linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Lina Iyer <ilina@codeaurora.org>
To: marc.zyngier@arm.com, bjorn.andersson@linaro.org,
	sboyd@kernel.org, evgreen@chromium.org, linus.walleij@linaro.org
Cc: rplsssn@codeaurora.org, linux-kernel@vger.kernel.org,
	linux-arm-msm@vger.kernel.org, rnayak@codeaurora.org,
	devicetree@vger.kernel.org, andy.gross@linaro.org,
	dianders@chromium.org, Lina Iyer <ilina@codeaurora.org>
Subject: [PATCH RESEND v1 2/5] drivers: pinctrl: msm: enable PDC interrupt only during suspend
Date: Fri, 17 Aug 2018 13:10:23 -0600	[thread overview]
Message-ID: <20180817191026.32245-3-ilina@codeaurora.org> (raw)
In-Reply-To: <20180817191026.32245-1-ilina@codeaurora.org>

During suspend the system may power down some of the system rails. As a
result, the TLMM hw block may not be operational anymore and wakeup
capable GPIOs will not be detected. The PDC however will be operational
and the GPIOs that are routed to the PDC as IRQs can wake the system up.

To avoid being interrupted twice (for TLMM and once for PDC IRQ) when a
GPIO trips, use TLMM for active and switch to PDC for suspend. When
entering suspend, disable the TLMM wakeup interrupt and instead enable
the PDC IRQ and revert upon resume.

Signed-off-by: Lina Iyer <ilina@codeaurora.org>
---
 drivers/pinctrl/qcom/pinctrl-msm.c | 60 +++++++++++++++++++++++++++++-
 drivers/pinctrl/qcom/pinctrl-msm.h |  3 ++
 2 files changed, 62 insertions(+), 1 deletion(-)

diff --git a/drivers/pinctrl/qcom/pinctrl-msm.c b/drivers/pinctrl/qcom/pinctrl-msm.c
index 03ef1d29d078..17e541f8f09d 100644
--- a/drivers/pinctrl/qcom/pinctrl-msm.c
+++ b/drivers/pinctrl/qcom/pinctrl-msm.c
@@ -37,6 +37,7 @@
 #include "../pinctrl-utils.h"
 
 #define MAX_NR_GPIO 300
+#define MAX_PDC_IRQ 1024
 #define PS_HOLD_OFFSET 0x820
 
 /**
@@ -51,6 +52,7 @@
  * @enabled_irqs:   Bitmap of currently enabled irqs.
  * @dual_edge_irqs: Bitmap of irqs that need sw emulated dual edge
  *                  detection.
+ * @pdc_irqs:       Bitmap of wakeup capable irqs.
  * @soc;            Reference to soc_data of platform specific data.
  * @regs:           Base address for the TLMM register map.
  */
@@ -68,11 +70,14 @@ struct msm_pinctrl {
 
 	DECLARE_BITMAP(dual_edge_irqs, MAX_NR_GPIO);
 	DECLARE_BITMAP(enabled_irqs, MAX_NR_GPIO);
+	DECLARE_BITMAP(pdc_irqs, MAX_PDC_IRQ);
 
 	const struct msm_pinctrl_soc_data *soc;
 	void __iomem *regs;
 };
 
+static bool in_suspend;
+
 static int msm_get_groups_count(struct pinctrl_dev *pctldev)
 {
 	struct msm_pinctrl *pctrl = pinctrl_dev_get_drvdata(pctldev);
@@ -787,8 +792,11 @@ static int msm_gpio_irq_set_wake(struct irq_data *d, unsigned int on)
 
 	raw_spin_lock_irqsave(&pctrl->lock, flags);
 
-	if (pdc_irqd)
+	if (pdc_irqd && !in_suspend) {
 		irq_set_irq_wake(pdc_irqd->irq, on);
+		on ? set_bit(pdc_irqd->irq, pctrl->pdc_irqs) :
+		     clear_bit(pdc_irqd->irq, pctrl->pdc_irqs);
+	}
 
 	irq_set_irq_wake(pctrl->irq, on);
 
@@ -920,6 +928,8 @@ static int msm_gpio_pdc_pin_request(struct irq_data *d)
 	}
 
 	irq_set_handler_data(d->irq, irq_get_irq_data(irq));
+	irq_set_handler_data(irq, d);
+	irq_set_status_flags(irq, IRQ_DISABLE_UNLAZY);
 	disable_irq(irq);
 
 	return 0;
@@ -1070,6 +1080,54 @@ static void msm_pinctrl_setup_pm_reset(struct msm_pinctrl *pctrl)
 		}
 }
 
