linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Ryder Lee <ryder.lee@mediatek.com>
To: Matthias Brugger <matthias.bgg@gmail.com>,
	Rob Herring <robh+dt@kernel.org>
Cc: Sean Wang <sean.wang@mediatek.com>,
	Roy Luo <cheng-hao.luo@mediatek.com>,
	Weijie Gao <weijie.gao@mediatek.com>,
	<devicetree@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
	<linux-arm-kernel@lists.infradead.org>,
	<linux-mediatek@lists.infradead.org>,
	Ryder Lee <ryder.lee@mediatek.com>
Subject: [PATCH v1 3/5] arm64: dts: mt7622: fix ram size for rfb1
Date: Sun, 19 Aug 2018 00:02:26 +0800	[thread overview]
Message-ID: <303c61949cb9ae949f19b1d040301510f1bdbafe.1534607107.git.ryder.lee@mediatek.com> (raw)
In-Reply-To: <7d3ce6a89ffeb221dc3197b763521582bf300577.1534607107.git.ryder.lee@mediatek.com>

Fix ram size to 512 megabytes and sort nodes in alphabetical order.

Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
Acked-by: Sean Wang <sean.wang@mediatek.com>
---
 arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts | 196 +++++++++++++--------------
 1 file changed, 98 insertions(+), 98 deletions(-)

diff --git a/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts b/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts
index a747b7b..dcad086 100644
--- a/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts
+++ b/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts
@@ -51,7 +51,7 @@
 	};
 
 	memory {
-		reg = <0 0x40000000 0 0x3F000000>;
+		reg = <0 0x40000000 0 0x20000000>;
 	};
 
 	reg_1p8v: regulator-1p8v {
@@ -81,6 +81,103 @@
 	};
 };
 
+&bch {
+	status = "disabled";
+};
+
+&btif {
+	status = "okay";
+};
+
+&cir {
+	pinctrl-names = "default";
+	pinctrl-0 = <&irrx_pins>;
+	status = "okay";
+};
+
+&eth {
+	pinctrl-names = "default";
+	pinctrl-0 = <&eth_pins>;
+	status = "okay";
+
+	gmac1: mac@1 {
+		compatible = "mediatek,eth-mac";
+		reg = <1>;
+		phy-handle = <&phy5>;
+	};
+
+	mdio-bus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		phy5: ethernet-phy@5 {
+			reg = <5>;
+			phy-mode = "sgmii";
+		};
+	};
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pins>;
+	status = "okay";
+};
+
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c2_pins>;
+	status = "okay";
+};
+
+&mmc0 {
+	pinctrl-names = "default", "state_uhs";
+	pinctrl-0 = <&emmc_pins_default>;
+	pinctrl-1 = <&emmc_pins_uhs>;
+	status = "okay";
+	bus-width = <8>;
+	max-frequency = <50000000>;
+	cap-mmc-highspeed;
+	mmc-hs200-1_8v;
+	vmmc-supply = <&reg_3p3v>;
+	vqmmc-supply = <&reg_1p8v>;
+	assigned-clocks = <&topckgen CLK_TOP_MSDC30_0_SEL>;
+	assigned-clock-parents = <&topckgen CLK_TOP_UNIV48M>;
+	non-removable;
+};
+
+&mmc1 {
+	pinctrl-names = "default", "state_uhs";
+	pinctrl-0 = <&sd0_pins_default>;
+	pinctrl-1 = <&sd0_pins_uhs>;
+	status = "okay";
+	bus-width = <4>;
+	max-frequency = <50000000>;
+	cap-sd-highspeed;
+	r_smpl = <1>;
+	cd-gpios = <&pio 81 GPIO_ACTIVE_LOW>;
+	vmmc-supply = <&reg_3p3v>;
+	vqmmc-supply = <&reg_3p3v>;
+	assigned-clocks = <&topckgen CLK_TOP_MSDC30_1_SEL>;
+	assigned-clock-parents = <&topckgen CLK_TOP_UNIV48M>;
+};
+
+&nandc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&parallel_nand_pins>;
+	status = "disabled";
+};
+
+&nor_flash {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi_nor_pins>;
+	status = "disabled";
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+	};
+};
+
 &pcie {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pcie0_pins>;
@@ -344,103 +441,6 @@
 	};
 };
 
