From: Maxime Chevallier <maxime.chevallier@bootlin.com>
To: davem@davemloft.net
Cc: Maxime Chevallier <maxime.chevallier@bootlin.com>,
netdev@vger.kernel.org, linux-kernel@vger.kernel.org,
Antoine Tenart <antoine.tenart@bootlin.com>,
thomas.petazzoni@bootlin.com, gregory.clement@bootlin.com,
miquel.raynal@bootlin.com, nadavh@marvell.com,
stefanc@marvell.com, ymarkman@marvell.com, mw@semihalf.com
Subject: [PATCH net] net: mvpp2: Extract the correct ethtype from the skb for tx csum offload
Date: Thu, 4 Oct 2018 10:03:08 +0200 [thread overview]
Message-ID: <20181004080308.7687-1-maxime.chevallier@bootlin.com> (raw)
When offloading the L3 and L4 csum computation on TX, we need to extract
the l3_proto from the ethtype, independently of the presence of a vlan
tag.
The actual driver uses skb->protocol as-is, resulting in packets with
the wrong L4 checksum being sent when there's a vlan tag in the packet
header and checksum offloading is enabled.
This commit makes use of vlan_protocol_get() to get the correct ethtype
regardless the presence of a vlan tag.
Fixes: 3f51850 ("ethernet: Add new driver for Marvell Armada 375 network unit")
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
---
drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c | 9 +++++----
1 file changed, 5 insertions(+), 4 deletions(-)
diff --git a/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c b/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c
index 38cc01beea79..4bd5b251e3c7 100644
--- a/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c
+++ b/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c
@@ -1737,7 +1737,7 @@ static u32 mvpp2_txq_desc_csum(int l3_offs, int l3_proto,
command |= (ip_hdr_len << MVPP2_TXD_IP_HLEN_SHIFT);
command |= MVPP2_TXD_IP_CSUM_DISABLE;
- if (l3_proto == htons(ETH_P_IP)) {
+ if (l3_proto == ETH_P_IP) {
command &= ~MVPP2_TXD_IP_CSUM_DISABLE; /* enable IPv4 csum */
command &= ~MVPP2_TXD_L3_IP6; /* enable IPv4 */
} else {
@@ -2600,14 +2600,15 @@ static u32 mvpp2_skb_tx_csum(struct mvpp2_port *port, struct sk_buff *skb)
if (skb->ip_summed == CHECKSUM_PARTIAL) {
int ip_hdr_len = 0;
u8 l4_proto;
+ int l3_proto = ntohs(vlan_get_protocol(skb));
- if (skb->protocol == htons(ETH_P_IP)) {
+ if (l3_proto == ETH_P_IP) {
struct iphdr *ip4h = ip_hdr(skb);
/* Calculate IPv4 checksum and L4 checksum */
ip_hdr_len = ip4h->ihl;
l4_proto = ip4h->protocol;
- } else if (skb->protocol == htons(ETH_P_IPV6)) {
+ } else if (l3_proto == ETH_P_IPV6) {
struct ipv6hdr *ip6h = ipv6_hdr(skb);
/* Read l4_protocol from one of IPv6 extra headers */
@@ -2619,7 +2620,7 @@ static u32 mvpp2_skb_tx_csum(struct mvpp2_port *port, struct sk_buff *skb)
}
return mvpp2_txq_desc_csum(skb_network_offset(skb),
- skb->protocol, ip_hdr_len, l4_proto);
+ l3_proto, ip_hdr_len, l4_proto);
}
return MVPP2_TXD_L4_CSUM_NOT | MVPP2_TXD_IP_CSUM_DISABLE;
--
2.11.0
next reply other threads:[~2018-10-04 8:03 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-10-04 8:03 Maxime Chevallier [this message]
2018-10-04 8:08 ` [EXT] [PATCH net] net: mvpp2: Extract the correct ethtype from the skb for tx csum offload Yan Markman
2018-10-04 9:50 ` Sergei Shtylyov
2018-10-04 13:13 ` Maxime Chevallier
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20181004080308.7687-1-maxime.chevallier@bootlin.com \
--to=maxime.chevallier@bootlin.com \
--cc=antoine.tenart@bootlin.com \
--cc=davem@davemloft.net \
--cc=gregory.clement@bootlin.com \
--cc=linux-kernel@vger.kernel.org \
--cc=miquel.raynal@bootlin.com \
--cc=mw@semihalf.com \
--cc=nadavh@marvell.com \
--cc=netdev@vger.kernel.org \
--cc=stefanc@marvell.com \
--cc=thomas.petazzoni@bootlin.com \
--cc=ymarkman@marvell.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).