[01/10] phy: Add MIPI D-PHY mode
diff mbox series

Message ID 00e3d5da1ca3c03ba60350c1cf78ab44693ff493.1536138624.git-series.maxime.ripard@bootlin.com
State Superseded
Headers show
Series
  • phy: Add configuration interface for MIPI D-PHY devices
Related show

Commit Message

Maxime Ripard Sept. 5, 2018, 9:16 a.m. UTC
MIPI D-PHY is a MIPI standard meant mostly for display and cameras in
embedded systems. Add a mode for it.

Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
---
 include/linux/phy/phy.h | 1 +
 1 file changed, 1 insertion(+)

Comments

Laurent Pinchart Sept. 5, 2018, 1:46 p.m. UTC | #1
Hi Maxime,

Thank you for the patch.

On Wednesday, 5 September 2018 12:16:32 EEST Maxime Ripard wrote:
> MIPI D-PHY is a MIPI standard meant mostly for display and cameras in
> embedded systems. Add a mode for it.
> 
> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>

Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>

> ---
>  include/linux/phy/phy.h | 1 +
>  1 file changed, 1 insertion(+)
> 
> diff --git a/include/linux/phy/phy.h b/include/linux/phy/phy.h
> index 9713aebdd348..9cba7fe16c23 100644
> --- a/include/linux/phy/phy.h
> +++ b/include/linux/phy/phy.h
> @@ -40,6 +40,7 @@ enum phy_mode {
>  	PHY_MODE_10GKR,
>  	PHY_MODE_UFS_HS_A,
>  	PHY_MODE_UFS_HS_B,
> +	PHY_MODE_MIPI_DPHY,
>  };
> 
>  /**

Patch
diff mbox series

diff --git a/include/linux/phy/phy.h b/include/linux/phy/phy.h
index 9713aebdd348..9cba7fe16c23 100644
--- a/include/linux/phy/phy.h
+++ b/include/linux/phy/phy.h
@@ -40,6 +40,7 @@  enum phy_mode {
 	PHY_MODE_10GKR,
 	PHY_MODE_UFS_HS_A,
 	PHY_MODE_UFS_HS_B,
+	PHY_MODE_MIPI_DPHY,
 };
 
 /**