linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Codrin Ciubotariu <codrin.ciubotariu@microchip.com>
To: <alsa-devel@alsa-project.org>, <devicetree@vger.kernel.org>,
	<broonie@kernel.org>, <robh+dt@kernel.org>,
	<alexandre.belloni@bootlin.com>, <nicolas.ferre@microchip.com>
Cc: <linux-kernel@vger.kernel.org>,
	<linux-arm-kernel@lists.infradead.org>, <florian.meier@koalo.de>,
	<cristian.birsan@microchip.com>
Subject: [PATCH v2 1/2] ASoC: Add driver for PROTO Audio CODEC (with a WM8731)
Date: Fri, 31 Aug 2018 20:14:35 +0300	[thread overview]
Message-ID: <20180831171436.13360-2-codrin.ciubotariu@microchip.com> (raw)
In-Reply-To: <20180831171436.13360-1-codrin.ciubotariu@microchip.com>

Add support for the MikroElektronika PROTO audio codec board.

URL to the audio chip:
http://www.mikroe.com/add-on-boards/audio-voice/audio-codec-proto/

Signed-off-by: Florian Meier <florian.meier@koalo.de>
Signed-off-by: Codrin Ciubotariu <codrin.ciubotariu@microchip.com>
---

Changes in v2:
 - removed constraints for the fixed SYSCLK;
 - fixed errors reported by kbuild;
 - updated 'help' from Kconfig;

 sound/soc/atmel/Kconfig        |  11 +++
 sound/soc/atmel/Makefile       |   2 +
 sound/soc/atmel/mikroe-proto.c | 165 +++++++++++++++++++++++++++++++++
 3 files changed, 178 insertions(+)
 create mode 100644 sound/soc/atmel/mikroe-proto.c

diff --git a/sound/soc/atmel/Kconfig b/sound/soc/atmel/Kconfig
index 64b784e96f84..81a0712d4f14 100644
--- a/sound/soc/atmel/Kconfig
+++ b/sound/soc/atmel/Kconfig
@@ -97,4 +97,15 @@ config SND_ATMEL_SOC_I2S
 	help
 	  Say Y or M if you want to add support for Atmel ASoc driver for boards
 	  using I2S.
+
+config SND_SOC_MIKROE_PROTO
+	tristate "Support for Mikroe-PROTO board"
+	depends on OF
+	select SND_SOC_WM8731
+	help
+	  Say Y or M if you want to add support for MikroElektronika PROTO Audio
+	  Board. This board contains the WM8731 codec, which can be configured
+	  using I2C over SDA (MPU Data Input) and SCL (MPU Clock Input) pins.
+	  Both playback and capture are supported.
+
 endif
diff --git a/sound/soc/atmel/Makefile b/sound/soc/atmel/Makefile
index cd87cb4bcff5..9f41bfa0fea3 100644
--- a/sound/soc/atmel/Makefile
+++ b/sound/soc/atmel/Makefile
@@ -17,6 +17,7 @@ snd-soc-sam9x5-wm8731-objs := sam9x5_wm8731.o
 snd-atmel-soc-classd-objs := atmel-classd.o
 snd-atmel-soc-pdmic-objs := atmel-pdmic.o
 snd-atmel-soc-tse850-pcm5142-objs := tse850-pcm5142.o
+snd-soc-mikroe-proto-objs := mikroe-proto.o
 
