From: Kishon Vijay Abraham I <kishon@ti.com>
To: Jingoo Han <jingoohan1@gmail.com>,
Joao Pinto <Joao.Pinto@synopsys.com>,
Bjorn Helgaas <bhelgaas@google.com>,
Rob Herring <robh+dt@kernel.org>,
Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>,
Murali Karicheri <m-karicheri2@ti.com>,
Kishon Vijay Abraham I <kishon@ti.com>,
<Gustavo.Pimentel@synopsys.com>
Cc: Mark Rutland <mark.rutland@arm.com>,
Santosh Shilimkar <ssantosh@kernel.org>,
Tero Kristo <t-kristo@ti.com>, Nishanth Menon <nm@ti.com>,
<linux-pci@vger.kernel.org>, <devicetree@vger.kernel.org>,
<linux-kernel@vger.kernel.org>,
<linux-arm-kernel@lists.infradead.org>
Subject: [RFC PATCH 20/40] PCI: keystone: Cleanup ks_pcie_link_up()
Date: Fri, 21 Sep 2018 15:51:35 +0530 [thread overview]
Message-ID: <20180921102155.22839-21-kishon@ti.com> (raw)
In-Reply-To: <20180921102155.22839-1-kishon@ti.com>
ks_pcie_link_up() uses registers from the designware core to get the
status of the link. Move the register defines to pcie-designware.h
and cleanup ks_pcie_link_up().
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
---
drivers/pci/controller/dwc/pci-keystone.c | 10 +++-------
drivers/pci/controller/dwc/pcie-designware.h | 4 ++++
2 files changed, 7 insertions(+), 7 deletions(-)
diff --git a/drivers/pci/controller/dwc/pci-keystone.c b/drivers/pci/controller/dwc/pci-keystone.c
index 728b1e0db314..240c39c58b0f 100644
--- a/drivers/pci/controller/dwc/pci-keystone.c
+++ b/drivers/pci/controller/dwc/pci-keystone.c
@@ -38,8 +38,6 @@
/* Application register defines */
#define LTSSM_EN_VAL BIT(0)
-#define LTSSM_STATE_MASK 0x1f
-#define LTSSM_STATE_L0 0x11
#define DBI_CS2 BIT(5)
#define OB_XLAT_EN_VAL BIT(1)
@@ -87,9 +85,6 @@
#define OB_OFFSET_HI(n) (0x204 + (8 * (n)))
-/* Config space registers */
-#define DEBUG0 0x728
-
/* PCIE controller device IDs */
#define PCIE_RC_K2HK 0xb008
#define PCIE_RC_K2E 0xb009
@@ -308,8 +303,9 @@ static int ks_pcie_link_up(struct dw_pcie *pci)
{
u32 val;
- val = dw_pcie_readl_dbi(pci, DEBUG0);
- return (val & LTSSM_STATE_MASK) == LTSSM_STATE_L0;
+ val = dw_pcie_readl_dbi(pci, PCIE_PORT_DEBUG0);
+ val &= PORT_LOGIC_LTSSM_STATE_MASK;
+ return (val == PORT_LOGIC_LTSSM_STATE_L0);
}
static void ks_pcie_quirk(struct pci_dev *dev)
diff --git a/drivers/pci/controller/dwc/pcie-designware.h b/drivers/pci/controller/dwc/pcie-designware.h
index 96126fd8403c..a4d939536faf 100644
--- a/drivers/pci/controller/dwc/pcie-designware.h
+++ b/drivers/pci/controller/dwc/pcie-designware.h
@@ -37,6 +37,10 @@
#define PORT_LINK_MODE_4_LANES (0x7 << 16)
#define PORT_LINK_MODE_8_LANES (0xf << 16)
+#define PCIE_PORT_DEBUG0 0x728
+#define PORT_LOGIC_LTSSM_STATE_MASK 0x1f
+#define PORT_LOGIC_LTSSM_STATE_L0 0x11
+
#define PCIE_LINK_WIDTH_SPEED_CONTROL 0x80C
#define PORT_LOGIC_SPEED_CHANGE (0x1 << 17)
#define PORT_LOGIC_LINK_WIDTH_MASK (0x1f << 8)
--
2.17.1
next prev parent reply other threads:[~2018-09-21 10:24 UTC|newest]
