From: Bjorn Andersson <bjorn.andersson@linaro.org>
To: Andy Gross <andy.gross@linaro.org>, David Brown <david.brown@linaro.org>
Cc: Rob Herring <robh+dt@kernel.org>,
Mark Rutland <mark.rutland@arm.com>,
linux-arm-msm@vger.kernel.org, linux-soc@vger.kernel.org,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [PATCH v3 3/8] arm64: dts: qcom: msm8998: Add tsens and thermal-zones
Date: Mon, 3 Sep 2018 22:01:18 -0700 [thread overview]
Message-ID: <20180904050123.26601-4-bjorn.andersson@linaro.org> (raw)
In-Reply-To: <20180904050123.26601-1-bjorn.andersson@linaro.org>
Add the two tsens instances and the thermal zones for CPUs, GPUs,
battery and skin sensors.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
---
Changes since v2:
- New patch
arch/arm64/boot/dts/qcom/msm8998-mtp.dtsi | 38 +++++
arch/arm64/boot/dts/qcom/msm8998.dtsi | 193 ++++++++++++++++++++++
2 files changed, 231 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/msm8998-mtp.dtsi b/arch/arm64/boot/dts/qcom/msm8998-mtp.dtsi
index 09b46c54e413..202aa1a5cf27 100644
--- a/arch/arm64/boot/dts/qcom/msm8998-mtp.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8998-mtp.dtsi
@@ -12,6 +12,44 @@
stdout-path = "serial0:115200n8";
};
+ thermal-zones {
+ battery-thermal {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+
+ thermal-sensors = <&tsens0 0>;
+
+ trips {
+ battery_crit: trip0 {
+ temperature = <60000>;
+ hysteresis = <2000>;
+ type = "critical";
+ };
+ };
+ };
+
+ skin-thermal {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+
+ thermal-sensors = <&tsens1 5>;
+
+ trips {
+ skin_alert: trip0 {
+ temperature = <44000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ skip_crit: trip1 {
+ temperature = <70000>;
+ hysteresis = <2000>;
+ type = "critical";
+ };
+ };
+ };
+ };
+
vph_pwr: vph-pwr-regulator {
compatible = "regulator-fixed";
regulator-name = "vph_pwr";
diff --git a/arch/arm64/boot/dts/qcom/msm8998.dtsi b/arch/arm64/boot/dts/qcom/msm8998.dtsi
index 98b9edb89424..f92f04f9ed6d 100644
--- a/arch/arm64/boot/dts/qcom/msm8998.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8998.dtsi
@@ -225,6 +225,183 @@
};
};
+ thermal-zones {
+ cpu-thermal0 {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+
+ thermal-sensors = <&tsens0 6>;
+
+ trips {
+ cpu_alert0: trip0 {
+ temperature = <75000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu_crit0: trip1 {
+ temperature = <110000>;
+ hysteresis = <2000>;
+ type = "critical";
+ };
+ };
+ };
+
+ cpu-thermal1 {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+
+ thermal-sensors = <&tsens0 7>;
+
+ trips {
+ cpu_alert1: trip0 {
+ temperature = <75000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu_crit1: trip1 {
+ temperature = <110000>;
+ hysteresis = <2000>;
+ type = "critical";
+ };
+ };
+ };
+
+ cpu-thermal2 {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+
+ thermal-sensors = <&tsens0 8>;
+
+ trips {
+ cpu_alert2: trip0 {
+ temperature = <75000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu_crit2: trip1 {
+ temperature = <110000>;
+ hysteresis = <2000>;
+ type = "critical";
+ };
+ };
+ };
+
+ cpu-thermal3 {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+
+ thermal-sensors = <&tsens0 9>;
+
+ trips {
+ cpu_alert3: trip0 {
+ temperature = <75000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu_crit3: trip1 {
+ temperature = <110000>;
+ hysteresis = <2000>;
