From: Jisheng Zhang <Jisheng.Zhang@synaptics.com>
To: Jingoo Han <jingoohan1@gmail.com>,
Joao Pinto <Joao.Pinto@synopsys.com>,
Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>,
Bjorn Helgaas <bhelgaas@google.com>
Cc: linux-pci@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org
Subject: [PATCH] PCI: dwc: fix scheduling while atomic issues
Date: Tue, 21 Aug 2018 10:44:33 +0800 [thread overview]
Message-ID: <20180821104433.1c408d7e@xhacker.debian> (raw)
When programming inbound/outbound atu, we call usleep_range() after
each checking PCIE_ATU_ENABLE bit. Unfortunately, the atu programming
can be called in atomic context:
inbound atu programming could be called through
pci_epc_write_header()
=>dw_pcie_ep_write_header()
=>dw_pcie_prog_inbound_atu()
outbound atu programming could be called through
pci_bus_read_config_dword()
=>dw_pcie_rd_conf()
=>dw_pcie_prog_outbound_atu()
Fix this issue by calling udelay() instead.
Signed-off-by: Jisheng Zhang <Jisheng.Zhang@synaptics.com>
---
drivers/pci/controller/dwc/pcie-designware.c | 8 ++++----
drivers/pci/controller/dwc/pcie-designware.h | 3 +--
2 files changed, 5 insertions(+), 6 deletions(-)
diff --git a/drivers/pci/controller/dwc/pcie-designware.c b/drivers/pci/controller/dwc/pcie-designware.c
index 778c4f76a884..4c15929d9c79 100644
--- a/drivers/pci/controller/dwc/pcie-designware.c
+++ b/drivers/pci/controller/dwc/pcie-designware.c
@@ -135,7 +135,7 @@ static void dw_pcie_prog_outbound_atu_unroll(struct dw_pcie *pci, int index,
if (val & PCIE_ATU_ENABLE)
return;
- usleep_range(LINK_WAIT_IATU_MIN, LINK_WAIT_IATU_MAX);
+ udelay(LINK_WAIT_IATU);
}
dev_err(pci->dev, "Outbound iATU is not being enabled\n");
}
@@ -178,7 +178,7 @@ void dw_pcie_prog_outbound_atu(struct dw_pcie *pci, int index, int type,
if (val & PCIE_ATU_ENABLE)
return;
- usleep_range(LINK_WAIT_IATU_MIN, LINK_WAIT_IATU_MAX);
+ udelay(LINK_WAIT_IATU);
}
dev_err(pci->dev, "Outbound iATU is not being enabled\n");
}
@@ -236,7 +236,7 @@ static int dw_pcie_prog_inbound_atu_unroll(struct dw_pcie *pci, int index,
if (val & PCIE_ATU_ENABLE)
return 0;
- usleep_range(LINK_WAIT_IATU_MIN, LINK_WAIT_IATU_MAX);
+ udelay(LINK_WAIT_IATU);
}
dev_err(pci->dev, "Inbound iATU is not being enabled\n");
@@ -282,7 +282,7 @@ int dw_pcie_prog_inbound_atu(struct dw_pcie *pci, int index, int bar,
if (val & PCIE_ATU_ENABLE)
return 0;
- usleep_range(LINK_WAIT_IATU_MIN, LINK_WAIT_IATU_MAX);
+ udelay(LINK_WAIT_IATU);
}
dev_err(pci->dev, "Inbound iATU is not being enabled\n");
diff --git a/drivers/pci/controller/dwc/pcie-designware.h b/drivers/pci/controller/dwc/pcie-designware.h
index 96126fd8403c..8bab329c5cd3 100644
--- a/drivers/pci/controller/dwc/pcie-designware.h
+++ b/drivers/pci/controller/dwc/pcie-designware.h
@@ -26,8 +26,7 @@
/* Parameters for the waiting for iATU enabled routine */
#define LINK_WAIT_MAX_IATU_RETRIES 5
-#define LINK_WAIT_IATU_MIN 9000
-#define LINK_WAIT_IATU_MAX 10000
+#define LINK_WAIT_IATU 9000
/* Synopsys-specific PCIe configuration registers */
#define PCIE_PORT_LINK_CONTROL 0x710
--
2.18.0
next reply other threads:[~2018-08-21 2:47 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-08-21 2:44 Jisheng Zhang [this message]
2018-08-21 5:34 ` [PATCH] PCI: dwc: fix scheduling while atomic issues kbuild test robot
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180821104433.1c408d7e@xhacker.debian \
--to=jisheng.zhang@synaptics.com \
--cc=Joao.Pinto@synopsys.com \
--cc=bhelgaas@google.com \
--cc=jingoohan1@gmail.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=lorenzo.pieralisi@arm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).