Thread overview: 47+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-09-21 10:21 [RFC PATCH 00/40] Cleanup pci-keystone.c and Add AM654 PCIe Support Kishon Vijay Abraham I
2018-09-21 10:21 ` [RFC PATCH 01/40] PCI: keystone: Use quirk to limit MRRS for K2G Kishon Vijay Abraham I
2018-09-21 10:21 ` [RFC PATCH 02/40] PCI: keystone: Use quirk to set MRRS for PCI host bridge Kishon Vijay Abraham I
2018-09-21 10:21 ` [RFC PATCH 03/40] PCI: keystone: Move dw_pcie_setup_rc out of ks_pcie_establish_link() Kishon Vijay Abraham I
2018-09-21 10:21 ` [RFC PATCH 04/40] PCI: keystone: Do not initiate link training multiple times Kishon Vijay Abraham I
2018-09-21 10:21 ` [RFC PATCH 05/40] PCI: keystone: Remove unused argument from ks_dw_pcie_host_init() Kishon Vijay Abraham I
2018-09-21 10:21 ` [RFC PATCH 06/40] PCI: keystone: Add start_link/stop_link dw_pcie_ops Kishon Vijay Abraham I
2018-09-21 10:21 ` [RFC PATCH 07/40] PCI: keystone: Merge pci-keystone-dw.c and pci-keystone.c Kishon Vijay Abraham I
2018-09-21 10:21 ` [RFC PATCH 08/40] PCI: keystone: Cleanup MSI/legacy interrupt configuration and handling Kishon Vijay Abraham I
2021-07-03 21:01 ` Krzysztof Wilczyński
2021-07-05 8:21 ` Kishon Vijay Abraham I
2021-07-06 20:34 ` Krzysztof Wilczyński
2018-09-21 10:21 ` [RFC PATCH 09/40] PCI: keystone: Remove redundant platform_set_drvdata Kishon Vijay Abraham I
2018-09-21 10:21 ` [RFC PATCH 10/40] PCI: keystone: Use uniform function naming convention Kishon Vijay Abraham I
2018-09-21 10:21 ` [RFC PATCH 11/40] dt-bindings: PCI: keystone: Add bindings to get device control module Kishon Vijay Abraham I
2018-09-21 10:21 ` [RFC PATCH 12/40] PCI: keystone: Use syscon APIs to get device id from " Kishon Vijay Abraham I
2018-09-21 10:21 ` [RFC PATCH 13/40] dt-bindings: PCI: keystone: Add "reg-names" binding information Kishon Vijay Abraham I
[not found] ` <5baa1b0e.1c69fb81.4f57b.32f7@mx.google.com>
2018-11-02 7:19 ` Kishon Vijay Abraham I
2018-09-21 10:21 ` [RFC PATCH 14/40] PCI: keystone: Use platform_get_resource_byname to get memory resources Kishon Vijay Abraham I
2018-09-21 10:21 ` [RFC PATCH 15/40] PCI: keystone: Cleanup PHY handling Kishon Vijay Abraham I
2018-09-21 10:21 ` [RFC PATCH 16/40] PCI: keystone: Invoke pm_runtime APIs to enable clock Kishon Vijay Abraham I
2018-09-21 10:21 ` [RFC PATCH 17/40] PCI: keystone: Cleanup configuration space access Kishon Vijay Abraham I
2018-09-21 10:21 ` [RFC PATCH 18/40] PCI: keystone: Get number of OB windows from DT and cleanup MEM space configuration Kishon Vijay Abraham I
2018-09-21 10:21 ` [RFC PATCH 19/40] PCI: keystone: Cleanup set_dbi_mode and get_dbi_mode Kishon Vijay Abraham I
2018-09-21 10:21 ` Kishon Vijay Abraham I [this message]
2018-09-21 10:21 ` [RFC PATCH 21/40] PCI: keystone: Add debug error message for all errors Kishon Vijay Abraham I
