linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Masahiro Yamada <yamada.masahiro@socionext.com>
To: linux-mmc@vger.kernel.org,
	Wolfram Sang <wsa+renesas@sang-engineering.com>
Cc: Ulf Hansson <ulf.hansson@linaro.org>,
	linux-renesas-soc@vger.kernel.org,
	Masahiro Yamada <yamada.masahiro@socionext.com>,
	linux-kernel@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org
Subject: [PATCH] mmc: tmio: simplify the DMA mode test
Date: Sat, 13 Oct 2018 00:03:08 +0900	[thread overview]
Message-ID: <1539356588-18191-1-git-send-email-yamada.masahiro@socionext.com> (raw)

host->chan_{rx,tx} represents the DMA capability of the platform.
Even if DMA is supported, there are cases where we want to use PIO,
for example, data length is short enough as commit 5f52c3552946
("mmc: tmio: use PIO for short transfers") mentioned.

Regarding the hardware control flow, we are interested in whether DMA
is currently enabled or not, instead of whether the platform has the
DMA capability.

Hence, the several conditionals in tmio_mmc_core.c end up with
checking host->chan_{rx,tx} and !host->force_pio. This is not nice.

Let's flip the flag host->force_pio into host->dma_on.

host->dma_on represents whether the DMA is currently enabled or not.
This flag is set false in the beginning of each command, then should
be set true by tmio_mmc_start_dma() when the DMA is turned on.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
---

 drivers/mmc/host/renesas_sdhi_internal_dmac.c |  3 ++-
 drivers/mmc/host/renesas_sdhi_sys_dmac.c      | 10 ++++------
 drivers/mmc/host/tmio_mmc.h                   |  2 +-
 drivers/mmc/host/tmio_mmc_core.c              | 14 +++++++-------
 drivers/mmc/host/uniphier-sd.c                |  6 ++++--
 5 files changed, 18 insertions(+), 17 deletions(-)

diff --git a/drivers/mmc/host/renesas_sdhi_internal_dmac.c b/drivers/mmc/host/renesas_sdhi_internal_dmac.c
index ca0b439..885676b 100644
--- a/drivers/mmc/host/renesas_sdhi_internal_dmac.c
+++ b/drivers/mmc/host/renesas_sdhi_internal_dmac.c
@@ -201,13 +201,14 @@ renesas_sdhi_internal_dmac_start_dma(struct tmio_mmc_host *host,
 	renesas_sdhi_internal_dmac_dm_write(host, DM_DTRAN_ADDR,
 					    sg_dma_address(sg));
 
+	host->dma_on = true;
+
 	return;
 
 force_pio_with_unmap:
 	dma_unmap_sg(&host->pdev->dev, sg, host->sg_len, mmc_get_dma_dir(data));
 
 force_pio:
-	host->force_pio = true;
 	renesas_sdhi_internal_dmac_enable_dma(host, false);
 }
 
diff --git a/drivers/mmc/host/renesas_sdhi_sys_dmac.c b/drivers/mmc/host/renesas_sdhi_sys_dmac.c
index 5389c48..3c97831 100644
--- a/drivers/mmc/host/renesas_sdhi_sys_dmac.c
+++ b/drivers/mmc/host/renesas_sdhi_sys_dmac.c
@@ -213,10 +213,8 @@ static void renesas_sdhi_sys_dmac_start_dma_rx(struct tmio_mmc_host *host)
 		goto pio;
 	}
 
-	if (sg->length < TMIO_MMC_MIN_DMA_LEN) {
-		host->force_pio = true;
+	if (sg->length < TMIO_MMC_MIN_DMA_LEN)
 		return;
-	}
 
 	/* The only sg element can be unaligned, use our bounce buffer then */
 	if (!aligned) {
@@ -240,6 +238,7 @@ static void renesas_sdhi_sys_dmac_start_dma_rx(struct tmio_mmc_host *host)
 			desc = NULL;
 			ret = cookie;
 		}
+		host->dma_on = true;
 	}
 pio:
 	if (!desc) {
@@ -286,10 +285,8 @@ static void renesas_sdhi_sys_dmac_start_dma_tx(struct tmio_mmc_host *host)
 		goto pio;
 	}
 
-	if (sg->length < TMIO_MMC_MIN_DMA_LEN) {
-		host->force_pio = true;
+	if (sg->length < TMIO_MMC_MIN_DMA_LEN)
 		return;
-	}
 
 	/* The only sg element can be unaligned, use our bounce buffer then */
 	if (!aligned) {
@@ -318,6 +315,7 @@ static void renesas_sdhi_sys_dmac_start_dma_tx(struct tmio_mmc_host *host)
 			desc = NULL;
 			ret = cookie;
 		}
+		host->dma_on = true;
 	}
 pio:
 	if (!desc) {
diff --git a/drivers/mmc/host/tmio_mmc.h b/drivers/mmc/host/tmio_mmc.h
index 18b4308..1c3bdad 100644
--- a/drivers/mmc/host/tmio_mmc.h
+++ b/drivers/mmc/host/tmio_mmc.h
@@ -142,7 +142,7 @@ struct tmio_mmc_host {
 	struct tmio_mmc_data *pdata;
 
 	/* DMA support */
-	bool			force_pio;
+	bool			dma_on;
 	struct dma_chan		*chan_rx;
 	struct dma_chan		*chan_tx;
 	struct tasklet_struct	dma_issue;
diff --git a/drivers/mmc/host/tmio_mmc_core.c b/drivers/mmc/host/tmio_mmc_core.c
index a571106..38be3fc 100644
--- a/drivers/mmc/host/tmio_mmc_core.c
+++ b/drivers/mmc/host/tmio_mmc_core.c
@@ -364,7 +364,7 @@ static void tmio_mmc_pio_irq(struct tmio_mmc_host *host)
 	unsigned int count;
 	unsigned long flags;
 
