From: Tomas Winkler <tomas.winkler@intel.com>
To: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>,
Jason Gunthorpe <jgg@ziepe.ca>
Cc: Alexander Usyskin <alexander.usyskin@intel.com>,
Tadeusz Struk <tadeusz.struk@intel.com>,
linux-integrity@vger.kernel.org,
linux-security-module@vger.kernel.org,
linux-kernel@vger.kernel.org,
Tomas Winkler <tomas.winkler@intel.com>
Subject: [PATCH v4 10/21] tpm: factor out tpm 1.x pm suspend flow into tpm1-cmd.c
Date: Fri, 21 Sep 2018 16:58:09 +0300 [thread overview]
Message-ID: <20180921135820.20549-11-tomas.winkler@intel.com> (raw)
In-Reply-To: <20180921135820.20549-1-tomas.winkler@intel.com>
Factor out TPM 1.x suspend flow from tpm-interface.c into a new function
tpm1_pm_suspend() in tpm1-cmd.c
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
---
V2-V3: Rebase
V4: 1. Add kdoc for tpm1_pm_suspend().
2. Fix commit message.
drivers/char/tpm/tpm-interface.c | 55 ++++---------------------------------
drivers/char/tpm/tpm.h | 1 +
drivers/char/tpm/tpm1-cmd.c | 59 ++++++++++++++++++++++++++++++++++++++++
3 files changed, 65 insertions(+), 50 deletions(-)
diff --git a/drivers/char/tpm/tpm-interface.c b/drivers/char/tpm/tpm-interface.c
index 7239ccc16e2f..dfa972bbdd81 100644
--- a/drivers/char/tpm/tpm-interface.c
+++ b/drivers/char/tpm/tpm-interface.c
@@ -585,15 +585,6 @@ int tpm_send(struct tpm_chip *chip, void *cmd, size_t buflen)
}
EXPORT_SYMBOL_GPL(tpm_send);
-#define TPM_ORD_SAVESTATE 152
-#define SAVESTATE_RESULT_SIZE 10
-
-static const struct tpm_input_header savestate_header = {
- .tag = cpu_to_be16(TPM_TAG_RQU_COMMAND),
- .length = cpu_to_be32(10),
- .ordinal = cpu_to_be32(TPM_ORD_SAVESTATE)
-};
-
/*
* We are about to suspend. Save the TPM state
* so that it can be restored.
@@ -601,54 +592,18 @@ static const struct tpm_input_header savestate_header = {
int tpm_pm_suspend(struct device *dev)
{
struct tpm_chip *chip = dev_get_drvdata(dev);
- struct tpm_cmd_t cmd;
- int rc, try;
-
- u8 dummy_hash[TPM_DIGEST_SIZE] = { 0 };
+ int rc = 0;
- if (chip == NULL)
+ if (!chip)
return -ENODEV;
if (chip->flags & TPM_CHIP_FLAG_ALWAYS_POWERED)
return 0;
- if (chip->flags & TPM_CHIP_FLAG_TPM2) {
+ if (chip->flags & TPM_CHIP_FLAG_TPM2)
tpm2_shutdown(chip, TPM2_SU_STATE);
- return 0;
- }
-
- /* for buggy tpm, flush pcrs with extend to selected dummy */
- if (tpm_suspend_pcr)
- rc = tpm1_pcr_extend(chip, tpm_suspend_pcr, dummy_hash,
- "extending dummy pcr before suspend");
-
- /* now do the actual savestate */
- for (try = 0; try < TPM_RETRY; try++) {
- cmd.header.in = savestate_header;
- rc = tpm_transmit_cmd(chip, NULL, &cmd, SAVESTATE_RESULT_SIZE,
- 0, 0, NULL);
-
- /*
- * If the TPM indicates that it is too busy to respond to
- * this command then retry before giving up. It can take
- * several seconds for this TPM to be ready.
- *
- * This can happen if the TPM has already been sent the
- * SaveState command before the driver has loaded. TCG 1.2
- * specification states that any communication after SaveState
- * may cause the TPM to invalidate previously saved state.
