linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Paolo Bonzini <pbonzini@redhat.com>
To: gregkh@linux-foundation.org
Cc: linux-kernel@vger.kernel.org, rkrcmar@redhat.com, kvm@vger.kernel.org
Subject: [GIT PULL] KVM changes for Linux 4.19-rc5
Date: Fri, 21 Sep 2018 16:06:06 +0200	[thread overview]
Message-ID: <1537538766-8252-1-git-send-email-pbonzini@redhat.com> (raw)

Greg,

The following changes since commit 7876320f88802b22d4e2daf7eb027dd14175a0f8:

  Linux 4.19-rc4 (2018-09-16 11:52:37 -0700)

are available in the git repository at:

  git://git.kernel.org/pub/scm/virt/kvm/kvm.git tags/for-linus

for you to fetch changes up to 26b471c7e2f7befd0f59c35b257749ca57e0ed70:

  KVM: nVMX: Fix bad cleanup on error of get/set nested state IOCTLs (2018-09-20 18:54:08 +0200)

----------------------------------------------------------------
This pull request is slightly bigger than usual at this stage, but
I swear I would have sent it the same to Linus!  The main cause for
this is that I was on vacation until two weeks ago and it took a while
to sort all the pending patches between 4.19 and 4.20, test them and
so on.

It's mostly small bugfixes and cleanups, mostly around x86 nested
virtualization.  One important change, not related to nested
virtualization, is that the ability for the guest kernel to trap CPUID
instructions (in Linux that's the ARCH_SET_CPUID arch_prctl) is now
masked by default.  This is because the feature is detected through an
MSR; a very bad idea that Intel seems to like more and more.  Some
applications choke if the other fields of that MSR are not initialized
as on real hardware, hence we have to disable the whole MSR by default,
as was the case before Linux 4.12.

----------------------------------------------------------------
Alexey Kardashevskiy (1):
      KVM: PPC: Avoid marking DMA-mapped pages dirty in real mode

Andy Shevchenko (1):
      KVM: SVM: Switch to bitmap_zalloc()

Drew Schmitt (3):
      KVM: x86: Turbo bits in MSR_PLATFORM_INFO
      KVM: x86: Control guest reads of MSR_PLATFORM_INFO
      kvm: selftests: Add platform_info_test

Janosch Frank (2):
      s390/mm: Check for valid vma before zapping in gmap_discard
      KVM: s390: Make huge pages unavailable in ucontrol VMs

Junaid Shahid (1):
      kvm: mmu: Don't read PDPTEs when paging is not enabled

Krish Sadhukhan (2):
      nVMX x86: check posted-interrupt descriptor addresss on vmentry of L2
      nVMX x86: Check VPID value on vmentry of L2 guests

Lei Yang (1):
      kvm: selftests: use -pthread instead of -lpthread

Liran Alon (2):
      KVM: nVMX: Wake blocked vCPU in guest-mode if pending interrupt in virtual APICv
      KVM: nVMX: Fix bad cleanup on error of get/set nested state IOCTLs

Nicholas Piggin (1):
      KVM: PPC: Book3S HV: Don't use compound_order to determine host mapping size

Paolo Bonzini (3):
      Merge tag 'kvm-s390-master-4.19-2' of git://git.kernel.org/.../kvms390/linux into HEAD
      Merge tag 'kvm-ppc-fixes-4.19-2' of git://git.kernel.org/.../paulus/powerpc into HEAD
      KVM: VMX: check nested state and CR4.VMXE against SMM

Sean Christopherson (3):
      KVM: VMX: immediately mark preemption timer expired only for zero value
      KVM: VMX: modify preemption timer bit only when arming timer
      KVM: VMX: use preemption timer to force immediate VMExit

Sebastian Andrzej Siewior (1):
      kvm: x86: make kvm_{load|put}_guest_fpu() static

Tianyu Lan (1):
      KVM/MMU: Fix comment in walk_shadow_page_lockless_end()

Vitaly Kuznetsov (2):
      x86/kvm/lapic: always disable MMIO interface in x2APIC mode
      x86/hyper-v: rename ipi_arg_{ex,non_ex} structures

Wei Yang (1):
      KVM: x86: don't reset root in kvm_mmu_setup()

 Documentation/virtual/kvm/api.txt                |  12 +-
 arch/powerpc/include/asm/book3s/64/pgtable.h     |   1 -
 arch/powerpc/include/asm/iommu.h                 |   2 -
 arch/powerpc/include/asm/mmu_context.h           |   1 +
 arch/powerpc/kernel/iommu.c                      |  25 ----
 arch/powerpc/kvm/book3s_64_mmu_radix.c           |  91 ++++++---------
 arch/powerpc/kvm/book3s_64_vio_hv.c              |  39 +++++--
 arch/powerpc/mm/init_64.c                        |  49 --------
 arch/powerpc/mm/mmu_context_iommu.c              |  34 +++++-
 arch/s390/kvm/kvm-s390.c                         |   4 +-
 arch/s390/mm/gmap.c                              |   4 +-
 arch/x86/hyperv/hv_apic.c                        |   8 +-
 arch/x86/include/asm/hyperv-tlfs.h               |  16 +--
 arch/x86/include/asm/kvm_host.h                  |   5 +
 arch/x86/include/uapi/asm/kvm.h                  |   1 +
 arch/x86/kvm/lapic.c                             |  22 +++-
 arch/x86/kvm/mmu.c                               |   9 +-
 arch/x86/kvm/svm.c                               |   7 +-
 arch/x86/kvm/vmx.c                               | 138 ++++++++++++++++-------
 arch/x86/kvm/x86.c                               | 101 +++++++++++------
 include/linux/kvm_host.h                         |   2 -
 include/uapi/linux/kvm.h                         |   1 +
 tools/testing/selftests/kvm/.gitignore           |   1 +
 tools/testing/selftests/kvm/Makefile             |   5 +-
 tools/testing/selftests/kvm/include/kvm_util.h   |   4 +
 tools/testing/selftests/kvm/lib/kvm_util.c       |  89 +++++++++++++++
 tools/testing/selftests/kvm/platform_info_test.c | 110 ++++++++++++++++++
 27 files changed, 537 insertions(+), 244 deletions(-)
 create mode 100644 tools/testing/selftests/kvm/platform_info_test.c

             reply	other threads:[~2018-09-21 14:06 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-09-21 14:06 Paolo Bonzini [this message]
2018-09-21 16:25 ` [GIT PULL] KVM changes for Linux 4.19-rc5 Greg KH
  -- strict thread matches above, loose matches on Subject: below --
2018-09-21 14:05 Paolo Bonzini

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1537538766-8252-1-git-send-email-pbonzini@redhat.com \
    --to=pbonzini@redhat.com \
    --cc=gregkh@linux-foundation.org \
    --cc=kvm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=rkrcmar@redhat.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).