+int __maybe_unused msm_pinctrl_suspend_late(struct device *dev)
+{
+	struct msm_pinctrl *pctrl = dev_get_drvdata(dev);
+	struct irq_data *irqd;
+	int i;
+
+	in_suspend = true;
+	for_each_set_bit(i, pctrl->pdc_irqs, MAX_PDC_IRQ) {
+		irqd = irq_get_handler_data(i);
+		/*
+		 * We don't know if the TLMM will be functional
+		 * or not, during the suspend. If its functional,
+		 * we do not want duplicate interrupts from PDC.
+		 * Hence disable the GPIO IRQ and enable PDC IRQ.
+		 */
+		if (irqd_is_wakeup_set(irqd)) {
+			irq_set_irq_wake(irqd->irq, false);
+			disable_irq(irqd->irq);
+			enable_irq(i);
+		}
+	}
+
+	return 0;
+}
+
+int __maybe_unused msm_pinctrl_resume_late(struct device *dev)
+{
+	struct msm_pinctrl *pctrl = dev_get_drvdata(dev);
+	struct irq_data *irqd;
+	int i;
+
+	for_each_set_bit(i, pctrl->pdc_irqs, MAX_PDC_IRQ) {
+		irqd = irq_get_handler_data(i);
+		/*
+		 * The TLMM will be operational now, so disable
+		 * the PDC IRQ.
+		 */
+		if (irqd_is_wakeup_set(irq_get_irq_data(i))) {
+			disable_irq_nosync(i);
+			irq_set_irq_wake(irqd->irq, true);
+			enable_irq(irqd->irq);
+		}
+	}
+	in_suspend = false;
+
+	return 0;
+}
+
 int msm_pinctrl_probe(struct platform_device *pdev,
 		      const struct msm_pinctrl_soc_data *soc_data)
 {
diff --git a/drivers/pinctrl/qcom/pinctrl-msm.h b/drivers/pinctrl/qcom/pinctrl-msm.h
index 9b9feea540ff..21b56fb5dae9 100644
--- a/drivers/pinctrl/qcom/pinctrl-msm.h
+++ b/drivers/pinctrl/qcom/pinctrl-msm.h
@@ -123,4 +123,7 @@ int msm_pinctrl_probe(struct platform_device *pdev,
 		      const struct msm_pinctrl_soc_data *soc_data);
 int msm_pinctrl_remove(struct platform_device *pdev);
 
+int msm_pinctrl_suspend_late(struct device *dev);
+int msm_pinctrl_resume_late(struct device *dev);
+
 #endif
-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project


  parent reply	other threads:[~2018-08-17 19:11 UTC|newest]

Thread overview: 20+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-08-17 19:10 [PATCH RESEND v1 0/5] Wakeup GPIO support for SDM845 SoC Lina Iyer
2018-08-17 19:10 ` [PATCH RESEND v1 1/5] dt-bindings: pinctrl: add wakeup capable GPIOs for SDM845 Lina Iyer
2018-08-20 22:16   ` Rob Herring
2018-08-20 23:19   ` Bjorn Andersson
2018-08-21  8:37     ` Marc Zyngier
2018-08-17 19:10 ` Lina Iyer [this message]
2018-08-18 13:13   ` [PATCH RESEND v1 2/5] drivers: pinctrl: msm: enable PDC interrupt only during suspend Marc Zyngier
2018-08-20 15:26     ` Lina Iyer
2018-08-20 15:34       ` Marc Zyngier
2018-08-20 15:49         ` Lina Iyer
2018-08-21  7:11           ` Marc Zyngier
2018-08-24  8:22   ` Stephen Boyd
2018-08-24 17:14     ` Lina Iyer
2018-08-27 20:00       ` Stephen Boyd
2018-09-04 21:09         ` Lina Iyer
2018-09-04 22:00           ` Stephen Boyd
2018-09-06 16:36             ` Lina Iyer
2018-08-17 19:10 ` [PATCH RESEND v1 3/5] drivers: pinctrl: qcom: sdm845: support GPIO wakeup from suspend Lina Iyer
2018-08-17 19:10 ` [PATCH RESEND v1 4/5] arm64: dts: qcom: add wake up interrupts for GPIOs for SDM845 Lina Iyer
2018-08-17 19:10 ` [PATCH RESEND v1 5/5] irqchip/gic-v3: Allow interrupt to be configured as wake-up sources Lina Iyer

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20180817191026.32245-3-ilina@codeaurora.org \
    --to=ilina@codeaurora.org \
    --cc=andy.gross@linaro.org \
    --cc=bjorn.andersson@linaro.org \
    --cc=devicetree@vger.kernel.org \
    --cc=dianders@chromium.org \
    --cc=evgreen@chromium.org \
    --cc=linus.walleij@linaro.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=marc.zyngier@arm.com \
    --cc=rnayak@codeaurora.org \
    --cc=rplsssn@codeaurora.org \
    --cc=sboyd@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).