[PATCH net-next] phy: mscc: fix printf format

From: Arnd Bergmann <arnd@arndb.de>
To: Andrew Lunn <andrew@lunn.ch>,
	Florian Fainelli <f.fainelli@gmail.com>,
	"David S. Miller" <davem@davemloft.net>
Cc: Arnd Bergmann <arnd@arndb.de>,
	Quentin Schulz <quentin.schulz@bootlin.com>,
	Alexandre Belloni <alexandre.belloni@bootlin.com>,
	netdev@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [PATCH net-next] phy: mscc: fix printf format
Date: Wed, 26 Sep 2018 15:20:11 +0200	[thread overview]
Message-ID: <20180926132021.2933754-1-arnd@arndb.de> (raw)

gcc points out that the length of the temporary buffer may not be sufficient for
large numbers of leds:

drivers/net/phy/mscc.c: In function 'vsc85xx_probe':
drivers/net/phy/mscc.c:460:45: error: '-mode' directive writing 5 bytes into a region of size between 0 and 9 [-Werror=format-overflow=]
   ret = sprintf(led_dt_prop, "vsc8531,led-%d-mode", i);
                                             ^~~~~
drivers/net/phy/mscc.c:460:9: note: 'sprintf' output between 19 and 28 bytes into a destination of size 22
   ret = sprintf(led_dt_prop, "vsc8531,led-%d-mode", i);
         ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

While we can make a reasonable assumption that the number of LEDs is small,
the cost of making the buffer a little bigger is insignificant as well.

Fixes: 11bfdabb7ff5 ("net: phy: mscc: factorize code for LEDs mode")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
---
 drivers/net/phy/mscc.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/phy/mscc.c b/drivers/net/phy/mscc.c
index 2d9676d78d3f..7d0384e26c99 100644
--- a/drivers/net/phy/mscc.c
+++ b/drivers/net/phy/mscc.c
@@ -453,7 +453,7 @@ static int vsc85xx_dt_led_modes_get(struct phy_device *phydev,
 				    u32 *default_mode)
 {
 	struct vsc8531_private *priv = phydev->priv;
-	char led_dt_prop[19];
+	char led_dt_prop[28];
 	int i, ret;
 
 	for (i = 0; i < priv->nleds; i++) {
-- 
2.18.0