 obj-$(CONFIG_SND_AT91_SOC_SAM9G20_WM8731) += snd-soc-sam9g20-wm8731.o
 obj-$(CONFIG_SND_ATMEL_SOC_WM8904) += snd-atmel-soc-wm8904.o
@@ -24,3 +25,4 @@ obj-$(CONFIG_SND_AT91_SOC_SAM9X5_WM8731) += snd-soc-sam9x5-wm8731.o
 obj-$(CONFIG_SND_ATMEL_SOC_CLASSD) += snd-atmel-soc-classd.o
 obj-$(CONFIG_SND_ATMEL_SOC_PDMIC) += snd-atmel-soc-pdmic.o
 obj-$(CONFIG_SND_ATMEL_SOC_TSE850_PCM5142) += snd-atmel-soc-tse850-pcm5142.o
+obj-$(CONFIG_SND_SOC_MIKROE_PROTO) += snd-soc-mikroe-proto.o
diff --git a/sound/soc/atmel/mikroe-proto.c b/sound/soc/atmel/mikroe-proto.c
new file mode 100644
index 000000000000..d47aaa5bf75a
--- /dev/null
+++ b/sound/soc/atmel/mikroe-proto.c
@@ -0,0 +1,165 @@
+/*
+ * ASoC driver for PROTO AudioCODEC (with a WM8731)
+ *
+ * Author:      Florian Meier, <koalo@koalo.de>
+ *	      Copyright 2013
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/platform_device.h>
+
+#include <sound/core.h>
+#include <sound/pcm.h>
+#include <sound/soc.h>
+#include <sound/jack.h>
+
+#include "../codecs/wm8731.h"
+
+#define XTAL_RATE 12288000	/* This is fixed on this board */
+
+static int snd_proto_init(struct snd_soc_pcm_runtime *rtd)
+{
+	struct snd_soc_card *card = rtd->card;
+	struct snd_soc_dai *codec_dai = rtd->codec_dai;
+
+	/* Set proto sysclk */
+	int ret = snd_soc_dai_set_sysclk(codec_dai, WM8731_SYSCLK_XTAL,
+					 XTAL_RATE, SND_SOC_CLOCK_IN);
+	if (ret < 0) {
+		dev_err(card->dev, "Failed to set WM8731 SYSCLK: %d\n",
+			ret);
+		return ret;
+	}
+
+	return 0;
+}
+
+static const struct snd_soc_dapm_widget snd_proto_widget[] = {
+	SND_SOC_DAPM_MIC("Microphone Jack", NULL),
+	SND_SOC_DAPM_HP("Headphone Jack", NULL),
+};
+
+static const struct snd_soc_dapm_route snd_proto_route[] = {
+	/* speaker connected to LHPOUT/RHPOUT */
+	{"Headphone Jack", NULL, "LHPOUT"},
+	{"Headphone Jack", NULL, "RHPOUT"},
+
+	/* mic is connected to Mic Jack, with WM8731 Mic Bias */
+	{"MICIN", NULL, "Mic Bias"},
+	{"Mic Bias", NULL, "Microphone Jack"},
+};
+
+/* audio machine driver */
+static struct snd_soc_card snd_proto = {
+	.name		= "snd_mikroe_proto",
+	.owner		= THIS_MODULE,
+	.dapm_widgets	= snd_proto_widget,
+	.num_dapm_widgets = ARRAY_SIZE(snd_proto_widget),
+	.dapm_routes	= snd_proto_route,
+	.num_dapm_routes = ARRAY_SIZE(snd_proto_route),
+};
+
+static int snd_proto_probe(struct platform_device *pdev)
+{
+	struct snd_soc_dai_link *dai;
+	struct device_node *np = pdev->dev.of_node;
+	struct device_node *codec_np, *cpu_np;
+	struct device_node *bitclkmaster = NULL;
+	struct device_node *framemaster = NULL;
+	unsigned int dai_fmt;
+	int ret = 0;
+
+	if (!np) {
+		dev_err(&pdev->dev, "No device node supplied\n");
+		return -EINVAL;
+	}
+
+	snd_proto.dev = &pdev->dev;
+	ret = snd_soc_of_parse_card_name(&snd_proto, "model");
+	if (ret)
+		return ret;
+
+	dai = devm_kzalloc(&pdev->dev, sizeof(*dai), GFP_KERNEL);
+	if (!dai)
+		return -ENOMEM;
+
+	snd_proto.dai_link = dai;
+	snd_proto.num_links = 1;
+
+	dai->name = "WM8731";
