From: Dan Murphy <dmurphy@ti.com>
To: <robh+dt@kernel.org>, <jacek.anaszewski@gmail.com>, <pavel@ucw.cz>
Cc: <devicetree@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
<lee.jones@linaro.org>, <linux-omap@vger.kernel.org>,
<linux-leds@vger.kernel.org>, Dan Murphy <dmurphy@ti.com>
Subject: [RFC PATCH 8/9] dt-bindings: leds: Add the LM3632 LED dt binding
Date: Wed, 26 Sep 2018 08:09:20 -0500 [thread overview]
Message-ID: <20180926130921.12329-9-dmurphy@ti.com> (raw)
In-Reply-To: <20180926130921.12329-1-dmurphy@ti.com>
Add the TI LM3632 LED binding.
Signed-off-by: Dan Murphy <dmurphy@ti.com>
---
.../devicetree/bindings/leds/leds-lm3632.txt | 53 +++++++++++++++++++
1 file changed, 53 insertions(+)
create mode 100644 Documentation/devicetree/bindings/leds/leds-lm3632.txt
diff --git a/Documentation/devicetree/bindings/leds/leds-lm3632.txt b/Documentation/devicetree/bindings/leds/leds-lm3632.txt
new file mode 100644
index 000000000000..1befd17174ac
--- /dev/null
+++ b/Documentation/devicetree/bindings/leds/leds-lm3632.txt
@@ -0,0 +1,53 @@
+* Texas Instruments - lm3632 Single-Chip Backlight and 1.5-A Flash LED Driver
+
+The LM3632A integrates LED drivers for both
+the backlight of the LCD panel and the camera flash
+along with the bias power for the LCD panel into one
+device.
+
+Required properties:
+ - compatible : Can be one of the following
+ "ti,lm3632"
+ - reg : I2C slave address
+ - #address-cells : 1
+ - #size-cells : 0
+
+Required child properties:
+ - reg : 0 - Indicates a backlight mode
+ 1 - Indicates a Torch/Strobe (white LED) mode
+
+Required properties for flash LED child nodes:
+ See Documentation/devicetree/bindings/leds/common.txt
+ - flash-max-microamp : Range from 100mA - 1.5A
+ - flash-max-timeout-us : Range from 32ms - 1024ms
+ - led-max-microamp : Range from 25mA - 375mA
+
+Optional child properties:
+ - label : see Documentation/devicetree/bindings/leds/common.txt
+ - linux,default-trigger :
+ see Documentation/devicetree/bindings/leds/common.txt
+
+Example:
+led-controller@11 {
+ compatible = "ti,lm3632";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x11>;
+
+ led@0 {
+ reg = <0>;
+ label = "white:backlight";
+ linux,default-trigger = "backlight";
+ };
+
+ led@1 {
+ reg = <1>;
+ label = "white:torch";
+ led-max-microamp = <375000>;
+ flash-max-microamp = <1500000>;
+ flash-max-timeout-us = <1000000>;
+ };
+}
+
+For more product information please see the links below:
+http://www.ti.com/product/LM3632
--
2.19.0
next prev parent reply other threads:[~2018-09-26 13:10 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-09-26 13:09 [RFC PATCH 0/9] TI LMU and Dedicated LED drivers Dan Murphy
2018-09-26 13:09 ` [RFC PATCH 1/9] leds: add TI LMU backlight driver Dan Murphy
2018-09-26 15:01 ` Tony Lindgren
2018-09-26 15:30 ` Dan Murphy
2018-09-26 13:09 ` [RFC PATCH 2/9] dt-bindings: ti-lmu: Remove LM3697 Dan Murphy
2018-09-26 13:09 ` [RFC PATCH 3/9] mfd: ti-lmu: Remove support for LM3697 Dan Murphy
2018-09-26 13:09 ` [RFC PATCH 4/9] dt-bindings: leds: Add bindings for lm3697 driver Dan Murphy
2018-09-26 13:09 ` [RFC PATCH 5/9] leds: lm3697: Introduce the " Dan Murphy
2018-09-26 13:09 ` [RFC PATCH 6/9] dt-bindings: leds: Add support for the LM3633 Dan Murphy
2018-09-26 13:09 ` [RFC PATCH 7/9] leds: lm3633: Introduce the lm3633 driver Dan Murphy
2018-09-26 22:36 ` Pavel Machek
2018-09-27 12:04 ` Dan Murphy
2018-09-27 21:47 ` Pavel Machek
2018-09-28 16:48 ` Dan Murphy
2018-09-26 13:09 ` Dan Murphy [this message]
2018-09-26 13:09 ` [RFC PATCH 9/9] leds: lm3632: Introduce the TI LM3632 driver Dan Murphy
2018-10-07 13:46 ` Pavel Machek
2018-10-08 12:23 ` Dan Murphy
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180926130921.12329-9-dmurphy@ti.com \
--to=dmurphy@ti.com \
--cc=devicetree@vger.kernel.org \
--cc=jacek.anaszewski@gmail.com \
--cc=lee.jones@linaro.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-leds@vger.kernel.org \
--cc=linux-omap@vger.kernel.org \
--cc=pavel@ucw.cz \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).