
- Define GPIO-PDC map using interrupt-names
---
arch/arm64/boot/dts/qcom/sdm845.dtsi | 57 +++++++++++++++++++++++++++-
1 file changed, 56 insertions(+), 1 deletion(-)
diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi
index 87ffc32dc597..2379684373d3 100644
--- a/arch/arm64/boot/dts/qcom/sdm845.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi
@@ -712,11 +712,66 @@
tlmm: pinctrl@3400000 {
compatible = "qcom,sdm845-pinctrl";
reg = <0x03400000 0xc00000>;
- interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
+ interrupts-extended = <&intc GIC_SPI 208 0>,
+ <&pdc 510 0>, <&pdc 511 0>, <&pdc 512 0>,
+ <&pdc 513 0>, <&pdc 514 0>, <&pdc 515 0>,
+ <&pdc 516 0>, <&pdc 517 0>, <&pdc 518 0>,
+ <&pdc 519 0>, <&pdc 632 0>, <&pdc 639 0>,
+ <&pdc 521 0>, <&pdc 522 0>, <&pdc 523 0>,
+ <&pdc 524 0>, <&pdc 525 0>, <&pdc 526 0>,
+ <&pdc 527 0>, <&pdc 630 0>, <&pdc 637 0>,
+ <&pdc 529 0>, <&pdc 530 0>, <&pdc 531 0>,
+ <&pdc 532 0>, <&pdc 633 0>, <&pdc 640 0>,
+ <&pdc 534 0>, <&pdc 535 0>, <&pdc 536 0>,
+ <&pdc 537 0>, <&pdc 538 0>, <&pdc 539 0>,
+ <&pdc 540 0>, <&pdc 541 0>, <&pdc 542 0>,
+ <&pdc 543 0>, <&pdc 544 0>, <&pdc 545 0>,
+ <&pdc 546 0>, <&pdc 547 0>, <&pdc 548 0>,
+ <&pdc 549 0>, <&pdc 550 0>, <&pdc 551 0>,
+ <&pdc 552 0>, <&pdc 553 0>, <&pdc 554 0>,
+ <&pdc 555 0>, <&pdc 556 0>, <&pdc 557 0>,
+ <&pdc 631 0>, <&pdc 638 0>, <&pdc 559 0>,
+ <&pdc 560 0>, <&pdc 561 0>, <&pdc 562 0>,
+ <&pdc 563 0>, <&pdc 564 0>, <&pdc 565 0>,
+ <&pdc 566 0>, <&pdc 570 0>, <&pdc 571 0>,
+ <&pdc 572 0>, <&pdc 573 0>, <&pdc 609 0>,
+ <&pdc 610 0>, <&pdc 611 0>, <&pdc 612 0>,
+ <&pdc 613 0>, <&pdc 614 0>, <&pdc 615 0>,
+ <&pdc 617 0>, <&pdc 618 0>, <&pdc 619 0>,
+ <&pdc 620 0>, <&pdc 621 0>, <&pdc 622 0>,
+ <&pdc 623 0>;
+ interrupt-names = "summary-irq",
+ "gpio1", "gpio3", "gpio5",
+ "gpio10", "gpio11", "gpio20",
+ "gpio22", "gpio24", "gpio26",
+ "gpio30", "gpio31", "gpio31",
+ "gpio32", "gpio34", "gpio36",
+ "gpio37", "gpio38", "gpio39",
+ "gpio40", "gpio41", "gpio41",
+ "gpio43", "gpio44", "gpio46",
+ "gpio48", "gpio49", "gpio49",
+ "gpio52", "gpio53", "gpio54",
+ "gpio56", "gpio57", "gpio58",
+ "gpio59", "gpio60", "gpio61",
+ "gpio62", "gpio63", "gpio64",
+ "gpio66", "gpio68", "gpio71",
+ "gpio73", "gpio77", "gpio78",
+ "gpio79", "gpio80", "gpio84",
+ "gpio85", "gpio86", "gpio88",
+ "gpio89", "gpio89", "gpio91",
+ "gpio92", "gpio95", "gpio96",
+ "gpio97", "gpio101", "gpio103",
+ "gpio104", "gpio115", "gpio116",
+ "gpio117", "gpio118", "gpio119",
+ "gpio120", "gpio121", "gpio122",
+ "gpio123", "gpio124", "gpio125",
+ "gpio127", "gpio128", "gpio129",
+ "gpio130", "gpio132", "gpio133",
+ "gpio145";
qup_i2c0_default: qup-i2c0-default {
pinmux {
--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project
next prev parent reply other threads:[~2018-08-17 16:39 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-08-17 16:38 [PATCH v2 0/5] Wakeup GPIO support for SDM845 SoC Lina Iyer
2018-08-17 16:38 ` [PATCH v2 1/5] drivers: pinctrl: qcom: add wakeup capability to GPIO Lina Iyer
2018-08-21 6:08 ` Bjorn Andersson
2018-08-27 16:51 ` Lina Iyer
2018-08-26 14:33 ` Linus Walleij
2018-08-27 16:56 ` Lina Iyer
2018-08-28 0:26 ` Bjorn Andersson
2018-08-28 1:46 ` Lina Iyer
2018-08-28 3:20 ` Bjorn Andersson
2018-08-17 16:38 ` [PATCH v2 2/5] dt-bindings: pinctrl: add wakeup capable GPIOs for SDM845 Lina Iyer
2018-08-17 16:38 ` [PATCH v2 3/5] drivers: pinctrl: msm: enable PDC interrupt only during suspend Lina Iyer
2018-08-17 16:38 ` [PATCH v2 4/5] drivers: pinctrl: qcom: sdm845: support GPIO wakeup from suspend Lina Iyer
2018-08-17 16:38 ` Lina Iyer [this message]
2018-08-17 19:31 ` [PATCH v2 0/5] Wakeup GPIO support for SDM845 SoC Lina Iyer
2018-08-24 20:01 Lina Iyer
2018-08-24 20:01 ` [PATCH v2 5/5] arm64: dts: qcom: add wake up interrupts for GPIOs for SDM845 Lina Iyer
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180817163849.30750-6-ilina@codeaurora.org \
--to=ilina@codeaurora.org \
--cc=andy.gross@linaro.org \
--cc=bjorn.andersson@linaro.org \
--cc=devicetree@vger.kernel.org \
--cc=dianders@chromium.org \
--cc=evgreen@chromium.org \
--cc=linus.walleij@linaro.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=marc.zyngier@arm.com \
--cc=rnayak@codeaurora.org \
--cc=rplsssn@codeaurora.org \
--cc=sboyd@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).