-	if ((host->chan_tx || host->chan_rx) && !host->force_pio) {
+	if (host->dma_on) {
 		pr_err("PIO IRQ in DMA mode!\n");
 		return;
 	} else if (!data) {
@@ -436,7 +436,7 @@ void tmio_mmc_do_data_irq(struct tmio_mmc_host *host)
 	 */
 
 	if (data->flags & MMC_DATA_READ) {
-		if (host->chan_rx && !host->force_pio)
+		if (host->dma_on)
 			tmio_mmc_check_bounce_buffer(host);
 		dev_dbg(&host->pdev->dev, "Complete Rx request %p\n",
 			host->mrq);
@@ -473,7 +473,7 @@ static void tmio_mmc_data_irq(struct tmio_mmc_host *host, unsigned int stat)
 	if (stat & TMIO_STAT_CRCFAIL || stat & TMIO_STAT_STOPBIT_ERR ||
 	    stat & TMIO_STAT_TXUNDERRUN)
 		data->error = -EILSEQ;
-	if (host->chan_tx && (data->flags & MMC_DATA_WRITE) && !host->force_pio) {
+	if (host->dma_on && (data->flags & MMC_DATA_WRITE)) {
 		u32 status = sd_ctrl_read16_and_16_as_32(host, CTL_STATUS);
 		bool done = false;
 
@@ -497,7 +497,7 @@ static void tmio_mmc_data_irq(struct tmio_mmc_host *host, unsigned int stat)
 			tmio_mmc_disable_mmc_irqs(host, TMIO_STAT_DATAEND);
 			tmio_mmc_dataend_dma(host);
 		}
-	} else if (host->chan_rx && (data->flags & MMC_DATA_READ) && !host->force_pio) {
+	} else if (host->dma_on && (data->flags & MMC_DATA_READ)) {
 		tmio_mmc_disable_mmc_irqs(host, TMIO_STAT_DATAEND);
 		tmio_mmc_dataend_dma(host);
 	} else {
@@ -550,7 +550,7 @@ static void tmio_mmc_cmd_irq(struct tmio_mmc_host *host, unsigned int stat)
 	 */
 	if (host->data && (!cmd->error || cmd->error == -EILSEQ)) {
 		if (host->data->flags & MMC_DATA_READ) {
-			if (host->force_pio || !host->chan_rx) {
+			if (!host->dma_on) {
 				tmio_mmc_enable_mmc_irqs(host, TMIO_MASK_READOP);
 			} else {
 				tmio_mmc_disable_mmc_irqs(host,
@@ -558,7 +558,7 @@ static void tmio_mmc_cmd_irq(struct tmio_mmc_host *host, unsigned int stat)
 				tasklet_schedule(&host->dma_issue);
 			}
 		} else {
-			if (host->force_pio || !host->chan_tx) {
+			if (!host->dma_on) {
 				tmio_mmc_enable_mmc_irqs(host, TMIO_MASK_WRITEOP);
 			} else {
 				tmio_mmc_disable_mmc_irqs(host,
@@ -688,7 +688,7 @@ static int tmio_mmc_start_data(struct tmio_mmc_host *host,
 
 	tmio_mmc_init_sg(host, data);
 	host->data = data;
-	host->force_pio = false;
+	host->dma_on = false;
 
 	/* Set transfer length / blocksize */
 	sd_ctrl_write16(host, CTL_SD_XFER_LEN, data->blksz);
diff --git a/drivers/mmc/host/uniphier-sd.c b/drivers/mmc/host/uniphier-sd.c
index 1ee9fd0..91a2be4 100644
--- a/drivers/mmc/host/uniphier-sd.c
+++ b/drivers/mmc/host/uniphier-sd.c
@@ -157,13 +157,14 @@ static void uniphier_sd_external_dma_start(struct tmio_mmc_host *host,
 	if (cookie < 0)
 		goto unmap_sg;
 
+	host->dma_on = true;
+
 	return;
 
 unmap_sg:
 	dma_unmap_sg(mmc_dev(host->mmc), host->sg_ptr, host->sg_len,
 		     priv->dma_dir);
 force_pio:
-	host->force_pio = true;
 	uniphier_sd_dma_endisable(host, 0);
 }
 
@@ -283,9 +284,10 @@ static void uniphier_sd_internal_dma_start(struct tmio_mmc_host *host,
 	writel(lower_32_bits(dma_addr), host->ctl + UNIPHIER_SD_DMA_ADDR_L);
 	writel(upper_32_bits(dma_addr), host->ctl + UNIPHIER_SD_DMA_ADDR_H);
 
+	host->dma_on = true;
+
 	return;
 force_pio:
-	host->force_pio = true;
 	uniphier_sd_dma_endisable(host, 0);
 }
 
-- 
2.7.4


             reply	other threads:[~2018-10-12 15:04 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-10-12 15:03 Masahiro Yamada [this message]
2018-10-14 22:36 ` [PATCH] mmc: tmio: simplify the DMA mode test Wolfram Sang
2018-10-15 11:33   ` Wolfram Sang
2018-10-15 13:15 ` Ulf Hansson

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1539356588-18191-1-git-send-email-yamada.masahiro@socionext.com \
    --to=yamada.masahiro@socionext.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mmc@vger.kernel.org \
    --cc=linux-renesas-soc@vger.kernel.org \
    --cc=ulf.hansson@linaro.org \
    --cc=wsa+renesas@sang-engineering.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).