From: Jae Hyun Yoo <jae.hyun.yoo@linux.intel.com>
To: Lee Jones <lee.jones@linaro.org>,
Rob Herring <robh+dt@kernel.org>,
Jean Delvare <jdelvare@suse.com>,
Guenter Roeck <linux@roeck-us.net>,
Mark Rutland <mark.rutland@arm.com>,
Joel Stanley <joel@jms.id.au>, Andrew Jeffery <andrew@aj.id.au>,
Jonathan Corbet <corbet@lwn.net>,
Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
Gustavo Pimentel <gustavo.pimentel@synopsys.com>,
Kishon Vijay Abraham I <kishon@ti.com>,
Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>,
"Darrick J . Wong" <darrick.wong@oracle.com>,
Eric Sandeen <sandeen@redhat.com>, Arnd Bergmann <arnd@arndb.de>,
Wu Hao <hao.wu@intel.com>,
Tomohiro Kusumi <kusumi.tomohiro@gmail.com>,
"Bryant G . Ly" <bryantly@linux.vnet.ibm.com>,
Frederic Barrat <fbarrat@linux.vnet.ibm.com>,
"David S . Miller" <davem@davemloft.net>,
Mauro Carvalho Chehab <mchehab+samsung@kernel.org>,
Andrew Morton <akpm@linux-foundation.org>,
Randy Dunlap <rdunlap@infradead.org>,
Philippe Ombredanne <pombredanne@nexb.com>,
Vinod Koul <vkoul@kernel.org>,
Stephen Boyd <sboyd@codeaurora.org>,
David Kershner <david.kershner@unisys.com>,
Uwe Kleine-Konig <u.kleine-koenig@pengutronix.de>,
Sagar Dharia <sdharia@codeaurora.org>,
Johan Hovold <johan@kernel.org>,
Thomas Gleixner <tglx@linutronix.de>,
Juergen Gross <jgross@suse.com>,
Cyrille Pitchen <cyrille.pitchen@wedev4u.fr>
Cc: linux-hwmon@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
linux-aspeed@lists.ozlabs.org, linux-doc@vger.kernel.org,
openbmc@lists.ozlabs.org,
Jae Hyun Yoo <jae.hyun.yoo@linux.intel.com>,
Benjamin Herrenschmidt <benh@kernel.crashing.org>,
Jason M Biils <jason.m.bills@linux.intel.com>,
Milton Miller II <miltonm@us.ibm.com>,
Pavel Machek <pavel@ucw.cz>, Robin Murphy <robin.murphy@arm.com>,
Ryan Chen <ryan_chen@aspeedtech.com>
Subject: [PATCH v8 04/12] dt-bindings: Add a document of PECI adapter driver for ASPEED AST24xx/25xx SoCs
Date: Tue, 18 Sep 2018 14:51:16 -0700 [thread overview]
Message-ID: <20180918215124.14003-5-jae.hyun.yoo@linux.intel.com> (raw)
In-Reply-To: <20180918215124.14003-1-jae.hyun.yoo@linux.intel.com>
This commit adds a dt-bindings document of PECI adapter driver for ASPEED
AST24xx/25xx SoCs.
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Joel Stanley <joel@jms.id.au>
Cc: Andrew Jeffery <andrew@aj.id.au>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Jason M Biils <jason.m.bills@linux.intel.com>
Cc: Milton Miller II <miltonm@us.ibm.com>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Robin Murphy <robin.murphy@arm.com>
Cc: Ryan Chen <ryan_chen@aspeedtech.com>
Signed-off-by: Jae Hyun Yoo <jae.hyun.yoo@linux.intel.com>
Reviewed-by: Haiyue Wang <haiyue.wang@linux.intel.com>
Reviewed-by: James Feist <james.feist@linux.intel.com>
Reviewed-by: Vernon Mauery <vernon.mauery@linux.intel.com>
Reviewed-by: Rob Herring <robh@kernel.org>
---
.../devicetree/bindings/peci/peci-aspeed.txt | 55 +++++++++++++++++++
1 file changed, 55 insertions(+)
create mode 100644 Documentation/devicetree/bindings/peci/peci-aspeed.txt
diff --git a/Documentation/devicetree/bindings/peci/peci-aspeed.txt b/Documentation/devicetree/bindings/peci/peci-aspeed.txt
new file mode 100644
index 000000000000..cdca73a3b7d8
--- /dev/null
+++ b/Documentation/devicetree/bindings/peci/peci-aspeed.txt
@@ -0,0 +1,55 @@
+Device tree configuration for PECI buses on the AST24XX and AST25XX SoCs.
+
+Required properties:
+- compatible : Should be one of:
+ "aspeed,ast2400-peci"
+ "aspeed,ast2500-peci"
+- reg : Should contain PECI controller registers location and
+ length.
+- #address-cells : Should be <1> required to define a client address.
+- #size-cells : Should be <0> required to define a client address.
+- interrupts : Should contain PECI controller interrupt.
+- clocks : Should contain clock source for PECI controller. Should
+ reference the external oscillator clock in the second
+ cell.
+- resets : Should contain phandle to reset controller with the reset
+ number in the second cell.
+- clock-frequency : Should contain the operation frequency of PECI controller
+ in units of Hz.
+ 187500 ~ 24000000
+
+Optional properties:
+- msg-timing : Message timing negotiation period. This value will
+ determine the period of message timing negotiation to be
+ issued by PECI controller. The unit of the programmed
+ value is four times of PECI clock period.
+ 0 ~ 255 (default: 1)
+- addr-timing : Address timing negotiation period. This value will
+ determine the period of address timing negotiation to be
+ issued by PECI controller. The unit of the programmed
+ value is four times of PECI clock period.
