From: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
To: <lorenzo.pieralisi@arm.com>, <robin.murphy@arm.com>
Cc: <will.deacon@arm.com>, <mark.rutland@arm.com>,
<guohanjun@huawei.com>, <john.garry@huawei.com>,
<pabba@codeaurora.org>, <vkilari@codeaurora.org>,
<rruigrok@codeaurora.org>, <linux-acpi@vger.kernel.org>,
<linux-kernel@vger.kernel.org>,
<linux-arm-kernel@lists.infradead.org>, <linuxarm@huawei.com>,
<neil.m.leeder@gmail.com>
Subject: [PATCH v3 3/3] perf/smmuv3: Add MSI irq support
Date: Fri, 21 Sep 2018 16:08:03 +0100 [thread overview]
Message-ID: <20180921150803.25444-4-shameerali.kolothum.thodi@huawei.com> (raw)
In-Reply-To: <20180921150803.25444-1-shameerali.kolothum.thodi@huawei.com>
This adds support for MSI-based counter overflow interrupt.
Signed-off-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
---
drivers/perf/arm_smmuv3_pmu.c | 58 +++++++++++++++++++++++++++++++++++++++++++
1 file changed, 58 insertions(+)
diff --git a/drivers/perf/arm_smmuv3_pmu.c b/drivers/perf/arm_smmuv3_pmu.c
index 2fa6c96..84f7907 100644
--- a/drivers/perf/arm_smmuv3_pmu.c
+++ b/drivers/perf/arm_smmuv3_pmu.c
@@ -57,6 +57,7 @@
#define SMMU_PMCG_OVSSET0 0xCC0
#define SMMU_PMCG_CFGR 0xE00
#define SMMU_PMCG_CFGR_RELOC_CTRS BIT(20)
+#define SMMU_PMCG_CFGR_MSI BIT(21)
#define SMMU_PMCG_CFGR_SIZE_MASK GENMASK(13, 8)
#define SMMU_PMCG_CFGR_NCTR_MASK GENMASK(5, 0)
#define SMMU_PMCG_CR 0xE04
@@ -66,6 +67,12 @@
#define SMMU_PMCG_IRQ_CTRL 0xE50
#define SMMU_PMCG_IRQ_CTRL_IRQEN BIT(0)
#define SMMU_PMCG_IRQ_CFG0 0xE58
+#define SMMU_PMCG_IRQ_CFG1 0xE60
+#define SMMU_PMCG_IRQ_CFG2 0xE64
+
+/* MSI config fields */
+#define MSI_CFG0_ADDR_MASK GENMASK_ULL(51, 2)
+#define MSI_CFG2_MEMATTR_DEVICE_nGnRE 0x1
#define SMMU_DEFAULT_FILTER_SPAN 1
#define SMMU_DEFAULT_FILTER_STREAM_ID GENMASK(31, 0)
@@ -548,11 +555,62 @@ static irqreturn_t smmu_pmu_handle_irq(int irq_num, void *data)
return IRQ_HANDLED;
}
+static void smmu_pmu_free_msis(void *data)
+{
+ struct device *dev = data;
+
+ platform_msi_domain_free_irqs(dev);
+}
+
+static void smmu_pmu_write_msi_msg(struct msi_desc *desc, struct msi_msg *msg)
+{
+ phys_addr_t doorbell;
+ struct device *dev = msi_desc_to_dev(desc);
+ struct smmu_pmu *pmu = dev_get_drvdata(dev);
+
+ doorbell = (((u64)msg->address_hi) << 32) | msg->address_lo;
+ doorbell &= MSI_CFG0_ADDR_MASK;
+
+ writeq_relaxed(doorbell, pmu->reg_base + SMMU_PMCG_IRQ_CFG0);
+ writel_relaxed(msg->data, pmu->reg_base + SMMU_PMCG_IRQ_CFG1);
+ writel_relaxed(MSI_CFG2_MEMATTR_DEVICE_nGnRE,
+ pmu->reg_base + SMMU_PMCG_IRQ_CFG2);
+}
+
+static void smmu_pmu_setup_msi(struct smmu_pmu *pmu)
+{
+ struct msi_desc *desc;
+ struct device *dev = pmu->dev;
+ int ret;
+
+ /* Clear MSI address reg */
+ writeq_relaxed(0, pmu->reg_base + SMMU_PMCG_IRQ_CFG0);
+
+ /* MSI supported or not */
+ if (!(readl(pmu->reg_base + SMMU_PMCG_CFGR) & SMMU_PMCG_CFGR_MSI))
+ return;
+
+ ret = platform_msi_domain_alloc_irqs(dev, 1, smmu_pmu_write_msi_msg);
+ if (ret) {
+ dev_warn(dev, "failed to allocate MSIs\n");
+ return;
+ }
+
+ desc = first_msi_entry(dev);
+ if (desc)
+ pmu->irq = desc->irq;
+
+ /* Add callback to free MSIs on teardown */
+ devm_add_action(dev, smmu_pmu_free_msis, dev);
+}
+
static int smmu_pmu_setup_irq(struct smmu_pmu *pmu)
{
unsigned long flags = IRQF_NOBALANCING | IRQF_SHARED | IRQF_NO_THREAD;
int irq, ret = -ENXIO;
+ smmu_pmu_setup_msi(pmu);
+
irq = pmu->irq;
if (irq)
ret = devm_request_irq(pmu->dev, irq, smmu_pmu_handle_irq,
--
2.7.4
prev parent reply other threads:[~2018-09-21 15:10 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-09-21 15:08 [PATCH v3 0/3] arm64 SMMUv3 PMU driver with IORT support Shameer Kolothum
2018-09-21 15:08 ` [PATCH v3 1/3] acpi: arm64: add iort support for PMCG Shameer Kolothum
2018-10-04 16:43 ` Lorenzo Pieralisi
2018-10-04 17:35 ` Robin Murphy
2018-10-05 11:06 ` Shameerali Kolothum Thodi
2018-09-21 15:08 ` [PATCH v3 2/3] perf: add arm64 smmuv3 pmu driver Shameer Kolothum
2018-10-02 14:11 ` Jean-Philippe Brucker
2018-10-02 16:19 ` Jean-Philippe Brucker
2018-10-02 16:35 ` Robin Murphy
2018-10-03 8:52 ` Shameerali Kolothum Thodi
2018-10-03 8:46 ` Shameerali Kolothum Thodi
2018-10-03 9:46 ` Jean-Philippe Brucker
2018-10-03 10:21 ` Robin Murphy
2018-10-03 10:37 ` Robin Murphy
2018-10-03 11:28 ` Shameerali Kolothum Thodi
2018-10-03 11:06 ` John Garry
2018-10-11 11:25 ` Robin Murphy
2018-10-11 11:49 ` Shameerali Kolothum Thodi
2018-09-21 15:08 ` Shameer Kolothum [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180921150803.25444-4-shameerali.kolothum.thodi@huawei.com \
--to=shameerali.kolothum.thodi@huawei.com \
--cc=guohanjun@huawei.com \
--cc=john.garry@huawei.com \
--cc=linux-acpi@vger.kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linuxarm@huawei.com \
--cc=lorenzo.pieralisi@arm.com \
--cc=mark.rutland@arm.com \
--cc=neil.m.leeder@gmail.com \
--cc=pabba@codeaurora.org \
--cc=robin.murphy@arm.com \
--cc=rruigrok@codeaurora.org \
--cc=vkilari@codeaurora.org \
--cc=will.deacon@arm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).