+ type = "critical";
+ };
+ };
+ };
+
+ cpu-thermal4 {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+
+ thermal-sensors = <&tsens0 10>;
+
+ trips {
+ cpu_alert4: trip0 {
+ temperature = <75000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu_crit4: trip1 {
+ temperature = <110000>;
+ hysteresis = <2000>;
+ type = "critical";
+ };
+ };
+ };
+
+ cpu-thermal5 {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+
+ thermal-sensors = <&tsens0 11>;
+
+ trips {
+ cpu_alert5: trip0 {
+ temperature = <75000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu_crit5: trip1 {
+ temperature = <110000>;
+ hysteresis = <2000>;
+ type = "critical";
+ };
+ };
+ };
+
+ cpu-thermal6 {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+
+ thermal-sensors = <&tsens1 0>;
+
+ trips {
+ cpu_alert6: trip0 {
+ temperature = <75000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu_crit6: trip1 {
+ temperature = <110000>;
+ hysteresis = <2000>;
+ type = "critical";
+ };
+ };
+ };
+
+ cpu-thermal7 {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+
+ thermal-sensors = <&tsens1 1>;
+
+ trips {
+ cpu_alert7: trip0 {
+ temperature = <75000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu_crit7: trip1 {
+ temperature = <110000>;
+ hysteresis = <2000>;
+ type = "critical";
+ };
+ };
+ };
+
+ gpu-thermal {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+
+ thermal-sensors = <&tsens1 3>;
+ };
+ };
+
timer {
compatible = "arm,armv8-timer";
interrupts = <GIC_PPI 1 IRQ_TYPE_LEVEL_LOW>,
@@ -281,6 +458,22 @@
cell-index = <0>;
};
+ tsens0: thermal@10aa000 {
+ compatible = "qcom,msm8998-tsens", "qcom,tsens-v2";
+ reg = <0x10aa000 0x2000>;
+
+ #qcom,sensors = <12>;
+ #thermal-sensor-cells = <1>;
+ };
+
+ tsens1: thermal@10ad000 {
+ compatible = "qcom,msm8998-tsens", "qcom,tsens-v2";
+ reg = <0x10ad000 0x2000>;
+
+ #qcom,sensors = <8>;
+ #thermal-sensor-cells = <1>;
+ };
+
apcs_glb: mailbox@9820000 {
compatible = "qcom,msm8998-apcs-hmss-global";
reg = <0x17911000 0x1000>;
--
2.18.0
next prev parent reply other threads:[~2018-09-04 5:00 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-09-04 5:01 [PATCH v3 0/8] MSM8998 and MTP dts Bjorn Andersson
2018-09-04 5:01 ` [PATCH v3 1/8] arm64: dts: Add msm8998 SoC and MTP board support Bjorn Andersson
2018-09-04 5:01 ` [PATCH v3 2/8] arm64: dts: qcom: msm8998: Add RPM and regulators for MTP Bjorn Andersson
2018-09-04 5:01 ` Bjorn Andersson [this message]
2018-09-06 13:53 ` [PATCH v3 3/8] arm64: dts: qcom: msm8998: Add tsens and thermal-zones Amit Kucheria
2018-09-06 15:46 ` Bjorn Andersson
2018-09-04 5:01 ` [PATCH v3 4/8] arm64: dts: qcom: msm8998: Add pmi8998 file Bjorn Andersson
2018-09-04 5:01 ` [PATCH v3 5/8] arm64: dts: qcom: msm8998: Add smem related nodes Bjorn Andersson
2018-09-04 5:01 ` [PATCH v3 6/8] arm64: dts: qcom: msm8998: Add firmware node Bjorn Andersson
2018-09-04 5:01 ` [PATCH v3 7/8] arm64: dts: qcom: msm8998: Add the qfprom node Bjorn Andersson
2018-09-04 5:01 ` [PATCH v3 8/8] arm64: dts: qcom: msm8998: Add smp2p nodes Bjorn Andersson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180904050123.26601-4-bjorn.andersson@linaro.org \
--to=bjorn.andersson@linaro.org \
--cc=andy.gross@linaro.org \
--cc=david.brown@linaro.org \
--cc=devicetree@vger.kernel.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-soc@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).