can: ucan: fix some typos in comments
diff mbox series

Message ID 20181012110024.17067-1-martink@posteo.de
State New
Headers show
Series
  • can: ucan: fix some typos in comments
Related show

Commit Message

Martin Kepplinger Oct. 12, 2018, 11 a.m. UTC
This fixes some double-word and trivial typos in the ucan driver comments.

Signed-off-by: Martin Kepplinger <martink@posteo.de>
---
hi guys,

The Seal looks very nice. Since I'm doing CAN work right now, I could totally
use one of these instead of old gear from PEAK.

I hope you're doing fine. Best regards,

                                martin


 drivers/net/can/usb/ucan.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

Patch
diff mbox series

diff --git a/drivers/net/can/usb/ucan.c b/drivers/net/can/usb/ucan.c
index 0678a38b1af4..8c680fb9fdc8 100644
--- a/drivers/net/can/usb/ucan.c
+++ b/drivers/net/can/usb/ucan.c
@@ -64,7 +64,7 @@ 
  *    the following way:
  *
  *	m[n].len <=> the length if message n(including the header in bytes)
- *	m[n] is is aligned to a 4 byte boundary, hence
+ *	m[n] is aligned to a 4 byte boundary, hence
  *	  offset(m[0])	 := 0;
  *	  offset(m[n+1]) := offset(m[n]) + (m[n].len + 3) & 3
  *
@@ -288,7 +288,7 @@  struct ucan_priv {
 	 */
 	spinlock_t echo_skb_lock;
 
-	/* usb device information information */
+	/* usb device information */
 	u8 intf_index;
 	u8 in_ep_addr;
 	u8 out_ep_addr;
@@ -1449,7 +1449,7 @@  static int ucan_probe(struct usb_interface *intf,
 
 	/* request the device information and store it in ctl_msg_buffer
 	 *
-	 * note: ucan_ctrl_command_* wrappers connot be used yet
+	 * note: ucan_ctrl_command_* wrappers cannot be used yet
 	 * because `up` is initialised in Stage 3
 	 */
 	ret = usb_control_msg(udev,
@@ -1498,7 +1498,7 @@  static int ucan_probe(struct usb_interface *intf,
 
 	up = netdev_priv(netdev);
 
-	/* initialze data */
+	/* initialize data */
 	up->udev = udev;
 	up->intf = intf;
 	up->netdev = netdev;