From: Dan Murphy <dmurphy@ti.com>
To: <robh+dt@kernel.org>, <jacek.anaszewski@gmail.com>, <pavel@ucw.cz>
Cc: <devicetree@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
<lee.jones@linaro.org>, <linux-omap@vger.kernel.org>,
<linux-leds@vger.kernel.org>, Dan Murphy <dmurphy@ti.com>
Subject: [RFC PATCH 2/9] dt-bindings: ti-lmu: Remove LM3697
Date: Wed, 26 Sep 2018 08:09:14 -0500 [thread overview]
Message-ID: <20180926130921.12329-3-dmurphy@ti.com> (raw)
In-Reply-To: <20180926130921.12329-1-dmurphy@ti.com>
Remove support for the LM3697 LED device
from the ti-lmu. The LM3697 will be supported
via a stand alone LED driver.
Signed-off-by: Dan Murphy <dmurphy@ti.com>
---
.../devicetree/bindings/mfd/ti-lmu.txt | 26 +------------------
1 file changed, 1 insertion(+), 25 deletions(-)
diff --git a/Documentation/devicetree/bindings/mfd/ti-lmu.txt b/Documentation/devicetree/bindings/mfd/ti-lmu.txt
index c885cf89b8ce..920f910be4e9 100644
--- a/Documentation/devicetree/bindings/mfd/ti-lmu.txt
+++ b/Documentation/devicetree/bindings/mfd/ti-lmu.txt
@@ -9,7 +9,6 @@ TI LMU driver supports lighting devices below.
LM3632 Backlight and regulator
LM3633 Backlight, LED and fault monitor
LM3695 Backlight
- LM3697 Backlight and fault monitor
Required properties:
- compatible: Should be one of:
@@ -18,11 +17,10 @@ Required properties:
"ti,lm3632"
"ti,lm3633"
"ti,lm3695"
- "ti,lm3697"
- reg: I2C slave address.
0x11 for LM3632
0x29 for LM3631
- 0x36 for LM3633, LM3697
+ 0x36 for LM3633
0x38 for LM3532
0x63 for LM3695
@@ -38,7 +36,6 @@ Optional nodes:
Required properties:
- compatible: Should be one of:
"ti,lm3633-fault-monitor"
- "ti,lm3697-fault-monitor"
- leds: LED properties for LM3633. Please refer to [2].
- regulators: Regulator properties for LM3631 and LM3632.
Please refer to [3].
@@ -220,24 +217,3 @@ lm3695@63 {
};
};
};
-
-lm3697@36 {
- compatible = "ti,lm3697";
- reg = <0x36>;
-
- enable-gpios = <&pioC 2 GPIO_ACTIVE_HIGH>;
-
- backlight {
- compatible = "ti,lm3697-backlight";
-
- lcd {
- led-sources = <0 1 2>;
- ramp-up-msec = <200>;
- ramp-down-msec = <200>;
- };
- };
-
- fault-monitor {
- compatible = "ti,lm3697-fault-monitor";
- };
-};
--
2.19.0
next prev parent reply other threads:[~2018-09-26 13:09 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-09-26 13:09 [RFC PATCH 0/9] TI LMU and Dedicated LED drivers Dan Murphy
2018-09-26 13:09 ` [RFC PATCH 1/9] leds: add TI LMU backlight driver Dan Murphy
2018-09-26 15:01 ` Tony Lindgren
2018-09-26 15:30 ` Dan Murphy
2018-09-26 13:09 ` Dan Murphy [this message]
2018-09-26 13:09 ` [RFC PATCH 3/9] mfd: ti-lmu: Remove support for LM3697 Dan Murphy
2018-09-26 13:09 ` [RFC PATCH 4/9] dt-bindings: leds: Add bindings for lm3697 driver Dan Murphy
2018-09-26 13:09 ` [RFC PATCH 5/9] leds: lm3697: Introduce the " Dan Murphy
2018-09-26 13:09 ` [RFC PATCH 6/9] dt-bindings: leds: Add support for the LM3633 Dan Murphy
2018-09-26 13:09 ` [RFC PATCH 7/9] leds: lm3633: Introduce the lm3633 driver Dan Murphy
2018-09-26 22:36 ` Pavel Machek
2018-09-27 12:04 ` Dan Murphy
2018-09-27 21:47 ` Pavel Machek
2018-09-28 16:48 ` Dan Murphy
2018-09-26 13:09 ` [RFC PATCH 8/9] dt-bindings: leds: Add the LM3632 LED dt binding Dan Murphy
2018-09-26 13:09 ` [RFC PATCH 9/9] leds: lm3632: Introduce the TI LM3632 driver Dan Murphy
2018-10-07 13:46 ` Pavel Machek
2018-10-08 12:23 ` Dan Murphy
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180926130921.12329-3-dmurphy@ti.com \
--to=dmurphy@ti.com \
--cc=devicetree@vger.kernel.org \
--cc=jacek.anaszewski@gmail.com \
--cc=lee.jones@linaro.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-leds@vger.kernel.org \
--cc=linux-omap@vger.kernel.org \
--cc=pavel@ucw.cz \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).