From: Lubomir Rintel <lkundrak@v3.sk>
To: Rob Herring <robh+dt@kernel.org>,
Mark Rutland <mark.rutland@arm.com>,
Arnd Bergmann <arnd@arndb.de>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
Lubomir Rintel <lkundrak@v3.sk>
Subject: [PATCH 1/2] dt-bindings: himax,hx8837: add HiMax HX8837 bindings
Date: Mon, 8 Oct 2018 22:23:20 +0200 [thread overview]
Message-ID: <20181008202321.128937-1-lkundrak@v3.sk> (raw)
HiMax HX8837 is a display controller used on OLPC platforms.
It controlls backlight and is able to capture and freeze a frame when
the LCD controller (and the rest of the plaform) is powered off.
What is missing here is the description of connections to the LCD
controller and the panel. Maybe it would be a good idea to plug in it
betweend the two in a manner described in
<Documentation/devicetree/bindings/graph.txt>.
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
---
Changes since v1:
- s/load-gpio/load-gpios/
- Use interrupt bindings instead of gpio for the IRQ
.../devicetree/bindings/misc/himax,hx8837.txt | 18 ++++++++++++++++++
1 file changed, 18 insertions(+)
create mode 100644 Documentation/devicetree/bindings/misc/himax,hx8837.txt
diff --git a/Documentation/devicetree/bindings/misc/himax,hx8837.txt b/Documentation/devicetree/bindings/misc/himax,hx8837.txt
new file mode 100644
index 000000000000..d0822c679ae8
--- /dev/null
+++ b/Documentation/devicetree/bindings/misc/himax,hx8837.txt
@@ -0,0 +1,18 @@
+HX8837 Display Controller
+
+Required properties:
+- compatible: Should be "himax,hx8837".
+- reg: I2C address, must be 0x0d
+- stat-gpios: gpio specifier of DCON_STAT0 and DCON_STAT1 pins (active high)
+- load-gpios: gpio specifier of DCON_LOAD pin (active high)
+- interrupt: interrupt specifier of DCON_IRQ pin (edge falling)
+
+Example:
+ dcon@d {
+ compatible = "himax,hx8837";
+ reg = <0x0d>;
+ stat-gpios = <&gpio 100 GPIO_ACTIVE_HIGH
+ &gpio 101 GPIO_ACTIVE_HIGH>;
+ load-gpios = <&gpio 142 GPIO_ACTIVE_HIGH>;
+ interrupts = <&gpio 124 IRQ_TYPE_EDGE_FALLING>;
+ };
--
2.19.0
next reply other threads:[~2018-10-08 20:23 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-10-08 20:23 Lubomir Rintel [this message]
2018-10-08 20:23 ` [PATCH 2/2] misc: hx8837: add a HiMax HX8837 display controller driver Lubomir Rintel
2018-10-17 14:07 ` Rob Herring
2018-11-05 9:19 ` [PATCH 1/2] dt-bindings: himax,hx8837: add HiMax HX8837 bindings Pavel Machek
-- strict thread matches above, loose matches on Subject: below --
2018-09-18 20:43 Lubomir Rintel
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20181008202321.128937-1-lkundrak@v3.sk \
--to=lkundrak@v3.sk \
--cc=arnd@arndb.de \
--cc=devicetree@vger.kernel.org \
--cc=gregkh@linuxfoundation.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).