From: "H. Peter Anvin (Intel)" <hpa@zytor.com>
To: linux-kernel@vger.kernel.org, linux-arch@vger.kernel.org,
linux-serial@vger.kernel.org
Cc: "H. Peter Anvin (Intel)" <hpa@zytor.com>,
Ralf Baechle <ralf@linux-mips.org>,
Paul Burton <paul.burton@mips.com>,
James Hogan <jhogan@kernel.org>,
Philippe Ombredanne <pombredanne@nexb.com>,
Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
Kate Stewart <kstewart@linuxfoundation.org>,
Thomas Gleixner <tglx@linutronix.de>,
linux-mips@linux-mips.org, Jiri Slaby <jslaby@suse.com>
Subject: [PATCH 3/5] arch/mips, termios: use <asm-generic/termbits.h>
Date: Thu, 4 Oct 2018 15:29:51 -0700 [thread overview]
Message-ID: <20181004222953.2229-4-hpa@zytor.com> (raw)
In-Reply-To: <20181004222953.2229-1-hpa@zytor.com>
The MIPS definition of termbits.h is almost identical to the generic
one, so use the generic one and only redefine a handful of constants.
Move TIOCSER_TEMT to ioctls.h where it lives for all other
architectures.
Signed-off-by: H. Peter Anvin (Intel) <hpa@zytor.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Paul Burton <paul.burton@mips.com>
Cc: James Hogan <jhogan@kernel.org>
Cc: Philippe Ombredanne <pombredanne@nexb.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Kate Stewart <kstewart@linuxfoundation.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: <linux-mips@linux-mips.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Jiri Slaby <jslaby@suse.com>
---
arch/mips/include/uapi/asm/ioctls.h | 2 +
arch/mips/include/uapi/asm/termbits.h | 213 +++-------------------------------
2 files changed, 15 insertions(+), 200 deletions(-)
diff --git a/arch/mips/include/uapi/asm/ioctls.h b/arch/mips/include/uapi/asm/ioctls.h
index 890245a9f0c4..a4e11e1438b5 100644
--- a/arch/mips/include/uapi/asm/ioctls.h
+++ b/arch/mips/include/uapi/asm/ioctls.h
@@ -114,4 +114,6 @@
#define TIOCMIWAIT 0x5491 /* wait for a change on serial input line(s) */
#define TIOCGICOUNT 0x5492 /* read serial port inline interrupt counts */
+#define TIOCSER_TEMT 0x01 /* Transmitter physically empty */
+
#endif /* __ASM_IOCTLS_H */
diff --git a/arch/mips/include/uapi/asm/termbits.h b/arch/mips/include/uapi/asm/termbits.h
index dfeffba729b7..a08fa0a697f5 100644
--- a/arch/mips/include/uapi/asm/termbits.h
+++ b/arch/mips/include/uapi/asm/termbits.h
@@ -11,218 +11,31 @@
#ifndef _ASM_TERMBITS_H
#define _ASM_TERMBITS_H
-#include <linux/posix_types.h>
+#define NCCS 23
+#include <asm-generic/termbits.h>
-typedef unsigned char cc_t;
-typedef unsigned int speed_t;
-typedef unsigned int tcflag_t;
-
-/*
- * The ABI says nothing about NCC but seems to use NCCS as
- * replacement for it in struct termio
- */
-#define NCCS 23
-struct termios {
- tcflag_t c_iflag; /* input mode flags */
- tcflag_t c_oflag; /* output mode flags */
- tcflag_t c_cflag; /* control mode flags */
- tcflag_t c_lflag; /* local mode flags */
- cc_t c_line; /* line discipline */
- cc_t c_cc[NCCS]; /* control characters */
-};
-
-struct termios2 {
- tcflag_t c_iflag; /* input mode flags */
- tcflag_t c_oflag; /* output mode flags */
- tcflag_t c_cflag; /* control mode flags */
- tcflag_t c_lflag; /* local mode flags */
- cc_t c_line; /* line discipline */
- cc_t c_cc[NCCS]; /* control characters */
- speed_t c_ispeed; /* input speed */
- speed_t c_ospeed; /* output speed */
-};