- */
- if (rc != TPM_WARN_RETRY)
- break;
- tpm_msleep(TPM_TIMEOUT_RETRY);
- }
-
- if (rc)
- dev_err(&chip->dev,
- "Error (%d) sending savestate before suspend\n", rc);
- else if (try > 0)
- dev_warn(&chip->dev, "TPM savestate took %dms\n",
- try * TPM_TIMEOUT_RETRY);
+ else
+ rc = tpm1_pm_suspend(chip, tpm_suspend_pcr);
return rc;
}
diff --git a/drivers/char/tpm/tpm.h b/drivers/char/tpm/tpm.h
index fd945fc828b6..862c9262e037 100644
--- a/drivers/char/tpm/tpm.h
+++ b/drivers/char/tpm/tpm.h
@@ -543,6 +543,7 @@ ssize_t tpm_transmit_cmd(struct tpm_chip *chip, struct tpm_space *space,
int tpm_startup(struct tpm_chip *chip);
int tpm_get_timeouts(struct tpm_chip *);
+int tpm1_pm_suspend(struct tpm_chip *chip, int tpm_suspend_pcr);
int tpm1_do_selftest(struct tpm_chip *chip);
int tpm1_auto_startup(struct tpm_chip *chip);
int tpm1_get_timeouts(struct tpm_chip *chip);
diff --git a/drivers/char/tpm/tpm1-cmd.c b/drivers/char/tpm/tpm1-cmd.c
index 8ecda2cd3734..d118adbcd2a7 100644
--- a/drivers/char/tpm/tpm1-cmd.c
+++ b/drivers/char/tpm/tpm1-cmd.c
@@ -667,3 +667,62 @@ int tpm1_auto_startup(struct tpm_chip *chip)
rc = -ENODEV;
return rc;
}
+
+#define TPM_ORD_SAVESTATE 152
+#define SAVESTATE_RESULT_SIZE 10
+static const struct tpm_input_header savestate_header = {
+ .tag = cpu_to_be16(TPM_TAG_RQU_COMMAND),
+ .length = cpu_to_be32(10),
+ .ordinal = cpu_to_be32(TPM_ORD_SAVESTATE)
+};
+
+/**
+ * tpm1_pm_suspend() - pm suspend handler
+ * The functions saves the TPM state to be restored on resume.
+ *
+ * @chip: TPM chip to use.
+ * @tpm_suspend_pcr: flush pcr for buggy TPM chips.
+ *
+ * Return: 0 on success, < 0 on error.
+ */
+int tpm1_pm_suspend(struct tpm_chip *chip, int tpm_suspend_pcr)
+{
+ u8 dummy_hash[TPM_DIGEST_SIZE] = { 0 };
+ struct tpm_cmd_t cmd;
+ int rc, try;
+
+ /* for buggy tpm, flush pcrs with extend to selected dummy */
+ if (tpm_suspend_pcr)
+ rc = tpm1_pcr_extend(chip, tpm_suspend_pcr, dummy_hash,
+ "extending dummy pcr before suspend");
+
+ /* now do the actual savestate */
+ for (try = 0; try < TPM_RETRY; try++) {
+ cmd.header.in = savestate_header;
+ rc = tpm_transmit_cmd(chip, NULL, &cmd, SAVESTATE_RESULT_SIZE,
+ 0, 0, NULL);
+
+ /*
+ * If the TPM indicates that it is too busy to respond to
+ * this command then retry before giving up. It can take
+ * several seconds for this TPM to be ready.
+ *
+ * This can happen if the TPM has already been sent the
+ * SaveState command before the driver has loaded. TCG 1.2
+ * specification states that any communication after SaveState
+ * may cause the TPM to invalidate previously saved state.
