From: Nicolin Chen <nicoleotsuka@gmail.com>
To: jdelvare@suse.com, linux@roeck-us.net, corbet@lwn.net
Cc: afd@ti.com, linux-hwmon@vger.kernel.org,
linux-kernel@vger.kernel.org, linux-doc@vger.kernel.org
Subject: [PATCH 2/2] hwmon: ina3221: Add enable sysfs nodes
Date: Tue, 25 Sep 2018 23:42:45 -0700 [thread overview]
Message-ID: <20180926064245.4091-3-nicoleotsuka@gmail.com> (raw)
In-Reply-To: <20180926064245.4091-1-nicoleotsuka@gmail.com>
The inX_enable interface allows user space to enable or disable
the corresponding channel. Meanwhile, according to hwmon ABI, a
disabled channel/sensor should return -ENODATA as a read result.
However, there're configurable nodes sharing the same __show()
functions. So this change also adds to check if the attribute is
read-only to make sure it's not reading a configuration but the
sensor data.
Signed-off-by: Nicolin Chen <nicoleotsuka@gmail.com>
---
Documentation/hwmon/ina3221 | 1 +
drivers/hwmon/ina3221.c | 85 +++++++++++++++++++++++++++++++++++++
2 files changed, 86 insertions(+)
diff --git a/Documentation/hwmon/ina3221 b/Documentation/hwmon/ina3221
index 6be64b553cd0..1aa32366d8aa 100644
--- a/Documentation/hwmon/ina3221
+++ b/Documentation/hwmon/ina3221
@@ -23,6 +23,7 @@ Sysfs entries
in[123]_input Bus voltage(mV) channels
in[123]_label Voltage channel labels
+in[123]_enable Voltage channel enable controls
curr[123]_input Current(mA) measurement channels
shunt[123]_resistor Shunt resistance(uOhm) channels
curr[123]_crit Critical alert current(mA) setting, activates the
diff --git a/drivers/hwmon/ina3221.c b/drivers/hwmon/ina3221.c
index 5890a2da3bfe..1be2d062a19e 100644
--- a/drivers/hwmon/ina3221.c
+++ b/drivers/hwmon/ina3221.c
@@ -78,6 +78,9 @@ enum ina3221_channels {
};
static const unsigned int register_channel[] = {
+ [INA3221_BUS1] = INA3221_CHANNEL1,
+ [INA3221_BUS2] = INA3221_CHANNEL2,
+ [INA3221_BUS3] = INA3221_CHANNEL3,
[INA3221_SHUNT1] = INA3221_CHANNEL1,
[INA3221_SHUNT2] = INA3221_CHANNEL2,
[INA3221_SHUNT3] = INA3221_CHANNEL3,
@@ -113,6 +116,19 @@ struct ina3221_data {
struct ina3221_input inputs[INA3221_NUM_CHANNELS];
};
+static inline bool ina3221_is_enable(struct ina3221_data *ina, int channel)
+{
+ unsigned int config;
+ int ret;
+
+ /* Return false to reject further read */
+ ret = regmap_read(ina->regmap, INA3221_CONFIG, &config);
+ if (ret)
+ return false;
+
+ return (config & INA3221_CONFIG_CHx_EN(channel)) > 0;
+}
+
static ssize_t ina3221_show_label(struct device *dev,
struct device_attribute *attr, char *buf)
{
@@ -124,6 +140,45 @@ static ssize_t ina3221_show_label(struct device *dev,
return snprintf(buf, PAGE_SIZE, "%s\n", input->label);
}
+static ssize_t ina3221_show_enable(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct sensor_device_attribute *sd_attr = to_sensor_dev_attr(attr);
+ struct ina3221_data *ina = dev_get_drvdata(dev);
+ unsigned int channel = sd_attr->index;
+
+ return snprintf(buf, PAGE_SIZE, "%d\n",
+ ina3221_is_enable(ina, channel));
+}
+
+static ssize_t ina3221_set_enable(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct sensor_device_attribute *sd_attr = to_sensor_dev_attr(attr);
+ struct ina3221_data *ina = dev_get_drvdata(dev);
+ unsigned int channel = sd_attr->index;
+ unsigned int mask = INA3221_CONFIG_CHx_EN(channel);
+ unsigned int config;
+ int val, ret;
+
+ ret = kstrtoint(buf, 0, &val);
+ if (ret)
+ return ret;
+
+ /* inX_enable only accepts 1 for enabling or 0 for disabling */
+ if (val != 0 && val != 1)
+ return -EINVAL;
+
+ config = val ? mask : 0;
+
+ ret = regmap_update_bits(ina->regmap, INA3221_CONFIG, mask, config);
+ if (ret)
+ return ret;
+
+ return count;
+}
+
static int ina3221_read_value(struct ina3221_data *ina, unsigned int reg,
int *val)
{
@@ -146,8 +201,13 @@ static ssize_t ina3221_show_bus_voltage(struct device *dev,
struct sensor_device_attribute *sd_attr = to_sensor_dev_attr(attr);
struct ina3221_data *ina = dev_get_drvdata(dev);
unsigned int reg = sd_attr->index;
+ unsigned int channel = register_channel[reg];
int val, voltage_mv, ret;
+ /* No data for read-only attribute if channel is disabled */
+ if (!attr->store && !ina3221_is_enable(ina, channel))
+ return -ENODATA;
+
ret = ina3221_read_value(ina, reg, &val);
if (ret)
