From: Bjorn Andersson <bjorn.andersson@linaro.org>
To: Ohad Ben-Cohen <ohad@wizery.com>,
Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: linux-remoteproc@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-arm-msm@vger.kernel.org,
Niklas Cassel <niklas.cassel@linaro.org>
Subject: [PATCH v2 2/2] remoteproc: qcom: Rename Hexagon v5 modem driver
Date: Fri, 14 Sep 2018 10:35:52 -0700 [thread overview]
Message-ID: <20180914173552.20370-3-bjorn.andersson@linaro.org> (raw)
In-Reply-To: <20180914173552.20370-1-bjorn.andersson@linaro.org>
The qcom_q6v5_pil implements support for the self-authenticating modem
subsystem. With the introduction of other q6v5 based non-TZ based
remoteproc driver the current name is cause for confusion, so rename it
to be more specific.
No functional change.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
---
drivers/remoteproc/Kconfig | 14 +++++++-------
drivers/remoteproc/Makefile | 2 +-
2 files changed, 8 insertions(+), 8 deletions(-)
diff --git a/drivers/remoteproc/Kconfig b/drivers/remoteproc/Kconfig
index 425e502c6471..8894935583e2 100644
--- a/drivers/remoteproc/Kconfig
+++ b/drivers/remoteproc/Kconfig
@@ -92,30 +92,30 @@ config QCOM_Q6V5_COMMON
depends on ARCH_QCOM
depends on QCOM_SMEM
-config QCOM_Q6V5_PAS
- tristate "Qualcomm Hexagon v5 Peripheral Authentication Service support"
+config QCOM_Q6V5_MSS
+ tristate "Qualcomm Hexagon V5 self-authenticating modem subsystem support"
depends on OF && ARCH_QCOM
depends on QCOM_SMEM
depends on RPMSG_QCOM_SMD || (COMPILE_TEST && RPMSG_QCOM_SMD=n)
depends on RPMSG_QCOM_GLINK_SMEM || RPMSG_QCOM_GLINK_SMEM=n
depends on QCOM_SYSMON || QCOM_SYSMON=n
select MFD_SYSCON
- select QCOM_MDT_LOADER
select QCOM_Q6V5_COMMON
select QCOM_RPROC_COMMON
select QCOM_SCM
help
- Say y here to support the TrustZone based Peripherial Image Loader
- for the Qualcomm Hexagon v5 based remote processors.
+ Say y here to support the Qualcomm self-authenticating modem
+ subsystem based on Hexagon V5.
-config QCOM_Q6V5_PIL
- tristate "Qualcomm Hexagon V5 Peripherial Image Loader"
+config QCOM_Q6V5_PAS
+ tristate "Qualcomm Hexagon v5 Peripheral Authentication Service support"
depends on OF && ARCH_QCOM
depends on QCOM_SMEM
depends on RPMSG_QCOM_SMD || (COMPILE_TEST && RPMSG_QCOM_SMD=n)
depends on RPMSG_QCOM_GLINK_SMEM || RPMSG_QCOM_GLINK_SMEM=n
depends on QCOM_SYSMON || QCOM_SYSMON=n
select MFD_SYSCON
+ select QCOM_MDT_LOADER
select QCOM_Q6V5_COMMON
select QCOM_RPROC_COMMON
select QCOM_SCM
diff --git a/drivers/remoteproc/Makefile b/drivers/remoteproc/Makefile
index eb86c8ba5a87..050f41ac93b0 100644
--- a/drivers/remoteproc/Makefile
+++ b/drivers/remoteproc/Makefile
@@ -16,8 +16,8 @@ obj-$(CONFIG_DA8XX_REMOTEPROC) += da8xx_remoteproc.o
obj-$(CONFIG_KEYSTONE_REMOTEPROC) += keystone_remoteproc.o
obj-$(CONFIG_QCOM_RPROC_COMMON) += qcom_common.o
obj-$(CONFIG_QCOM_Q6V5_COMMON) += qcom_q6v5.o
+obj-$(CONFIG_QCOM_Q6V5_MSS) += qcom_q6v5_mss.o
obj-$(CONFIG_QCOM_Q6V5_PAS) += qcom_q6v5_pas.o
-obj-$(CONFIG_QCOM_Q6V5_PIL) += qcom_q6v5_pil.o
obj-$(CONFIG_QCOM_Q6V5_WCSS) += qcom_q6v5_wcss.o
obj-$(CONFIG_QCOM_SYSMON) += qcom_sysmon.o
obj-$(CONFIG_QCOM_WCNSS_PIL) += qcom_wcnss_pil.o
--
2.18.0
next prev parent reply other threads:[~2018-09-14 17:33 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-09-14 17:35 [PATCH v2 0/2] remoteproc: qcom: Rename adsp and mss drivers Bjorn Andersson
2018-09-14 17:35 ` [PATCH v2 1/2] remoteproc: qcom: Rename Hexagon v5 PAS driver Bjorn Andersson
2018-09-18 16:23 ` Niklas Cassel
2018-09-14 17:35 ` Bjorn Andersson [this message]
2018-09-18 16:26 ` [PATCH v2 2/2] remoteproc: qcom: Rename Hexagon v5 modem driver Niklas Cassel
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180914173552.20370-3-bjorn.andersson@linaro.org \
--to=bjorn.andersson@linaro.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-remoteproc@vger.kernel.org \
--cc=niklas.cassel@linaro.org \
--cc=ohad@wizery.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).