2018-09-21 10:21 ` [RFC PATCH 22/40] PCI: keystone: Reorder header file in alphabetical order Kishon Vijay Abraham I
2018-09-21 10:21 ` [RFC PATCH 23/40] PCI: keystone: Cleanup macros defined in pci-keystone.c Kishon Vijay Abraham I
2018-09-21 10:21 ` [RFC PATCH 24/40] PCI: keystone: Move initializations to appropriate places Kishon Vijay Abraham I
2018-09-21 10:21 ` [RFC PATCH 25/40] dt-bindings: PCI: Add dt-binding to configure PCIe mode Kishon Vijay Abraham I
2018-09-21 10:21 ` [RFC PATCH 26/40] PCI: keystone: Explicitly set the " Kishon Vijay Abraham I
2018-09-21 10:21 ` [RFC PATCH 27/40] dt-bindings: PCI: Document "atu" reg-names Kishon Vijay Abraham I
2018-09-21 10:21 ` [RFC PATCH 28/40] PCI: dwc: Fix ATU identification for designware version >= 4.80 Kishon Vijay Abraham I
2018-09-21 10:21 ` [RFC PATCH 29/40] PCI: keystone: Prevent ARM32 specific code to be compiled for ARM64 Kishon Vijay Abraham I
2018-09-21 10:21 ` [RFC PATCH 30/40] dt-bindings: PCI: Add PCI RC dt binding documentation for AM654 Kishon Vijay Abraham I
2018-09-21 10:21 ` [RFC PATCH 31/40] PCI: keystone: Add support for PCIe in AM654x Platforms Kishon Vijay Abraham I
2018-09-21 10:21 ` [RFC PATCH 32/40] phy: core: Invoke pm_runtime_get_*/pm_runtime_put_* before invoking reset callback Kishon Vijay Abraham I
2018-09-21 10:21 ` [RFC PATCH 33/40] dt-bindings: phy: ti: Add dt binding documentation for SERDES in AM654x SoC Kishon Vijay Abraham I
2018-09-21 10:21 ` [RFC PATCH 34/40] phy: ti: Add a new SERDES driver for TI's " Kishon Vijay Abraham I
2018-09-21 10:21 ` [RFC PATCH 35/40] ARM: dts: keystone-k2e: Use the updated binding to describe PCIe in k2e Kishon Vijay Abraham I
2018-09-21 10:21 ` [RFC PATCH 36/40] arm64: dts: k3-am6: Add "socionext,synquacer-pre-its" property to gic_its Kishon Vijay Abraham I
2018-09-21 19:42 ` Nishanth Menon
2018-09-21 10:21 ` [RFC PATCH 37/40] arm64: dts: k3-am6: Add Main System Control Module node Kishon Vijay Abraham I
2018-09-21 10:21 ` [RFC PATCH 38/40] arm64: dts: k3-am6: Add mux-controller dt node required for muxing SERDES Kishon Vijay Abraham I
2018-09-21 10:21 ` [RFC PATCH 39/40] arm64: dts: k3-am6: Add SERDES DT node Kishon Vijay Abraham I
2018-09-21 10:21 ` [RFC PATCH 40/40] arm64: dts: k3-am6: Add Root Complex PCIe dt node Kishon Vijay Abraham I
2018-10-12 13:47 ` [RFC PATCH 00/40] Cleanup pci-keystone.c and Add AM654 PCIe Support Lorenzo Pieralisi
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180921102155.22839-21-kishon@ti.com \
--to=kishon@ti.com \
--cc=Gustavo.Pimentel@synopsys.com \
--cc=Joao.Pinto@synopsys.com \
--cc=bhelgaas@google.com \
--cc=devicetree@vger.kernel.org \
--cc=jingoohan1@gmail.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=lorenzo.pieralisi@arm.com \
--cc=m-karicheri2@ti.com \
--cc=mark.rutland@arm.com \
--cc=nm@ti.com \
--cc=robh+dt@kernel.org \
--cc=ssantosh@kernel.org \
--cc=t-kristo@ti.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).