linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Yong Wu <yong.wu@mediatek.com>
To: Joerg Roedel <joro@8bytes.org>,
	Matthias Brugger <matthias.bgg@gmail.com>,
	Robin Murphy <robin.murphy@arm.com>,
	Rob Herring <robh+dt@kernel.org>
Cc: Tomasz Figa <tfiga@google.com>, Will Deacon <will.deacon@arm.com>,
	Daniel Kurtz <djkurtz@google.com>,
	<linux-mediatek@lists.infradead.org>,
	<srv_heupstream@mediatek.com>, <devicetree@vger.kernel.org>,
	<linux-kernel@vger.kernel.org>,
	<linux-arm-kernel@lists.infradead.org>,
	<iommu@lists.linux-foundation.org>, <arnd@arndb.de>,
	<yingjoe.chen@mediatek.com>, <yong.wu@mediatek.com>,
	<youlin.pei@mediatek.com>
Subject: [PATCH v2 13/14] memory: mtk-smi: Get rid of need_larbid
Date: Mon, 24 Sep 2018 16:58:53 +0800	[thread overview]
Message-ID: <1537779534-23575-14-git-send-email-yong.wu@mediatek.com> (raw)
In-Reply-To: <1537779534-23575-1-git-send-email-yong.wu@mediatek.com>

The "mediatek,larb-id" has already been parsed in MTK IOMMU driver.
It's no need to parse it again in SMI driver. Only clean some codes.
This patch is fit for all the current mt2701, mt2712, mt8173 and
mt8183.

Signed-off-by: Yong Wu <yong.wu@mediatek.com>
---
 drivers/memory/mtk-smi.c | 27 ++-------------------------
 1 file changed, 2 insertions(+), 25 deletions(-)

diff --git a/drivers/memory/mtk-smi.c b/drivers/memory/mtk-smi.c
index e4daabb..e0265fe 100644
--- a/drivers/memory/mtk-smi.c
+++ b/drivers/memory/mtk-smi.c
@@ -67,7 +67,6 @@ struct mtk_smi_common_plat {
 };
 
 struct mtk_smi_larb_gen {
-	bool need_larbid;
 	int port_in_larb[MTK_LARB_NR_MAX + 1];
 	void (*config_port)(struct device *);
 	unsigned int larb_special_mask; /* The special larbs mask. */
@@ -152,18 +151,9 @@ void mtk_smi_larb_put(struct device *larbdev)
 	struct mtk_smi_iommu *smi_iommu = data;
 	unsigned int         i;
 
-	if (larb->larb_gen->need_larbid) {
-		larb->mmu = &smi_iommu->larb_imu[larb->larbid].mmu;
-		return 0;
-	}
-
-	/*
-	 * If there is no larbid property, Loop to find the corresponding
-	 * iommu information.
-	 */
-	for (i = 0; i < smi_iommu->larb_nr; i++) {
+	for (i = 0; i < MTK_LARB_NR_MAX; i++) {
 		if (dev == smi_iommu->larb_imu[i].dev) {
-			/* The 'mmu' may be updated in iommu-attach/detach. */
+			larb->larbid = i;
 			larb->mmu = &smi_iommu->larb_imu[i].mmu;
 			return 0;
 		}
@@ -242,7 +232,6 @@ static void mtk_smi_larb_config_port_gen1(struct device *dev)
 };
 
 static const struct mtk_smi_larb_gen mtk_smi_larb_mt2701 = {
-	.need_larbid = true,
 	.port_in_larb = {
 		LARB0_PORT_OFFSET, LARB1_PORT_OFFSET,
 		LARB2_PORT_OFFSET, LARB3_PORT_OFFSET
@@ -251,13 +240,11 @@ static void mtk_smi_larb_config_port_gen1(struct device *dev)
 };
 
 static const struct mtk_smi_larb_gen mtk_smi_larb_mt2712 = {
-	.need_larbid = true,
 	.config_port = mtk_smi_larb_config_port_gen2_general,
 	.larb_special_mask = BIT(8) | BIT(9), /* bdpsys */
 };
 