-
-struct ktermios {
- tcflag_t c_iflag; /* input mode flags */
- tcflag_t c_oflag; /* output mode flags */
- tcflag_t c_cflag; /* control mode flags */
- tcflag_t c_lflag; /* local mode flags */
- cc_t c_line; /* line discipline */
- cc_t c_cc[NCCS]; /* control characters */
- speed_t c_ispeed; /* input speed */
- speed_t c_ospeed; /* output speed */
-};
-
-/* c_cc characters */
-#define VINTR 0 /* Interrupt character [ISIG]. */
-#define VQUIT 1 /* Quit character [ISIG]. */
-#define VERASE 2 /* Erase character [ICANON]. */
-#define VKILL 3 /* Kill-line character [ICANON]. */
+/* c_cc characters that differ from the generic ABI */
+#undef VMIN
#define VMIN 4 /* Minimum number of bytes read at once [!ICANON]. */
-#define VTIME 5 /* Time-out value (tenths of a second) [!ICANON]. */
+#undef VEOL2
#define VEOL2 6 /* Second EOL character [ICANON]. */
-#define VSWTC 7 /* ??? */
-#define VSWTCH VSWTC
-#define VSTART 8 /* Start (X-ON) character [IXON, IXOFF]. */
-#define VSTOP 9 /* Stop (X-OFF) character [IXON, IXOFF]. */
-#define VSUSP 10 /* Suspend character [ISIG]. */
-#if 0
-/*
- * VDSUSP is not supported
- */
-#define VDSUSP 11 /* Delayed suspend character [ISIG]. */
-#endif
-#define VREPRINT 12 /* Reprint-line character [ICANON]. */
-#define VDISCARD 13 /* Discard character [IEXTEN]. */
-#define VWERASE 14 /* Word-erase character [ICANON]. */
-#define VLNEXT 15 /* Literal-next character [IEXTEN]. */
+#undef VEOF
#define VEOF 16 /* End-of-file character [ICANON]. */
+#undef VEOL
#define VEOL 17 /* End-of-line character [ICANON]. */
-/* c_iflag bits */
-#define IGNBRK 0000001 /* Ignore break condition. */
-#define BRKINT 0000002 /* Signal interrupt on break. */
-#define IGNPAR 0000004 /* Ignore characters with parity errors. */
-#define PARMRK 0000010 /* Mark parity and framing errors. */
-#define INPCK 0000020 /* Enable input parity check. */
-#define ISTRIP 0000040 /* Strip 8th bit off characters. */
-#define INLCR 0000100 /* Map NL to CR on input. */
-#define IGNCR 0000200 /* Ignore CR. */
-#define ICRNL 0000400 /* Map CR to NL on input. */
-#define IUCLC 0001000 /* Map upper case to lower case on input. */
-#define IXON 0002000 /* Enable start/stop output control. */
-#define IXANY 0004000 /* Any character will restart after stop. */
-#define IXOFF 0010000 /* Enable start/stop input control. */
-#define IMAXBEL 0020000 /* Ring bell when input queue is full. */
-#define IUTF8 0040000 /* Input is UTF-8 */
-
-/* c_oflag bits */
-#define OPOST 0000001 /* Perform output processing. */
-#define OLCUC 0000002 /* Map lower case to upper case on output. */
-#define ONLCR 0000004 /* Map NL to CR-NL on output. */
-#define OCRNL 0000010
-#define ONOCR 0000020
-#define ONLRET 0000040
-#define OFILL 0000100
-#define OFDEL 0000200
-#define NLDLY 0000400
-#define NL0 0000000
-#define NL1 0000400
-#define CRDLY 0003000
-#define CR0 0000000
-#define CR1 0001000
-#define CR2 0002000
-#define CR3 0003000
-#define TABDLY 0014000
-#define TAB0 0000000
-#define TAB1 0004000
-#define TAB2 0010000
-#define TAB3 0014000
-#define XTABS 0014000
-#define BSDLY 0020000
-#define BS0 0000000
-#define BS1 0020000
-#define VTDLY 0040000
-#define VT0 0000000
-#define VT1 0040000
-#define FFDLY 0100000
-#define FF0 0000000
-#define FF1 0100000
-/*
-#define PAGEOUT ???
-#define WRAP ???
