smartpqi: Fix timeout of smartpqi probe stage
diff mbox series

Message ID CAEK8JBAgRwHZDBrNDNmmRXC3WgX9tVqeoFk5edLHfJL9OWQ-zg@mail.gmail.com
State New
Headers show
Series
  • smartpqi: Fix timeout of smartpqi probe stage
Related show

Commit Message

Feng Li Oct. 12, 2018, 3:13 a.m. UTC
I use 'HPE Smart Array E208i-a SR Gen10 Controller', and pass through
the SAS controller from ESXi 6.0U1 to VM, which is installed CentOS 7.4/7.5.
The disk is not found.

The error log is "controller not ready after 30 seconds."

Add some logs, and could check the probe stage needs nearly 36s to match the
status.

Signed-off-by: Li Feng <fengli@smartx.com>
---
 drivers/scsi/smartpqi/smartpqi_sis.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--
2.11.0

Comments

Feng Li Oct. 19, 2018, 8:02 a.m. UTC | #1
Just Ping.
This is a very serious issue. The OS boot from this raid controller
couldn't find bock devices after installing OS.

I think this patch should be merged asap.

Feng Li <lifeng1519@gmail.com> 于2018年10月12日周五 上午11:13写道:
>
> I use 'HPE Smart Array E208i-a SR Gen10 Controller', and pass through
> the SAS controller from ESXi 6.0U1 to VM, which is installed CentOS 7.4/7.5.
> The disk is not found.
>
> The error log is "controller not ready after 30 seconds."
>
> Add some logs, and could check the probe stage needs nearly 36s to match the
> status.
>
> Signed-off-by: Li Feng <fengli@smartx.com>
> ---
>  drivers/scsi/smartpqi/smartpqi_sis.c | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/drivers/scsi/smartpqi/smartpqi_sis.c
> b/drivers/scsi/smartpqi/smartpqi_sis.c
> index 5141bd4c9..bc7efdacb 100644
> --- a/drivers/scsi/smartpqi/smartpqi_sis.c
> +++ b/drivers/scsi/smartpqi/smartpqi_sis.c
> @@ -59,7 +59,7 @@
>
>  #define SIS_CTRL_KERNEL_UP 0x80
>  #define SIS_CTRL_KERNEL_PANIC 0x100
> -#define SIS_CTRL_READY_TIMEOUT_SECS 30
> +#define SIS_CTRL_READY_TIMEOUT_SECS 90
>  #define SIS_CTRL_READY_RESUME_TIMEOUT_SECS 90
>  #define SIS_CTRL_READY_POLL_INTERVAL_MSECS 10
>
> --
> 2.11.0

Patch
diff mbox series

diff --git a/drivers/scsi/smartpqi/smartpqi_sis.c
b/drivers/scsi/smartpqi/smartpqi_sis.c
index 5141bd4c9..bc7efdacb 100644
--- a/drivers/scsi/smartpqi/smartpqi_sis.c
+++ b/drivers/scsi/smartpqi/smartpqi_sis.c
@@ -59,7 +59,7 @@ 

 #define SIS_CTRL_KERNEL_UP 0x80
 #define SIS_CTRL_KERNEL_PANIC 0x100
-#define SIS_CTRL_READY_TIMEOUT_SECS 30
+#define SIS_CTRL_READY_TIMEOUT_SECS 90
 #define SIS_CTRL_READY_RESUME_TIMEOUT_SECS 90
 #define SIS_CTRL_READY_POLL_INTERVAL_MSECS 10