+ */
+ if (rc != TPM_WARN_RETRY)
+ break;
+ tpm_msleep(TPM_TIMEOUT_RETRY);
+ }
+
+ if (rc)
+ dev_err(&chip->dev, "Error (%d) sending savestate before suspend\n",
+ rc);
+ else if (try > 0)
+ dev_warn(&chip->dev, "TPM savestate took %dms\n",
+ try * TPM_TIMEOUT_RETRY);
+
+ return rc;
+}
--
2.14.4
next prev parent reply other threads:[~2018-09-21 14:02 UTC|newest]
Thread overview: 38+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-09-21 13:57 [PATCH v4 00/21] tpm: separate tpm 1.x and tpm 2.x commands Tomas Winkler
2018-09-21 13:58 ` [PATCH v4 01/21] tpm2: add new tpm2 commands according to TCG 1.36 Tomas Winkler
2018-09-25 14:13 ` Jarkko Sakkinen
2018-09-26 6:44 ` Nayna Jain
2018-09-21 13:58 ` [PATCH v4 02/21] tpm: sort objects in the Makefile Tomas Winkler
2018-09-25 14:14 ` Jarkko Sakkinen
2018-09-21 13:58 ` [PATCH v4 03/21] tpm: factor out tpm 1.x duration calculation to tpm1-cmd.c Tomas Winkler
2018-09-25 14:17 ` Jarkko Sakkinen
2018-09-26 7:01 ` Nayna Jain
2018-09-21 13:58 ` [PATCH v4 04/21] tpm: add tpm_calc_ordinal_duration() wrapper Tomas Winkler
2018-09-21 13:58 ` [PATCH v4 05/21] tpm: factor out tpm_get_timeouts() Tomas Winkler
2018-09-25 14:19 ` Jarkko Sakkinen
2018-09-21 13:58 ` [PATCH v4 06/21] tpm: move tpm1_pcr_extend to tpm1-cmd.c Tomas Winkler
2018-09-21 13:58 ` [PATCH v4 07/21] tpm: move tpm_getcap " Tomas Winkler
2018-09-21 13:58 ` [PATCH v4 08/21] tpm: factor out tpm1_get_random into tpm1-cmd.c Tomas Winkler
2018-09-21 13:58 ` [PATCH v4 09/21] tpm: move tpm 1.x selftest code from tpm-interface.c tpm1-cmd.c Tomas Winkler
2018-09-25 14:26 ` Jarkko Sakkinen
2018-09-21 13:58 ` Tomas Winkler [this message]
2018-09-25 14:31 ` [PATCH v4 10/21] tpm: factor out tpm 1.x pm suspend flow into tpm1-cmd.c Jarkko Sakkinen
2018-09-21 13:58 ` [PATCH v4 11/21] tpm: factor out tpm_startup function Tomas Winkler
2018-09-24 14:51 ` Nayna Jain
2018-09-24 22:35 ` Jarkko Sakkinen
2018-09-21 13:58 ` [PATCH v4 12/21] tpm: move pcr extend code to tpm2-cmd.c Tomas Winkler
2018-09-21 13:58 ` [PATCH v4 13/21] tpm: add tpm_auto_startup() into tpm-interface.c Tomas Winkler
2018-09-21 13:58 ` [PATCH v4 14/21] tpm: tpm-interface.c drop unused macros Tomas Winkler
2018-09-25 14:39 ` Jarkko Sakkinen
2018-09-21 13:58 ` [PATCH v4 15/21] tpm: tpm-space.c remove unneeded semicolon Tomas Winkler
2018-09-21 13:58 ` [PATCH v4 16/21] tpm: tpm1: rewrite tpm1_get_random() using tpm_buf structure Tomas Winkler
2018-09-21 13:58 ` [PATCH v4 17/21] tpm1: implement tpm1_pcr_read_dev() " Tomas Winkler
2018-09-21 13:58 ` [PATCH v4 18/21] tmp1: rename tpm1_pcr_read_dev to tpm1_pcr_read() Tomas Winkler
2018-09-25 14:39 ` Jarkko Sakkinen
2018-09-21 13:58 ` [PATCH v4 19/21] tpm1: reimplement SAVESTATE using tpm_buf Tomas Winkler
2018-09-21 13:58 ` [PATCH v4 20/21] tpm1: reimplement tpm1_continue_selftest() " Tomas Winkler
2018-09-25 10:23 ` Nayna Jain
2018-09-25 14:25 ` Jarkko Sakkinen
2018-09-25 14:28 ` Jarkko Sakkinen
2018-09-21 13:58 ` [PATCH v4 21/21] tpm: use u32 instead of int for PCR index Tomas Winkler
2018-09-25 14:41 ` Jarkko Sakkinen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180921135820.20549-11-tomas.winkler@intel.com \
--to=tomas.winkler@intel.com \
--cc=alexander.usyskin@intel.com \
--cc=jarkko.sakkinen@linux.intel.com \
--cc=jgg@ziepe.ca \
--cc=linux-integrity@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-security-module@vger.kernel.org \
--cc=tadeusz.struk@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).