[PATCH 4/7] dt-bindings: spi: add binding file for NXP FlexSPI driver

From: Yogesh Gaur <yogeshnarayan.gaur@nxp.com>
To: linux-mtd@lists.infradead.org, boris.brezillon@bootlin.com,
	marek.vasut@gmail.com, linux-spi@vger.kernel.org,
	devicetree@vger.kernel.org
Cc: robh@kernel.org, mark.rutland@arm.com, shawnguo@kernel.org,
	linux-arm-kernel@lists.infradead.org,
	computersforpeace@gmail.com, frieder.schrempf@exceet.de,
	linux-kernel@vger.kernel.org,
	Yogesh Gaur <yogeshnarayan.gaur@nxp.com>
Subject: [PATCH 4/7] dt-bindings: spi: add binding file for NXP FlexSPI driver
Date: Fri, 31 Aug 2018 16:00:01 +0530	[thread overview]
Message-ID: <1535711404-29528-5-git-send-email-yogeshnarayan.gaur@nxp.com> (raw)
In-Reply-To: <1535711404-29528-1-git-send-email-yogeshnarayan.gaur@nxp.com>

Add binding file for NXP FlexSPI driver.

Signed-off-by: Yogesh Gaur <yogeshnarayan.gaur@nxp.com>
---
 .../devicetree/bindings/spi/spi-nxp-fspi.txt       | 42 ++++++++++++++++++++++
 1 file changed, 42 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/spi/spi-nxp-fspi.txt

diff --git a/Documentation/devicetree/bindings/spi/spi-nxp-fspi.txt b/Documentation/devicetree/bindings/spi/spi-nxp-fspi.txt
new file mode 100644
index 0000000..9f07116
--- /dev/null
+++ b/Documentation/devicetree/bindings/spi/spi-nxp-fspi.txt
@@ -0,0 +1,42 @@
+* NXP Flex Serial Peripheral Interface (FSPI)
+
+Required properties:
+  - compatible : Should be "nxp,lx2160a-fspi"
+  - reg :        First contains the register location and length,
+                 Second contains the memory mapping address and length
+  - reg-names :  Should contain the resource reg names:
+                 - fspi_base: iconfiguration register address space
+                 - fspi_mmap: memory mapped address space
+  - interrupts : Should contain the interrupt for the device
+
+Optional properties:
+  - big-endian : See common-properties.txt.
+
+Required SPI slave node properties:
+  - reg :        There are two buses (A and B) with two chip selects each.
+                 This encodes to which bus and CS the flash is connected:
+                 - <0>: Bus A, CS 0
+                 - <1>: Bus A, CS 1
+                 - <2>: Bus B, CS 0
+                 - <3>: Bus B, CS 1
+
+Example showing the usage of two SPI NOR slave devices on bus A:
+
+fspi0: flexspi@20c0000 {
+	compatible = "nxp,lx2160a-fspi";
+	reg = <0x0 0x20c0000 0x0 0x10000>, <0x0 0x20000000 0x0 0x10000000>;
+	reg-names = "fspi_base", "fspi_mmap";
+	interrupts = <0 25 0x4>; /* Level high type */
+	clocks = <&clockgen 4 3>, <&clockgen 4 3>;
+	clock-names = "fspi_en", "fspi";
+
+	flash0: mt35xu512aba@0 {
+		reg = <0>;
+		....
+	};
+
+	flash1: mt35xu512aba@1 {
+		reg = <1>;
+		....
+	};
+};
-- 
2.7.4