-&bch {
-	status = "disabled";
-};
-
-&btif {
-	status = "okay";
-};
-
-&cir {
-	pinctrl-names = "default";
-	pinctrl-0 = <&irrx_pins>;
-	status = "okay";
-};
-
-&eth {
-	pinctrl-names = "default";
-	pinctrl-0 = <&eth_pins>;
-	status = "okay";
-
-	gmac1: mac@1 {
-		compatible = "mediatek,eth-mac";
-		reg = <1>;
-		phy-handle = <&phy5>;
-	};
-
-	mdio-bus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		phy5: ethernet-phy@5 {
-			reg = <5>;
-			phy-mode = "sgmii";
-		};
-	};
-};
-
-&i2c1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c1_pins>;
-	status = "okay";
-};
-
-&i2c2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c2_pins>;
-	status = "okay";
-};
-
-&mmc0 {
-	pinctrl-names = "default", "state_uhs";
-	pinctrl-0 = <&emmc_pins_default>;
-	pinctrl-1 = <&emmc_pins_uhs>;
-	status = "okay";
-	bus-width = <8>;
-	max-frequency = <50000000>;
-	cap-mmc-highspeed;
-	mmc-hs200-1_8v;
-	vmmc-supply = <&reg_3p3v>;
-	vqmmc-supply = <&reg_1p8v>;
-	assigned-clocks = <&topckgen CLK_TOP_MSDC30_0_SEL>;
-	assigned-clock-parents = <&topckgen CLK_TOP_UNIV48M>;
-	non-removable;
-};
-
-&mmc1 {
-	pinctrl-names = "default", "state_uhs";
-	pinctrl-0 = <&sd0_pins_default>;
-	pinctrl-1 = <&sd0_pins_uhs>;
-	status = "okay";
-	bus-width = <4>;
-	max-frequency = <50000000>;
-	cap-sd-highspeed;
-	r_smpl = <1>;
-	cd-gpios = <&pio 81 GPIO_ACTIVE_LOW>;
-	vmmc-supply = <&reg_3p3v>;
-	vqmmc-supply = <&reg_3p3v>;
-	assigned-clocks = <&topckgen CLK_TOP_MSDC30_1_SEL>;
-	assigned-clock-parents = <&topckgen CLK_TOP_UNIV48M>;
-};
-
-&nandc {
-	pinctrl-names = "default";
-	pinctrl-0 = <&parallel_nand_pins>;
-	status = "disabled";
-};
-
-&nor_flash {
-	pinctrl-names = "default";
-	pinctrl-0 = <&spi_nor_pins>;
-	status = "disabled";
-
-	flash@0 {
-		compatible = "jedec,spi-nor";
-		reg = <0>;
-	};
-};
-
 &pwm {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pwm7_pins>;
-- 
1.9.1


  parent reply	other threads:[~2018-08-18 16:03 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-08-18 16:02 [PATCH v1 1/5] arm64: dts: mt7622: add timer, CCI-400 and PMU nodes Ryder Lee
2018-08-18 16:02 ` [PATCH v1 2/5] arm64: dts: mt7622: add a bluetooth 5 device node Ryder Lee
2018-08-18 16:02 ` Ryder Lee [this message]
2018-08-18 16:02 ` [PATCH v1 4/5] arm64: dts: mt7622: add bananapi BPI-R64 board Ryder Lee
2018-08-18 16:02 ` [PATCH v1 5/5] dt-bindings: arm: mediatek: add support for " Ryder Lee
2018-09-25 15:10 ` [PATCH v1 1/5] arm64: dts: mt7622: add timer, CCI-400 and PMU nodes Matthias Brugger

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=303c61949cb9ae949f19b1d040301510f1bdbafe.1534607107.git.ryder.lee@mediatek.com \
    --to=ryder.lee@mediatek.com \
    --cc=cheng-hao.luo@mediatek.com \
    --cc=devicetree@vger.kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mediatek@lists.infradead.org \
    --cc=matthias.bgg@gmail.com \
    --cc=robh+dt@kernel.org \
    --cc=sean.wang@mediatek.com \
    --cc=weijie.gao@mediatek.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).