 static const struct mtk_smi_larb_gen mtk_smi_larb_mt8183 = {
-	.need_larbid = true,
 	.config_port = mtk_smi_larb_config_port_gen2_general,
 	.larb_special_mask = BIT(2) | BIT(3) | BIT(7), /* IPU0 | IPU1 | CCU */
 };
@@ -289,7 +276,6 @@ static int mtk_smi_larb_probe(struct platform_device *pdev)
 	struct device *dev = &pdev->dev;
 	struct device_node *smi_node;
 	struct platform_device *smi_pdev;
-	int err;
 
 	larb = devm_kzalloc(dev, sizeof(*larb), GFP_KERNEL);
 	if (!larb)
@@ -316,15 +302,6 @@ static int mtk_smi_larb_probe(struct platform_device *pdev)
 		return PTR_ERR(larb->smi.clk_gals0);
 	larb->smi.dev = dev;
 
-	if (larb->larb_gen->need_larbid) {
-		err = of_property_read_u32(dev->of_node, "mediatek,larb-id",
-					   &larb->larbid);
-		if (err) {
-			dev_err(dev, "missing larbid property\n");
-			return err;
-		}
-	}
-
 	smi_node = of_parse_phandle(dev->of_node, "mediatek,smi", 0);
 	if (!smi_node)
 		return -EINVAL;
-- 
1.9.1


  parent reply	other threads:[~2018-09-24  9:02 UTC|newest]

Thread overview: 19+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-09-24  8:58 [PATCH v2 00/14] MT8183 IOMMU SUPPORT Yong Wu
2018-09-24  8:58 ` [PATCH v2 01/14] dt-bindings: mediatek: Add binding for mt8183 IOMMU and SMI Yong Wu
2018-09-24  8:58 ` [PATCH v2 02/14] iommu/mediatek: Use a struct as the platform data Yong Wu
2018-09-24  8:58 ` [PATCH v2 03/14] memory: mtk-smi: Use a general config_port interface Yong Wu
2018-09-24  8:58 ` [PATCH v2 04/14] iommu/io-pgtable-arm-v7s: Add paddr_to_iopte and iopte_to_paddr helpers Yong Wu
2018-11-01 16:34   ` Robin Murphy
2018-11-02  6:23     ` Yong Wu
2018-09-24  8:58 ` [PATCH v2 05/14] iommu/io-pgtable-arm-v7s: Extend MediaTek 4GB Mode Yong Wu
2018-11-01 16:35   ` Robin Murphy
2018-11-02  6:23     ` Yong Wu
2018-09-24  8:58 ` [PATCH v2 06/14] iommu/mediatek: Add mt8183 IOMMU support Yong Wu
2018-09-24  8:58 ` [PATCH v2 07/14] iommu/mediatek: Add mmu1 support Yong Wu
2018-09-24  8:58 ` [PATCH v2 08/14] memory: mtk-smi: Invoke pm runtime_callback to enable clocks Yong Wu
2018-09-24  8:58 ` [PATCH v2 09/14] memory: mtk-smi: Use a struct for the platform data for smi-common Yong Wu
2018-09-24  8:58 ` [PATCH v2 10/14] memory: mtk-smi: Add bus_sel for mt8183 Yong Wu
2018-09-24  8:58 ` [PATCH v2 11/14] iommu/mediatek: Add VLD_PA_RANGE register backup when suspend Yong Wu
2018-09-24  8:58 ` [PATCH v2 12/14] iommu/mediatek: Add shutdown callback Yong Wu
2018-09-24  8:58 ` Yong Wu [this message]
2018-09-24  8:58 ` [PATCH v2 14/14] iommu/mediatek: Switch to SPDX license identifier Yong Wu

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1537779534-23575-14-git-send-email-yong.wu@mediatek.com \
    --to=yong.wu@mediatek.com \
    --cc=arnd@arndb.de \
    --cc=devicetree@vger.kernel.org \
    --cc=djkurtz@google.com \
    --cc=iommu@lists.linux-foundation.org \
    --cc=joro@8bytes.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mediatek@lists.infradead.org \
    --cc=matthias.bgg@gmail.com \
    --cc=robh+dt@kernel.org \
    --cc=robin.murphy@arm.com \
    --cc=srv_heupstream@mediatek.com \
    --cc=tfiga@google.com \
    --cc=will.deacon@arm.com \
    --cc=yingjoe.chen@mediatek.com \
    --cc=youlin.pei@mediatek.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).