+	dai->stream_name = "WM8731 HiFi";
+	dai->codec_dai_name = "wm8731-hifi";
+	dai->init = &snd_proto_init;
+
+	codec_np = of_parse_phandle(np, "audio-codec", 0);
+	if (!codec_np) {
+		dev_err(&pdev->dev, "audio-codec node missing\n");
+		return -EINVAL;
+	}
+	dai->codec_of_node = codec_np;
+
+	cpu_np = of_parse_phandle(np, "i2s-controller", 0);
+	if (!cpu_np) {
+		dev_err(&pdev->dev, "i2s-controller missing\n");
+		return -EINVAL;
+	}
+	dai->cpu_of_node = cpu_np;
+	dai->platform_of_node = cpu_np;
+
+	dai_fmt = snd_soc_of_parse_daifmt(np, NULL,
+					  &bitclkmaster, &framemaster);
+	if (bitclkmaster != framemaster) {
+		dev_err(&pdev->dev, "Must be the same bitclock and frame master\n");
+		return -EINVAL;
+	}
+	if (bitclkmaster) {
+		dai_fmt &= ~SND_SOC_DAIFMT_MASTER_MASK;
+		if (codec_np == bitclkmaster)
+			dai_fmt |= SND_SOC_DAIFMT_CBM_CFM;
+		else
+			dai_fmt |= SND_SOC_DAIFMT_CBS_CFS;
+	}
+	of_node_put(bitclkmaster);
+	of_node_put(framemaster);
+	dai->dai_fmt = dai_fmt;
+
+	of_node_put(codec_np);
+	of_node_put(cpu_np);
+
+	ret = snd_soc_register_card(&snd_proto);
+	if (ret && ret != -EPROBE_DEFER)
+		dev_err(&pdev->dev,
+			"snd_soc_register_card() failed: %d\n", ret);
+
+	return ret;
+}
+
+static int snd_proto_remove(struct platform_device *pdev)
+{
+	return snd_soc_unregister_card(&snd_proto);
+}
+
+static const struct of_device_id snd_proto_of_match[] = {
+	{ .compatible = "mikroe,mikroe-proto", },
+	{},
+};
+MODULE_DEVICE_TABLE(of, snd_proto_of_match);
+
+static struct platform_driver snd_proto_driver = {
+	.driver = {
+		.name   = "snd-mikroe-proto",
+		.of_match_table = snd_proto_of_match,
+	},
+	.probe	  = snd_proto_probe,
+	.remove	 = snd_proto_remove,
+};
+
+module_platform_driver(snd_proto_driver);
+
+MODULE_AUTHOR("Florian Meier");
+MODULE_DESCRIPTION("ASoC Driver for PROTO board (WM8731)");
+MODULE_LICENSE("GPL");
-- 
2.17.1


  reply	other threads:[~2018-08-31 17:14 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-08-31 17:14 [PATCH v2 0/2] Add support for MikroElektronika PROTO codec Codrin Ciubotariu
2018-08-31 17:14 ` Codrin Ciubotariu [this message]
2018-09-03 13:44   ` Applied "ASoC: Add driver for PROTO Audio CODEC (with a WM8731)" to the asoc tree Mark Brown
2018-08-31 17:14 ` [PATCH v2 2/2] ASoC: mikroe-proto: dt-bindings: add DT bindings for PROTO board Codrin Ciubotariu
2018-09-03 13:44   ` Applied "ASoC: mikroe-proto: dt-bindings: add DT bindings for PROTO board" to the asoc tree Mark Brown

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20180831171436.13360-2-codrin.ciubotariu@microchip.com \
    --to=codrin.ciubotariu@microchip.com \
    --cc=alexandre.belloni@bootlin.com \
    --cc=alsa-devel@alsa-project.org \
    --cc=broonie@kernel.org \
    --cc=cristian.birsan@microchip.com \
    --cc=devicetree@vger.kernel.org \
    --cc=florian.meier@koalo.de \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=nicolas.ferre@microchip.com \
    --cc=robh+dt@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).