return ret;
@@ -164,8 +224,13 @@ static ssize_t ina3221_show_shunt_voltage(struct device *dev,
struct sensor_device_attribute *sd_attr = to_sensor_dev_attr(attr);
struct ina3221_data *ina = dev_get_drvdata(dev);
unsigned int reg = sd_attr->index;
+ unsigned int channel = register_channel[reg];
int val, voltage_uv, ret;
+ /* No data for read-only attribute if channel is disabled */
+ if (!attr->store && !ina3221_is_enable(ina, channel))
+ return -ENODATA;
+
ret = ina3221_read_value(ina, reg, &val);
if (ret)
return ret;
@@ -201,8 +266,13 @@ static ssize_t ina3221_show_current(struct device *dev,
struct sensor_device_attribute *sd_attr = to_sensor_dev_attr(attr);
struct ina3221_data *ina = dev_get_drvdata(dev);
unsigned int reg = sd_attr->index;
+ unsigned int channel = register_channel[reg];
int current_ma, ret;
+ /* No data for read-only attribute if channel is disabled */
+ if (!attr->store && !ina3221_is_enable(ina, channel))
+ return -ENODATA;
+
ret = __ina3221_show_current(ina, reg, ¤t_ma);
if (ret)
return ret;
@@ -318,6 +388,10 @@ static ssize_t ina3221_show_power(struct device *dev,
int val, current_ma, voltage_mv, ret;
s64 power_uw;
+ /* No data for read-only attribute if channel is disabled */
+ if (!attr->store && !ina3221_is_enable(ina, channel))
+ return -ENODATA;
+
/* Read bus voltage */
ret = ina3221_read_value(ina, reg_bus, &val);
if (ret)
@@ -377,6 +451,14 @@ static SENSOR_DEVICE_ATTR(in2_label, 0444,
static SENSOR_DEVICE_ATTR(in3_label, 0444,
ina3221_show_label, NULL, INA3221_CHANNEL3);
+/* voltage channel enable */
+static SENSOR_DEVICE_ATTR(in1_enable, 0644,
+ ina3221_show_enable, ina3221_set_enable, INA3221_CHANNEL1);
+static SENSOR_DEVICE_ATTR(in2_enable, 0644,
+ ina3221_show_enable, ina3221_set_enable, INA3221_CHANNEL2);
+static SENSOR_DEVICE_ATTR(in3_enable, 0644,
+ ina3221_show_enable, ina3221_set_enable, INA3221_CHANNEL3);
+
/* bus voltage */
static SENSOR_DEVICE_ATTR(in1_input, S_IRUGO,
ina3221_show_bus_voltage, NULL, INA3221_BUS1);
@@ -460,6 +542,7 @@ static SENSOR_DEVICE_ATTR(power3_crit, 0644,
static struct attribute *ina3221_attrs[] = {
/* channel 1 -- make sure label at first */
&sensor_dev_attr_in1_label.dev_attr.attr,
+ &sensor_dev_attr_in1_enable.dev_attr.attr,
&sensor_dev_attr_in1_input.dev_attr.attr,
&sensor_dev_attr_curr1_input.dev_attr.attr,
&sensor_dev_attr_shunt1_resistor.dev_attr.attr,
@@ -473,6 +556,7 @@ static struct attribute *ina3221_attrs[] = {
/* channel 2 -- make sure label at first */
&sensor_dev_attr_in2_label.dev_attr.attr,
+ &sensor_dev_attr_in2_enable.dev_attr.attr,
&sensor_dev_attr_in2_input.dev_attr.attr,
&sensor_dev_attr_curr2_input.dev_attr.attr,
&sensor_dev_attr_shunt2_resistor.dev_attr.attr,
@@ -486,6 +570,7 @@ static struct attribute *ina3221_attrs[] = {
/* channel 3 -- make sure label at first */
&sensor_dev_attr_in3_label.dev_attr.attr,
+ &sensor_dev_attr_in3_enable.dev_attr.attr,
&sensor_dev_attr_in3_input.dev_attr.attr,
&sensor_dev_attr_curr3_input.dev_attr.attr,
&sensor_dev_attr_shunt3_resistor.dev_attr.attr,
--
2.17.1
next prev parent reply other threads:[~2018-09-26 6:43 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-09-26 6:42 [PATCH 0/2] hwmon: ina3221: Add power and enable sysfs nodes Nicolin Chen
2018-09-26 6:42 ` [PATCH 1/2] hwmon: ina3221: Add power " Nicolin Chen
2018-09-26 12:34 ` Guenter Roeck
2018-09-26 18:20 ` Nicolin Chen
2018-09-26 19:45 ` Guenter Roeck
2018-09-26 19:49 ` Nicolin Chen
2018-09-26 6:42 ` Nicolin Chen [this message]
2018-09-26 13:06 ` [PATCH 2/2] hwmon: ina3221: Add enable " Guenter Roeck
2018-09-26 18:02 ` Nicolin Chen
2018-09-26 19:58 ` Guenter Roeck
2018-09-26 20:25 ` Nicolin Chen
2018-09-26 20:44 ` Guenter Roeck
2018-09-26 21:55 ` Nicolin Chen
2018-09-27 16:05 ` Guenter Roeck
2018-09-27 18:39 ` Nicolin Chen
2018-09-27 22:26 ` Nicolin Chen
2018-09-27 22:52 ` Guenter Roeck
2018-09-27 23:14 ` Nicolin Chen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180926064245.4091-3-nicoleotsuka@gmail.com \
--to=nicoleotsuka@gmail.com \
--cc=afd@ti.com \
--cc=corbet@lwn.net \
--cc=jdelvare@suse.com \
--cc=linux-doc@vger.kernel.org \
--cc=linux-hwmon@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux@roeck-us.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).