From: Masahiro Yamada <yamada.masahiro@socionext.com>
To: Wolfram Sang <wsa+renesas@sang-engineering.com>,
linux-mmc@vger.kernel.org
Cc: Ulf Hansson <ulf.hansson@linaro.org>,
linux-renesas-soc@vger.kernel.org,
Masahiro Yamada <yamada.masahiro@socionext.com>,
linux-kernel@vger.kernel.org
Subject: [PATCH v2 1/2] mmc: tmio: move MFD variant reset to a platform hook
Date: Wed, 3 Oct 2018 20:36:26 +0900 [thread overview]
Message-ID: <1538566587-29452-2-git-send-email-yamada.masahiro@socionext.com> (raw)
In-Reply-To: <1538566587-29452-1-git-send-email-yamada.masahiro@socionext.com>
CTL_RESET_SDIO register is specific to the TMIO MFD (tmio_mmc.c).
Add a new hook host->reset for performing a platform-specific reset
sequence, and move CTL_RESET_SDIO over there.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
---
Changes in v2:
- Preserve the current sequence for tmio_mmc.c
drivers/mmc/host/tmio_mmc.c | 17 +++++++++++++++++
drivers/mmc/host/tmio_mmc.h | 1 +
drivers/mmc/host/tmio_mmc_core.c | 8 +++-----
3 files changed, 21 insertions(+), 5 deletions(-)
diff --git a/drivers/mmc/host/tmio_mmc.c b/drivers/mmc/host/tmio_mmc.c
index e04c322..00d291c 100644
--- a/drivers/mmc/host/tmio_mmc.c
+++ b/drivers/mmc/host/tmio_mmc.c
@@ -78,6 +78,22 @@ static void tmio_mmc_set_clock(struct tmio_mmc_host *host,
tmio_mmc_clk_start(host);
}
+static void tmio_mmc_reset(struct tmio_mmc_host *host)
+{
+ /* FIXME - should we set stop clock reg here */
+ sd_ctrl_write16(host, CTL_RESET_SD, 0x0000);
+ sd_ctrl_write16(host, CTL_RESET_SDIO, 0x0000);
+ usleep_range(10000, 11000);
+ sd_ctrl_write16(host, CTL_RESET_SD, 0x0001);
+ sd_ctrl_write16(host, CTL_RESET_SDIO, 0x0001);
+ usleep_range(10000, 11000);
+
+ if (host->pdata->flags & TMIO_MMC_SDIO_IRQ) {
+ sd_ctrl_write16(host, CTL_SDIO_IRQ_MASK, host->sdio_irq_mask);
+ sd_ctrl_write16(host, CTL_TRANSACTION_CTL, 0x0001);
+ }
+}
+
#ifdef CONFIG_PM_SLEEP
static int tmio_mmc_suspend(struct device *dev)
{
@@ -156,6 +172,7 @@ static int tmio_mmc_probe(struct platform_device *pdev)
/* SD control register space size is 0x200, 0x400 for bus_shift=1 */
host->bus_shift = resource_size(res) >> 10;
host->set_clock = tmio_mmc_set_clock;
+ host->reset = tmio_mmc_reset;
host->mmc->f_max = pdata->hclk;
host->mmc->f_min = pdata->hclk / 512;
diff --git a/drivers/mmc/host/tmio_mmc.h b/drivers/mmc/host/tmio_mmc.h
index e6aa13a..a1a661b 100644
--- a/drivers/mmc/host/tmio_mmc.h
+++ b/drivers/mmc/host/tmio_mmc.h
@@ -176,6 +176,7 @@ struct tmio_mmc_host {
int (*multi_io_quirk)(struct mmc_card *card,
unsigned int direction, int blk_size);
int (*write16_hook)(struct tmio_mmc_host *host, int addr);
+ void (*reset)(struct tmio_mmc_host *host);
void (*hw_reset)(struct tmio_mmc_host *host);
void (*prepare_tuning)(struct tmio_mmc_host *host, unsigned long tap);
bool (*check_scc_error)(struct tmio_mmc_host *host);
diff --git a/drivers/mmc/host/tmio_mmc_core.c b/drivers/mmc/host/tmio_mmc_core.c
index 0611824..9bcc760 100644
--- a/drivers/mmc/host/tmio_mmc_core.c
+++ b/drivers/mmc/host/tmio_mmc_core.c
@@ -164,19 +164,14 @@ static void tmio_mmc_reset(struct tmio_mmc_host *host)
{
/* FIXME - should we set stop clock reg here */
sd_ctrl_write16(host, CTL_RESET_SD, 0x0000);
- if (host->pdata->flags & TMIO_MMC_HAVE_HIGH_REG)
- sd_ctrl_write16(host, CTL_RESET_SDIO, 0x0000);
usleep_range(10000, 11000);
sd_ctrl_write16(host, CTL_RESET_SD, 0x0001);
- if (host->pdata->flags & TMIO_MMC_HAVE_HIGH_REG)
- sd_ctrl_write16(host, CTL_RESET_SDIO, 0x0001);
usleep_range(10000, 11000);
if (host->pdata->flags & TMIO_MMC_SDIO_IRQ) {
sd_ctrl_write16(host, CTL_SDIO_IRQ_MASK, host->sdio_irq_mask);
sd_ctrl_write16(host, CTL_TRANSACTION_CTL, 0x0001);
}
-
}
static void tmio_mmc_reset_work(struct work_struct *work)
@@ -1212,6 +1207,9 @@ int tmio_mmc_host_probe(struct tmio_mmc_host *_host)
mmc->caps & MMC_CAP_NEEDS_POLL ||
!mmc_card_is_removable(mmc));
+ if (!_host->reset)
+ _host->reset = tmio_mmc_reset;
+
/*
* On Gen2+, eMMC with NONREMOVABLE currently fails because native
* hotplug gets disabled. It seems RuntimePM related yet we need further
--
2.7.4
next prev parent reply other threads:[~2018-10-03 11:37 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-10-03 11:36 [PATCH v2 0/2] mmc: tmio: remove confusing TMIO_MMC_HAVE_HIGH_REG flag Masahiro Yamada
2018-10-03 11:36 ` Masahiro Yamada [this message]
2018-10-09 23:48 ` [PATCH v2 1/2] mmc: tmio: move MFD variant reset to a platform hook Wolfram Sang
2018-10-10 3:47 ` Masahiro Yamada
2018-10-03 11:36 ` [PATCH v2 2/2] mmc: tmio: remove TMIO_MMC_HAVE_HIGH_REG flag Masahiro Yamada
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1538566587-29452-2-git-send-email-yamada.masahiro@socionext.com \
--to=yamada.masahiro@socionext.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mmc@vger.kernel.org \
--cc=linux-renesas-soc@vger.kernel.org \
--cc=ulf.hansson@linaro.org \
--cc=wsa+renesas@sang-engineering.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).