linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Abel Vesa <abel.vesa@nxp.com>
To: Lucas Stach <l.stach@pengutronix.de>,
	Sascha Hauer <kernel@pengutronix.de>,
	Dong Aisheng <aisheng.dong@nxp.com>,
	Fabio Estevam <fabio.estevam@nxp.com>,
	Anson Huang <anson.huang@nxp.com>
Cc: linux-clk@vger.kernel.org, linux-imx@nxp.com,
	Shawn Guo <shawnguo@kernel.org>,
	Linus Walleij <linus.walleij@linaro.org>,
	Rob Herring <robh@kernel.org>,
	Mark Rutland <mark.rutland@arm.com>,
	devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
	Abel Vesa <abelvesa@linux.com>, Abel Vesa <abel.vesa@nxp.com>
Subject: [RESEND v5 4/5] clk: imx: add imx composite clock
Date: Mon, 20 Aug 2018 10:16:06 +0300	[thread overview]
Message-ID: <1534749367-31085-5-git-send-email-abel.vesa@nxp.com> (raw)
In-Reply-To: <1534749367-31085-1-git-send-email-abel.vesa@nxp.com>

Since a lot of clocks on imx8 are formed by a mux, gate, predivider and
divider, the idea here is to combine all of those into one more complex
clock type, therefore moving the complexity inside the composite clock and
outside of the SoC specific clock driver.

Signed-off-by: Abel Vesa <abel.vesa@nxp.com>
Suggested-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 drivers/clk/imx/Makefile        |   1 +
 drivers/clk/imx/clk-composite.c | 126 ++++++++++++++++++++++++++++++++++++++++
 drivers/clk/imx/clk.h           |   9 +++
 3 files changed, 136 insertions(+)
 create mode 100644 drivers/clk/imx/clk-composite.c

diff --git a/drivers/clk/imx/Makefile b/drivers/clk/imx/Makefile
index b87513c..4fabb0a 100644
--- a/drivers/clk/imx/Makefile
+++ b/drivers/clk/imx/Makefile
@@ -3,6 +3,7 @@
 obj-y += \
 	clk.o \
 	clk-busy.o \
+	clk-composite.o \
 	clk-cpu.o \
 	clk-fixup-div.o \
 	clk-fixup-mux.o \
diff --git a/drivers/clk/imx/clk-composite.c b/drivers/clk/imx/clk-composite.c
new file mode 100644
index 0000000..717c6f1
--- /dev/null
+++ b/drivers/clk/imx/clk-composite.c
@@ -0,0 +1,126 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright 2018 NXP
+ */
+
+#include <linux/errno.h>
+#include <linux/slab.h>
+#include <linux/clk-provider.h>
+#include <linux/clk.h>
+
+#include "clk.h"
+
+#define PCG_PREDIV_SHIFT	16
+#define PCG_PREDIV_WIDTH	3
+
+#define PCG_DIV_SHIFT		0
+#define PCG_DIV_WIDTH		6
+
+#define PCG_PCS_SHIFT		24
+#define PCG_PCS_MASK		0x7
+
+#define PCG_CGC_SHIFT		28
+
+static unsigned long imx_clk_composite_divider_recalc_rate(struct clk_hw *hw,
+						unsigned long parent_rate)
+{
+	return clk_divider_ops.recalc_rate(hw, parent_rate);
+}
+
+static long imx_clk_composite_divider_round_rate(struct clk_hw *hw,
+						unsigned long rate,
+						unsigned long *prate)
+{
+	return clk_divider_ops.round_rate(hw, rate, prate);
+}
+
+static int imx_clk_composite_divider_set_rate(struct clk_hw *hw,
+					unsigned long rate,
+					unsigned long parent_rate)
+{
+	struct clk_divider *divider = to_clk_divider(hw);
+	int value;
+	unsigned long flags = 0;
+	u32 val;
+
+	value = divider_get_val(rate, parent_rate, NULL,
+				PCG_PREDIV_WIDTH, CLK_DIVIDER_ROUND_CLOSEST);
+	if (value < 0)
+		return value;
+
+	spin_lock_irqsave(divider->lock, flags);
+
+	val = clk_readl(divider->reg);
+	val &= ~((clk_div_mask(divider->width) << divider->shift) |
+			(clk_div_mask(PCG_DIV_WIDTH) << PCG_DIV_SHIFT));
+
+	val |= (u32)value << divider->shift;
+	val |= (u32)value << PCG_DIV_SHIFT;
+	clk_writel(val, divider->reg);
+
+	spin_unlock_irqrestore(divider->lock, flags);
+
+	return 0;
+}
+
+static const struct clk_ops imx_clk_composite_divider_ops = {
+	.recalc_rate = imx_clk_composite_divider_recalc_rate,
+	.round_rate = imx_clk_composite_divider_round_rate,
+	.set_rate = imx_clk_composite_divider_set_rate,
+};
+
+struct clk *imx_clk_composite_flags(const char *name,
+					const char **parent_names,
+					int num_parents, void __iomem *reg,
+					unsigned long flags)
+{
+	struct clk_hw *mux_hw = NULL, *div_hw = NULL, *gate_hw = NULL;
+	struct clk_divider *div = NULL;
+	struct clk_gate *gate = NULL;
+	struct clk_mux *mux = NULL;
+	struct clk *clk;
+
+	mux = kzalloc(sizeof(*mux), GFP_KERNEL);
+	if (!mux)
+		return ERR_PTR(-ENOMEM);
+	mux_hw = &mux->hw;
+	mux->reg = reg;
+	mux->shift = PCG_PCS_SHIFT;
+	mux->mask = PCG_PCS_MASK;
+
+	div = kzalloc(sizeof(*div), GFP_KERNEL);
+	if (!div) {
+		kfree(mux);
+		return ERR_PTR(-ENOMEM);
+	}
+	div_hw = &div->hw;
+	div->reg = reg;
+	div->shift = PCG_PREDIV_SHIFT;
+	div->width = PCG_PREDIV_WIDTH;
+	div->lock = &imx_ccm_lock;
+	div->flags = CLK_DIVIDER_ROUND_CLOSEST;
+
+	gate = kzalloc(sizeof(*gate), GFP_KERNEL);
+	if (!gate) {
+		kfree(mux);
+		kfree(div);
+		return ERR_PTR(-ENOMEM);
+	}
+	gate_hw = &gate->hw;
+	gate->reg = reg;
+	gate->bit_idx = PCG_CGC_SHIFT;
+
+	flags |= CLK_SET_RATE_NO_REPARENT | CLK_OPS_PARENT_ENABLE;
+
+	clk = clk_register_composite(NULL, name, parent_names, num_parents,
+					mux_hw, &clk_mux_ops, div_hw,
+					&imx_clk_composite_divider_ops, gate_hw,
+					&clk_gate_ops, flags);
+	if (IS_ERR(clk)) {
+		kfree(mux);
+		kfree(div);
+		kfree(gate);
+	}
+
+	return clk;
+}
diff --git a/drivers/clk/imx/clk.h b/drivers/clk/imx/clk.h
index 12b3fd6..9dbb680 100644
--- a/drivers/clk/imx/clk.h
+++ b/drivers/clk/imx/clk.h
@@ -232,4 +232,13 @@ struct clk *imx_clk_cpu(const char *name, const char *parent_name,
 		struct clk *div, struct clk *mux, struct clk *pll,
 		struct clk *step);
 
