From: Guo Ren <ren_guo@c-sky.com> To: tglx@linutronix.de, daniel.lezcano@linaro.org, robh+dt@kernel.org, mark.rutland@arm.com Cc: linux-kernel@vger.kernel.org, devicetree@vger.kernel.org, Guo Ren <ren_guo@c-sky.com> Subject: [PATCH V5 2/2] dt-bindings: timer: C-SKY Multi-processor timer Date: Sun, 16 Sep 2018 17:13:58 +0800 [thread overview] Message-ID: <25c2f8b500de638952fa677a983781e3e7e6be73.1537089130.git.ren_guo@c-sky.com> (raw) In-Reply-To: <dce7c1bc36ba39635b0ae5fd3d9b30172936727d.1537089130.git.ren_guo@c-sky.com> In-Reply-To: <dce7c1bc36ba39635b0ae5fd3d9b30172936727d.1537089130.git.ren_guo@c-sky.com> Signed-off-by: Guo Ren <ren_guo@c-sky.com> --- .../devicetree/bindings/timer/csky,mptimer.txt | 46 ++++++++++++++++++++++ 1 file changed, 46 insertions(+) create mode 100644 Documentation/devicetree/bindings/timer/csky,mptimer.txt diff --git a/Documentation/devicetree/bindings/timer/csky,mptimer.txt b/Documentation/devicetree/bindings/timer/csky,mptimer.txt new file mode 100644 index 0000000..1e7e31d --- /dev/null +++ b/Documentation/devicetree/bindings/timer/csky,mptimer.txt @@ -0,0 +1,46 @@ +============================ +C-SKY Multi-processors Timer +============================ + +C-SKY multi-processors timer is designed for C-SKY SMP system and the +regs is accessed by cpu co-processor 4 registers with mtcr/mfcr. + + - PTIM_CTLR "cr<0, 14>" Control reg to start reset timer. + - PTIM_TSR "cr<1, 14>" Interrupt cleanup status reg. + - PTIM_CCVR "cr<3, 14>" Current counter value reg. + - PTIM_LVR "cr<6, 14>" Window value reg to triger next event. + +============================== +timer node bindings definition +============================== + + Description: Describes SMP timer + + PROPERTIES + + - compatible + Usage: required + Value type: <string> + Definition: must be "csky,mptimer" + - clocks + Usage: required + Value type: <node> + Definition: must be input clk node + - interrupts + Usage: required + Value type: <u32> + Definition: must be timer irq num defined by soc + - interrupt-parent: + Usage: required + Value type: <node> + Definition: must be interrupt controller node + +Examples: +--------- + + timer: timer { + compatible = "csky,mptimer"; + clocks = <&dummy_apb_clk>; + interrupts = <16>; + interrupt-parent = <&intc>; + }; -- 2.7.4
WARNING: multiple messages have this Message-ID (diff)
From: Guo Ren <ren_guo@c-sky.com> To: tglx@linutronix.de, jason@lakedaemon.net, marc.zyngier@arm.com, robh+dt@kernel.org, mark.rutland@arm.com Cc: linux-kernel@vger.kernel.org, devicetree@vger.kernel.org, Guo Ren <ren_guo@c-sky.com> Subject: [PATCH V5 2/2] dt-bindings: timer: C-SKY Multi-processor timer Date: Sun, 16 Sep 2018 17:29:05 +0800 [thread overview] Message-ID: <25c2f8b500de638952fa677a983781e3e7e6be73.1537089130.git.ren_guo@c-sky.com> (raw) Message-ID: <20180916092905.WvQueaWuq9hSsI5-HaI_WSGDUa0GWyYTW09mTO6vXDs@z> (raw) In-Reply-To: <dce7c1bc36ba39635b0ae5fd3d9b30172936727d.1537089130.git.ren_guo@c-sky.com> In-Reply-To: <dce7c1bc36ba39635b0ae5fd3d9b30172936727d.1537089130.git.ren_guo@c-sky.com> Signed-off-by: Guo Ren <ren_guo@c-sky.com> --- .../devicetree/bindings/timer/csky,mptimer.txt | 46 ++++++++++++++++++++++ 1 file changed, 46 insertions(+) create mode 100644 Documentation/devicetree/bindings/timer/csky,mptimer.txt diff --git a/Documentation/devicetree/bindings/timer/csky,mptimer.txt b/Documentation/devicetree/bindings/timer/csky,mptimer.txt new file mode 100644 index 0000000..1e7e31d --- /dev/null +++ b/Documentation/devicetree/bindings/timer/csky,mptimer.txt @@ -0,0 +1,46 @@ +============================ +C-SKY Multi-processors Timer +============================ + +C-SKY multi-processors timer is designed for C-SKY SMP system and the +regs is accessed by cpu co-processor 4 registers with mtcr/mfcr. + + - PTIM_CTLR "cr<0, 14>" Control reg to start reset timer. + - PTIM_TSR "cr<1, 14>" Interrupt cleanup status reg. + - PTIM_CCVR "cr<3, 14>" Current counter value reg. + - PTIM_LVR "cr<6, 14>" Window value reg to triger next event. + +============================== +timer node bindings definition +============================== + + Description: Describes SMP timer + + PROPERTIES + + - compatible + Usage: required + Value type: <string> + Definition: must be "csky,mptimer" + - clocks + Usage: required + Value type: <node> + Definition: must be input clk node + - interrupts + Usage: required + Value type: <u32> + Definition: must be timer irq num defined by soc + - interrupt-parent: + Usage: required + Value type: <node> + Definition: must be interrupt controller node + +Examples: +--------- + + timer: timer { + compatible = "csky,mptimer"; + clocks = <&dummy_apb_clk>; + interrupts = <16>; + interrupt-parent = <&intc>; + }; -- 2.7.4
next prev parent reply other threads:[~2018-09-16 9:14 UTC|newest] Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top 2018-09-16 9:13 [PATCH V5 1/2] clocksource: add C-SKY SMP timer Guo Ren 2018-09-16 9:13 ` Guo Ren [this message] 2018-09-16 9:29 ` [PATCH V5 2/2] dt-bindings: timer: C-SKY Multi-processor timer Guo Ren 2018-09-16 9:29 ` [PATCH V5 1/2] clocksource: add C-SKY SMP timer Guo Ren 2018-09-16 9:29 ` [PATCH V5 1/2] clocksource: add gx6605s SOC system timer Guo Ren 2018-09-16 9:29 ` [PATCH V5 2/2] dt-bindings: timer: gx6605s SOC timer Guo Ren 2018-09-16 9:36 ` [PATCH V5 1/2] clocksource: add C-SKY SMP timer Guo Ren
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=25c2f8b500de638952fa677a983781e3e7e6be73.1537089130.git.ren_guo@c-sky.com \ --to=ren_guo@c-sky.com \ --cc=daniel.lezcano@linaro.org \ --cc=devicetree@vger.kernel.org \ --cc=linux-kernel@vger.kernel.org \ --cc=mark.rutland@arm.com \ --cc=robh+dt@kernel.org \ --cc=tglx@linutronix.de \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).