- */
-
-/* c_cflag bit meaning */
-#define CBAUD 0010017
-#define B0 0000000 /* hang up */
-#define B50 0000001
-#define B75 0000002
-#define B110 0000003
-#define B134 0000004
-#define B150 0000005
-#define B200 0000006
-#define B300 0000007
-#define B600 0000010
-#define B1200 0000011
-#define B1800 0000012
-#define B2400 0000013
-#define B4800 0000014
-#define B9600 0000015
-#define B19200 0000016
-#define B38400 0000017
-#define EXTA B19200
-#define EXTB B38400
-#define CSIZE 0000060 /* Number of bits per byte (mask). */
-#define CS5 0000000 /* 5 bits per byte. */
-#define CS6 0000020 /* 6 bits per byte. */
-#define CS7 0000040 /* 7 bits per byte. */
-#define CS8 0000060 /* 8 bits per byte. */
-#define CSTOPB 0000100 /* Two stop bits instead of one. */
-#define CREAD 0000200 /* Enable receiver. */
-#define PARENB 0000400 /* Parity enable. */
-#define PARODD 0001000 /* Odd parity instead of even. */
-#define HUPCL 0002000 /* Hang up on last close. */
-#define CLOCAL 0004000 /* Ignore modem status lines. */
-#define CBAUDEX 0010000
-#define BOTHER 0010000
-#define B57600 0010001
-#define B115200 0010002
-#define B230400 0010003
-#define B460800 0010004
-#define B500000 0010005
-#define B576000 0010006
-#define B921600 0010007
-#define B1000000 0010010
-#define B1152000 0010011
-#define B1500000 0010012
-#define B2000000 0010013
-#define B2500000 0010014
-#define B3000000 0010015
-#define B3500000 0010016
-#define B4000000 0010017
-#define CIBAUD 002003600000 /* input baud rate */
-#define CMSPAR 010000000000 /* mark or space (stick) parity */
-#define CRTSCTS 020000000000 /* flow control */
-
-#define IBSHIFT 16 /* Shift from CBAUD to CIBAUD */
-
-/* c_lflag bits */
-#define ISIG 0000001 /* Enable signals. */
-#define ICANON 0000002 /* Do erase and kill processing. */
-#define XCASE 0000004
-#define ECHO 0000010 /* Enable echo. */
-#define ECHOE 0000020 /* Visual erase for ERASE. */
-#define ECHOK 0000040 /* Echo NL after KILL. */
-#define ECHONL 0000100 /* Echo NL even if ECHO is off. */
-#define NOFLSH 0000200 /* Disable flush after interrupt. */
+/* c_lflag bits that differ from the generic ABI */
+#undef IEXTEN
#define IEXTEN 0000400 /* Enable DISCARD and LNEXT. */
-#define ECHOCTL 0001000 /* Echo control characters as ^X. */
-#define ECHOPRT 0002000 /* Hardcopy visual erase. */
-#define ECHOKE 0004000 /* Visual erase for KILL. */
-#define FLUSHO 0020000
-#define PENDIN 0040000 /* Retype pending input (state). */
+#undef TOSTOP
#define TOSTOP 0100000 /* Send SIGTTOU for background output. */
-#define ITOSTOP TOSTOP
-#define EXTPROC 0200000 /* External processing on pty */
-
-/* ioctl (fd, TIOCSERGETLSR, &result) where result may be as below */
-#define TIOCSER_TEMT 0x01 /* Transmitter physically empty */
-
-/* tcflow() and TCXONC use these */
-#define TCOOFF 0 /* Suspend output. */
-#define TCOON 1 /* Restart suspended output. */
-#define TCIOFF 2 /* Send a STOP character. */
-#define TCION 3 /* Send a START character. */
-
-/* tcflush() and TCFLSH use these */
-#define TCIFLUSH 0 /* Discard data received but not yet read. */
-#define TCOFLUSH 1 /* Discard data written but not yet sent. */
-#define TCIOFLUSH 2 /* Discard all pending data. */
/* tcsetattr uses these */
+#undef TCSANOW
#define TCSANOW TCSETS /* Change immediately. */
+#undef TCSADRAIN
#define TCSADRAIN TCSETSW /* Change when pending output is written. */
+#undef TCSAFLUSH
#define TCSAFLUSH TCSETSF /* Flush pending input before changing. */
#endif /* _ASM_TERMBITS_H */
--
2.14.4
next prev parent reply other threads:[~2018-10-04 22:30 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-10-04 22:29 [PATCH 0/5] termios: remove arch redundancy in <asm/termbits.h> H. Peter Anvin (Intel)
2018-10-04 22:29 ` [PATCH 1/5] asm-generic, termios: add alias constants from MIPS H. Peter Anvin (Intel)
2018-10-05 7:30 ` Geert Uytterhoeven
2018-10-04 22:29 ` [PATCH 2/5] arch/ia64, termios: use <asm-generic/termbits.h> H. Peter Anvin (Intel)
2018-10-04 22:29 ` H. Peter Anvin (Intel) [this message]
2018-10-04 22:29 ` [PATCH 4/5] arch/parisc, termios: use <asm-generic/termios.h> H. Peter Anvin (Intel)
2018-10-04 22:29 ` [PATCH 5/5] arch/xtensa, termios: use <asm-generic/termbits.h> H. Peter Anvin (Intel)
2018-10-04 22:35 ` Max Filippov
2018-10-04 23:08 ` H. Peter Anvin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20181004222953.2229-4-hpa@zytor.com \
--to=hpa@zytor.com \
--cc=gregkh@linuxfoundation.org \
--cc=jhogan@kernel.org \
--cc=jslaby@suse.com \
--cc=kstewart@linuxfoundation.org \
--cc=linux-arch@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mips@linux-mips.org \
--cc=linux-serial@vger.kernel.org \
--cc=paul.burton@mips.com \
--cc=pombredanne@nexb.com \
--cc=ralf@linux-mips.org \
--cc=tglx@linutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).