+struct clk *imx_clk_composite_flags(const char *name, const char **parent_names,
+		int num_parents, void __iomem *reg, unsigned long flags);
+
+#define imx_clk_composite(name, parent_names, reg) \
+	imx_clk_composite_flags(name, parent_names, ARRAY_SIZE(parent_names), reg, 0)
+
+#define imx_clk_composite_critical(name, parent_names, reg) \
+	imx_clk_composite_flags(name, parent_names, ARRAY_SIZE(parent_names), reg, CLK_IS_CRITICAL)
+
 #endif
-- 
2.7.4


  parent reply	other threads:[~2018-08-20  7:16 UTC|newest]

Thread overview: 8+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-08-20  7:16 [RESEND v5 0/5] Add i.MX8MQ clock driver Abel Vesa
2018-08-20  7:16 ` [RESEND v5 1/5] dt-bindings: add binding for i.MX8MQ CCM Abel Vesa
2018-08-20  7:16 ` [RESEND v5 2/5] clk: imx: add fractional PLL output clock Abel Vesa
2018-08-20  7:16 ` [RESEND v5 3/5] clk: imx: add SCCG PLL type Abel Vesa
2018-08-20  7:16 ` Abel Vesa [this message]
2018-08-21  6:58   ` [RESEND v5 4/5] clk: imx: add imx composite clock Sascha Hauer
2018-08-22 13:17     ` Abel Vesa
2018-08-20  7:16 ` [RESEND v5 5/5] clk: imx: add clock driver for i.MX8MQ CCM Abel Vesa

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1534749367-31085-5-git-send-email-abel.vesa@nxp.com \
    --to=abel.vesa@nxp.com \
    --cc=abelvesa@linux.com \
    --cc=aisheng.dong@nxp.com \
    --cc=anson.huang@nxp.com \
    --cc=devicetree@vger.kernel.org \
    --cc=fabio.estevam@nxp.com \
    --cc=kernel@pengutronix.de \
    --cc=l.stach@pengutronix.de \
    --cc=linus.walleij@linaro.org \
    --cc=linux-clk@vger.kernel.org \
    --cc=linux-imx@nxp.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mark.rutland@arm.com \
    --cc=robh@kernel.org \
    --cc=shawnguo@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).