+ 0 ~ 255 (default: 1)
+- rd-sampling-point : Read sampling point selection. The whole period of a bit
+ time will be divided into 16 time frames. This value will
+ determine the time frame in which the controller will
+ sample PECI signal for data read back. Usually in the
+ middle of a bit time is the best.
+ 0 ~ 15 (default: 8)
+- cmd-timeout-ms : Command timeout in units of ms.
+ 1 ~ 60000 (default: 1000)
+
+Example:
+ peci0: peci-bus@0 {
+ compatible = "aspeed,ast2500-peci";
+ reg = <0x0 0x60>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <15>;
+ clocks = <&syscon ASPEED_CLK_GATE_REFCLK>;
+ resets = <&syscon ASPEED_RESET_PECI>;
+ clock-frequency = <24000000>;
+ msg-timing = <1>;
+ addr-timing = <1>;
+ rd-sampling-point = <8>;
+ cmd-timeout-ms = <1000>;
+ };
--
2.18.0
next prev parent reply other threads:[~2018-09-18 21:52 UTC|newest]
Thread overview: 23+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-09-18 21:51 [PATCH v8 00/12] PECI device driver introduction Jae Hyun Yoo
2018-09-18 21:51 ` [PATCH v8 01/12] dt-bindings: Add a document of PECI subsystem Jae Hyun Yoo
2018-09-27 15:10 ` Rob Herring
2018-09-27 16:27 ` Jae Hyun Yoo
2018-09-18 21:51 ` [PATCH v8 02/12] Documentation: ioctl: Add ioctl numbers for " Jae Hyun Yoo
2018-09-18 21:51 ` [PATCH v8 03/12] peci: Add support for PECI bus driver core Jae Hyun Yoo
2018-09-18 21:51 ` Jae Hyun Yoo [this message]
2018-09-18 21:51 ` [PATCH v8 05/12] ARM: dts: aspeed: peci: Add PECI node Jae Hyun Yoo
2018-09-18 21:51 ` [PATCH v8 06/12] peci: Add a PECI adapter driver for Aspeed AST24xx/AST25xx Jae Hyun Yoo
2018-09-18 21:51 ` [PATCH v8 07/12] dt-bindings: mfd: Add a document for PECI client MFD Jae Hyun Yoo
2018-09-27 15:15 ` Rob Herring
2018-09-27 16:28 ` Jae Hyun Yoo
2018-10-24 7:25 ` Lee Jones
2018-10-24 16:39 ` Jae Hyun Yoo
2018-09-18 21:51 ` [PATCH v8 08/12] mfd: intel-peci-client: Add PECI client MFD driver Jae Hyun Yoo
2018-10-24 10:59 ` Lee Jones
2018-10-24 21:10 ` Jae Hyun Yoo
2018-10-25 5:30 ` Lee Jones
2018-10-25 16:16 ` Jae Hyun Yoo
2018-09-18 21:51 ` [PATCH v8 09/12] Documentation: hwmon: Add documents for PECI hwmon client drivers Jae Hyun Yoo
2018-09-18 21:51 ` [PATCH v8 10/12] hwmon: Add PECI cputemp driver Jae Hyun Yoo
2018-09-18 21:51 ` [PATCH v8 11/12] hwmon: Add PECI dimmtemp driver Jae Hyun Yoo
2018-09-18 21:51 ` [PATCH v8 12/12] Add maintainers for the PECI subsystem Jae Hyun Yoo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180918215124.14003-5-jae.hyun.yoo@linux.intel.com \
--to=jae.hyun.yoo@linux.intel.com \
--cc=akpm@linux-foundation.org \
--cc=andrew@aj.id.au \
--cc=arnd@arndb.de \
--cc=benh@kernel.crashing.org \
--cc=bryantly@linux.vnet.ibm.com \
--cc=corbet@lwn.net \
--cc=cyrille.pitchen@wedev4u.fr \
--cc=darrick.wong@oracle.com \
--cc=davem@davemloft.net \
--cc=david.kershner@unisys.com \
--cc=devicetree@vger.kernel.org \
--cc=fbarrat@linux.vnet.ibm.com \
--cc=gregkh@linuxfoundation.org \
--cc=gustavo.pimentel@synopsys.com \
--cc=hao.wu@intel.com \
--cc=jason.m.bills@linux.intel.com \
--cc=jdelvare@suse.com \
--cc=jgross@suse.com \
--cc=joel@jms.id.au \
--cc=johan@kernel.org \
--cc=kishon@ti.com \
--cc=kusumi.tomohiro@gmail.com \
--cc=lee.jones@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-aspeed@lists.ozlabs.org \
--cc=linux-doc@vger.kernel.org \
--cc=linux-hwmon@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux@roeck-us.net \
--cc=lorenzo.pieralisi@arm.com \
--cc=mark.rutland@arm.com \
--cc=mchehab+samsung@kernel.org \
--cc=miltonm@us.ibm.com \
--cc=openbmc@lists.ozlabs.org \
--cc=pavel@ucw.cz \
--cc=pombredanne@nexb.com \
--cc=rdunlap@infradead.org \
--cc=robh+dt@kernel.org \
--cc=robin.murphy@arm.com \
--cc=ryan_chen@aspeedtech.com \
--cc=sandeen@redhat.com \
--cc=sboyd@codeaurora.org \
--cc=sdharia@codeaurora.org \
--cc=tglx@linutronix.de \
--cc=u.kleine-koenig@pengutronix.de \
--cc=vkoul@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).